DOI QR코드

DOI QR Code

Development of 1/60th Scale Moving Model Rig Using the Compressed Air Launcher and One-Wire Guidance System of Train Model

압축공기 발사기에 단선 와이어 유도방식을 적용한 1/60축척 터널주행 열차모형 시험기 개발에 대한 연구

  • Published : 2001.05.01

Abstract

The test facility of a 1/60-scale model for train-tunnel systems has been recently developed to investigate the effects of tunnel portal shapes, hood shapes and air-shafts for reducing the micro-pressure waves radiating towards the surroundings from the tunnel exit. The present test rig has been advanced from a 1/70-scale facility at NLR in Netherlands. The NLR test rig has the two-wise guidance system that needs two ears attached on the external surface of a model train nose. Therefore, their train models have irregular nose shapes. The main characteristics of the present facility are that the train model is guided by only one wire from the compressed air launcher to the absorber parts of test facility and the wire guidance hole is located at the axial center of a train model. In the present test rig, after a train model is launched, the air jet from the launcher does not enter the tunnel model. Experimental results were compared with numerical predictions to prove the performance of the test facility.

Keywords

References

  1. Maeda, T., 1996, 'Review of Micro-pressure Wave Radiating from Tunnel Portal and Pressure Variation Under Train Passage,' RTRI report, Vol. 10 No.2, pp. 5-10 (In Japanese)
  2. Iida, M., Fukuda, T., Kikuchi, K., Murata, K., and Yamauchi, N., 1999, 'Infrasound Problems Occurring Near Tunnel Portals of High-speed Railway,' World Congress on Railway Research, Tokyo, Japan, October 19-23
  3. Maeda, T, 1994, 'The Final Report of Micro-pressure Wave Study for The Seoul-Pusan High-speed Railroad Project,' Japan Railway Technical Services Report
  4. Kobayashi, M., Suzuki, Y., Akutsu, K., and et al, 1991, 'New Ventilation System of SHINKANSEN Cars For Alleviation Aural Discomfort of Passengers,' Proceedings of the 7th International Symposium on Aerodynamics and Ventilation of Vehicle Tunnels, Elsevier, Brighton, pp. 205-218
  5. Burri, J. and Zumsteg, F., 1997, 'Airshafts for the Alleviation of Pressure Waves in Tunnels of the New Swiss Rail 2000,' Proceedings of the 9th International Conference on Aerodynamics and Ventilation of Vehicle Tunnels, Aosta Valley, Italy: 6-8 October, pp. 289-290
  6. Kim, D. H., Min, D. B., and Oh, I. G., 1999, 'Experimental Study of the Aerodynamic Countermeasures for Reducing the Micro-Pressure Waves and Pressure Fluctuations in High-Speed Train-Tunnel Interfaces,' World Congress on Railway Research, Tokyo, Japan, October 19-23
  7. Wolf, W. B. and Demmenie, E., 1997, 'A New Test Facility for The Study of Interacting Pressure Waves and Their Reduction in Tunnels for High-speed Trains,' Proceedings of the 9th International Conference on Aerodynamics and Ventilation of Vehicle Tunnels, Aosta Valley, Italy: 6-8 October, pp. 301-317
  8. Pope, C. W., 1991, 'The Simulations of Flows in Railway Tunnels Using a 1/25th Scale Moving Facility,' Proceedings of the 7th International Symposium on Aerodynamics and Ventilation of Vehicle Tunnels, Elsevier, Brighton, pp. 709-737
  9. Dayman, B. and Vardy, A. E., 1991, 'TRUNNEL, A Gun-Fired 0.5% Scale Facility for Pressure Transients of Very High Speed Trains in Tunnels,' Proceedings of the 7th International Symposium on Aerodynamics and Ventilation of Vehicle Tunnels, Elsevier, Brighton, pp. 757-787
  10. Takayama, K.. Sasoh, A., Onodera, O., Kaneko, R., and Matsui, Y., 1995, 'Experimental Investigation on Tunnel Sonic Boom,' Shock Waves, Springer Verlag, pp. 127-138 https://doi.org/10.1007/BF01435520
  11. Gerhart, P. M. and Gross, R. J., 1985, Fundamentals of Fluid Mechanics, Addison-Wesley Publishing Corporation, pp. 383-392
  12. Ozawa, S. and Maeda, T., 1988, 'Model Experiment on Reduction of Micro-Pressure wave Radiated from Tunnel Exit,' JSME, International Symposium on Scale Modeling, Tokyo, July 18-22
  13. 한국고속철도공단, 1996, 고속철도 차량시스템 엔지니어링, 제2권, 제70장
  14. 김희동, 1998, '관단으로부터 미소 압력파의 반사에 관한 기초적 연구,' 대한기계학회논문집 B권 제22권 제5호, pp. 618-626