• Journal of Korean Society of Environmental Engineers
• /
• 제27권4호
• /
• pp.353-361
• /
• 2005

In this study, we performed whole effluent toxicity(WET) test and compared the biological component analyses tests for some streams into which wastewater treatment plant effluents are discharged. The test procedures for the WET test and the biological component analysis were conducted according to U.S. EPA guidelines and the Ohio EPA wading method. The WET tests based on the test species of D. manga and S. capricornutum All treatment plants showed a S. capricornutum toxicity, and at 7 sites, except A and J, we could observe a D. magna toxicity. The highest toxicity was observed at site D and this were followed by E and F. The biological component analyses applied to the effluent discharged stream. We found that total species were low at sites C1, D1 and J1 and the low number of total individuals were observed at sites A1, C1, E1, H1, and J1 compared to the controls and other sites. The species richness was low at sites A1, B1, C1, D1, and J1. The species change was evident at site D(D1) and the tolerant species was predominant. The biological analyses and WET tests suggested that the effluents resulted in massive ecosystem impact.

• Journal of the Korea Society of Computer and Information
• /
• 제22권8호
• /
• pp.1-7
• /
• 2017

In this paper, we proposed the test equipment that can perform separate performance tests to mass-produce the Automatic Test Equipment. Until now, the performance test of the ATE has been performed after it has been assembled perfectly. It is possible to perform the performance test only when the external device manufacturing and setting of measurement resources and the internal wiring work have been completed. So we have been studying test equipment that separately tested the switching devices that played a key role in the performance of the ATE. To build the test equipment, we reviewed the circuit card assemblies that make up the switching devices. We designed a test equipment that satisfies the performance test and apply the completed test equipment to the actual production process to analyze whether it was effective in improving the time and workability of the performance test. The test equipment has the advantage that it can be used universally in the mass production process of ATE with the same type of switching device.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제53권11호
• /
• pp.139-147
• /
• 2016

This study described the design scheme for each step of the production test for the Fire Control System(FCS) of the K-55A1 PIP business of Hanwha Thales since 2011. From the time of receipt of the product It is necessary to improve the FCS's reliability by using the Unit Test, burn-In test, System Test. FCS of K-55A1 acts as a 'head' that control the self-propelled howitzer, and connected with the electrical and physical connection of self-propelled howitzer's multiple unit (Inertial navigation systems(IN), Muzzle Velocity Radar (MVR)) for the normal operation without an inch of error in operating. We designed the production testing equipment automatically as much as possible and designed with the environment similar to the self-propelled howitzer. by using this production testing equipment, It should help for the strengthen national defense of the Republic of Korea.

• Journal of Oriental Neuropsychiatry
• /
• 제18권1호
• /
• pp.1-14
• /
• 2007

Objective : The purpose of this study was to investigate the protective effects of Cheongsimondam-tang(COT) on the animal model of depression induced immobilization stress. Method 1) Male rats were used for this experiment. The subject were divided into 4 groups(1. normal 2. saline solution administered during immobilization stress treatment 3. COT of 100mg/kg administered 4. COT of 400mg/kg administered). 2) Immobilization stress was treated for 1 hours on day. During 2 days of immobilization stress treatment, they were executed forced swimming test, passive avoidance test, elevated plus maze test. Corticosterone in blood were measured Results 1) In EPM test, stress group showed significantly increased anxiety, COT groups showed significantly decreased anxiety. 2) In forced swimming test, COT groups did not show significantly decreased immobilization. 3) In passive avoidance test, stress group showed significantly decreased learning execution, COT groups showed significantly increased learning execution. 4) Stress group showed significantly increase in serum level of corticosterone, COT of 400mg/kg group showed significantly decreased serum level of corticosterone. Conclusion : These results suggest that Cheongsimondam-tang(COT) is effective in the treatment of depression.

• Korean Journal of Food Science and Technology
• /
• 제22권6호
• /
• pp.618-624
• /
• 1990

The antimutagenic effects of apple enzymatic browning reaction products(AEBRP) which resulted from the reaction of catechol, hydroquinone, homocatechol, hydroxyhydroquinone and pyrogallol with polyphenol oxidase extracted from apple(Jona gold) were investigated. Test strain used in SOS spot test and SOS chromotest was E. coli PQ 37/plasmid pKM 101. In SOS spot test, all of five AEBRPs showed strong antimutagenic effects on mytomycin C(MMC), 4-nitroquinoline-1-oxide(4NQO), N-me-thyl-N'-nitro-N-nitrosoguanidlne(MNNG) as increasing concentrations of AEBRP solution. In SOS chromotest, most of AEBRPs also showed strong antimutagenic effects on MMC, MNNG, 4NQO and 3-amino-1,4-dimethyl-5H-pyrido(4,3-b)indole (Trp-P-1), as increasing concentration of AEBRP solution.

• Journal of the Korean Society of Propulsion Engineers
• /
• 제18권6호
• /
• pp.59-67
• /
• 2014

Acceptance level random vibration and life firing test for development model of 1 N-class monopropellant thruster have been performed. From the results of random vibration, the natural frequency of the dual thurst module composed of 1 N-class development model thrusters was higher than the part level requirement(>100 Hz) and the structural robustness was verified. Thrust decrease of steady sate was below 7% and thrust instability was within ${\pm}5%$ in the life firing test using over 20 kg propellant throughput. The computerized tomography for catalyst bed showed a less than 7% of catalyst loss and it revealed the design appropriateness of the current thruster development model.

• Fire Science and Engineering
• /
• 제20권4호
• /
• pp.33-41
• /
• 2006

Nowadays in Korea, KS F 2271(Testing method for incombustibility of internal finish material and element of buildings) has been using for the evaluation of fire safety performance of sandwich panels. The test method in Japan and in Korea was based on the same way. When the Japanese standard building code was revised in 2000, the test method in the ISO 5660-1 was adopted for the test method for combustion performance of internal finishing materials and elements of buildings. According to this, the revision version of draft substituting the test method in the KS F 2271 for one in the ISO 5660-1(Cone Calorimeter method) is informed in Korea. In this study, combustion properties of sandwich panels were tested using the cone calorimeter method. Ignition time, peak heat release rate and total heat released of four sandwich panels and four core materials (thermal insulation material), which are widely used in Korea, were tested. Test results were analyzed for each specimen. Finally, test results were classified by Japanese standard building code and Canadian NBC revised.

• Journal of Korean Clinical Health Science
• /
• 제9권2호
• /
• pp.1493-1501
• /
• 2021

Purpose: The purpose of this study is to classify the characteristics of each item of CIST evaluation and to find out the degree of recognition of the characteristics of the cognitive tool. Methods: This study was conducted for occupational therapy majors at M University located in Gyeongsangnam-do. The data collection from May to June 2021. Total of 25 copies of the data were finally analyzed, SPSS Statistics 26 was used for data analysis. Results: As a result of the study, the significance level was visual reasoning 1 test strip and the visual reasoning 1 tool. In the relationship between the correspondence 1 figure simulation sheet and the figure simulation tool for each item and statistically significant, and the correspondence 2 visual reasoning 2 sheet. Visual reasoning 2 sheet and visual reasoning tool also showed that was found to be statistically significant. The correlation for visual reasoning 1 sheet and the visual reasoning 1 tool, reasoning 2 tool and visual reasoning 1 sheet, and the visual reasoning 2 tool and the verbal reasoning sheet. Conclusion: In this study, in the CIST items that may be difficult, it is better to attach the actual tool rather than the verbal explanation of the test paper to increase the efficiency of the test and the understanding of subjects with mild cognitive impairment. It was implemented by applying the tool, and it was found that the use of the tool in the visual reasoning item showed a high correlation by item. Furthermore, based on this study, it will be possible to suggest a method to control the difficulty of each subject of the cognitive evaluation tool, and to prepare a standard for future research.

• Animal Bioscience
• /
• 제35권7호
• /
• pp.1100-1108
• /
• 2022

Objective: The objective of this study was to evaluate the effect of waste cooking oil (WCO) addition on ammonia (NH₃) emissions during the composting of dairy cattle manure under two aeration conditions. Methods: The composting tests were conducted using the laboratory-scale composting apparatuses (14 L of inner volume). Three composting treatments (Control, WCO1.5, and WCO3, with WCO added at 0 wt%, 1.5 wt%, and 3 wt% of manure, respectively) were performed in two composting tests: aeration rate during composting was changed from 0.55 to 0.45 L/min in Test 1, and fixed at 0.3 L/min in Test 2, respectively. The NH₃ emitted and nitrogen losses during the composting were analyzed, and the effect of the addition of WCO on NH₃ emissions were evaluated. Results: Both tests indicated that the composting mixture temperature increased while the weight and water content decreased with increasing WCO content of the composting mixtures. On the other hand, the NH₃ emissions and nitrogen loss trends observed during composting in Tests 1 and 2 were different from each other. In Test 1, NH₃ emissions and nitrogen losses during composting increased with increasing WCO contents of the composting samples. Conversely, in Test 2, they decreased as the WCO contents of the samples increased. Conclusion: The WCO addition showed different effect on NH₃ emissions during composting under two aeration conditions: the increase in WCO addition ratio increased the emissions under the higher aeration rate in Test 1, and it decreased the emissions under the lower aeration rate in Test 2. To obtain reduction of NH₃ emissions by adding WCO with the addition ratio ≤3 wt% of the manure, aeration should be considered.

• Journal of the Korean Geotechnical Society
• /
• 제22권4호
• /
• pp.51-59
• /
• 2006

In this paper, the effect of variation of density and uniformity coefficient on shear strength was analyzed from the results of large scale shear test. In addition, the friction coefficient at critical state per vertical load was estimated using the equation proposed by Wood (1998). The test sample fur the test was obtained from the local quarry sites. Tests results show that the shear strength of $2.10g/cm^3$ is relatively larger than that of $1.85g/cm^3$ and uniformity coefficient (5.0) has larger shear strength than that in 10.0. In the meantime, the friction coefficient at critical state shows $1.0{\sim}1.6$ according to the test conditions.