• Journal of Korean Society on Water Environment
• /
• v.35 no.3
• /
• pp.257-270
• /
• 2019

Followingthe Four Rivers Project, cyanobacterial blooms have been frequently observed in the upstream of the installed weirs. The aim of this study was to characterize the major environmental factors that are associated with the cyanobacteria dominance in Baekje Weir (Geum River) and Juksan Weir (Youngsan River) based on intensive experiments and systematic data mining methods. The factors related to the cyanobacteria dominance include7-days cumulative rainfall (APRCP7), 7-days averaged flow (Q7day), water temperature (Temp), stratification strength (${\Delta}T$), electronic conductivity (EC), DO, pH, $NO_3-N$, $NH_3-N$, TN, TP, $PO_4-P$, Chl-a, Fe, BOD, COD, TOC, and $SiO_2$. The most highly correlatedfactors to the dominant cyanobacteria were found to be EC, Temp, Q7day, $PO_4-P$ in theBaekje Weir. On the other hand, those dominant in the Juksan Weir were ${\Delta}T$, TOC, Temp, EC and TN. The EC showed a strong correlation with cyanobacteria dominance in both weirs because a high EC represents a persisted low flow condition. The cyanobacteria dominance was as high as 56 % when the EC was equal or greater than $418{\mu}S/cm$ in Baekje Weir. It was as high as 63% when the ${\Delta}T{\geq}2.1^{\circ}C$ in the Juksan Weir. However, nutrients showed a minor correlation with cyanobacteria dominance in both weirs. The results suggest that the cyanobacteria dominate in astate where the water flow rate is low, water temperature is high and thermal stratification is strengthened. Therefore, the improvement of flow regimes is the most important to prevent persistent thermal stratification and formation of cyanobacteria bloom in theBaekje and JuksanWeirs.

• Journal of Convergence for Information Technology
• /
• v.11 no.7
• /
• pp.298-306
• /
• 2021

The purpose of this study was to examine the occupational risk factors that affect oral symptoms in hospital facility workers. This study surveyed 627 hospital facility temp·contract workers in the metropolitan area from November 17, 2020 to May 20, 2021. The results of the study indicate that oral symptoms were higher among workers with high risk of musculoskeletal disorders and injuries. Also, symptoms of oral mucosa, temporomandibular joint disorder, and dry mouth were high in the areas of job insecurity and organizational injustice. As the occupational risk factors and occupational stress of workers increased, the risk of oral symptoms increased. In the future, this study can be used as basic data for improving oral health policies to better the oral health of hospital facility workers.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.403-415
• /
• 2009

The purpose of the study is to establish the effect of different abutment shapes and types of cements on the retention of the full veneer casted gold crowns. Metal dies that has the similar shape with the implant abutment were manufactured using a short(5mm) and long(10mm) dies with different convergence angles. Metal dies and gold crowns, which were made from the metal dies, were cemented with Temp-bond, Temp-bond mixed with petroleum jelly, ZPC and Premier implant cement. After that, these were tested for tensile force at the point of separation. The effect of convergence angle changes of different cement types on the retention was studied as well as the effects of the cement type changes with different convergence angles on the retention. In addition, study about the marginal gap of Premier implant cement used for this experiment was conducted. The results are as followed under the in-vitro experimental limits; 1. The retention of the Temp-bond mixed with petroleum jelly decreased as the convergence angle increased, and the retention was weakest among the cements. 2. The retention of ZPC decreased as convergence angle increased. When convergence angle was 5 degrees, ZPC showed stronger retention than Premier implant cement. 3. Premier implant cement had the weakest retention when the convergence angle was 5 degrees but when the convergence angle was 10 degrees, it had the strongest retention. As the angle increased more than 10 degrees, the retention decreased. 4. Premier implant cement showed bigger marginal gap when the convergence angle was 5 degrees than 10 degrees under the experimental condition.

• Horticultural Science & Technology
• /
• v.28 no.5
• /
• pp.768-776
• /
• 2010

This study was conducted to predict number and fresh weight of leaves, and total leaf area of a single-stemmed rose 'Vital' based on the accumulated thermal units, and to develop a model of shoot development for the prediction of the time when the flowering shoot reaches a phenological stage in a plant factory system. The base temperature ($T_b$), optimum temperature ($T_{opt}$), and maximum temperature ($T_{max}$) were estimated by regressing the rate of shoot development against the temperature gradient. The rate of shoot development ($R$, $d^{-1}$) for the phase from cutting to bud break (CT-BB) was best described by a linear model $R_b$ ($d^{-1}$) = -0.0089 + $0.0016{\cdot}temp$. The rate of shoot development for the phase from bud break to harvest (BB-HV) was fitted to the parabolic model $R_h$ ($d^{-1}$) = $-0.0001{\cdot}temp^2$ + $0.0054{\cdot}temp$ - 0.0484. The $T_b$, $T_{opt}$, and $T_{max}$ values were 5.56, 27.0, and $42.7^{\circ}C$, respectively. The $T_b$ value was used in the thermal unit computations for the shoot development. Number of leaves, leaf area (LA), and leaf fresh weight showed sigmoidal curves regardless of the cut time. The shoot development and leaf area model was described as a sigmoidal function using thermal units. Leaf area was described as LA = 578.7 $[1+(thermal units/956.1)^{-8.54}]^{-1}$. Estimated and observed shoot length and leaf fresh weight showed a reasonably good fit with 1.060 ($R^2=0.976^{***}$) and 1.043 ($R^2=0.955^{***}$), respectively. The average thermal units required from cutting to transplant and from transplant to harvest stages were $426{\pm}42^{\circ}C{\cdot}d$ and $783{\pm}24^{\circ}C{\cdot}d$, respectively.

• Journal of Bio-Environment Control
• /
• v.24 no.4
• /
• pp.287-295
• /
• 2015

This study was conducted to find the suitability site selection for the construction of Saemangeum horticulture complex taking into account cost-effective environmental management by analyzing and comparing meteorological conditions. The study sites were regions around the Saemangeum area in which the development of an industrial complex extending 28,300 ha is planned. We collected meteorological data in 12 candidate sites and established a rating scheme and thematic maps. We selected ten themes by consulting experts using a questionnaire. Selected ten themes is Summer, 20 days max. temp. mean, Winter, 20 days min. temp. mean, Summer, 90 days temp. mean, Winter, 90 days temp. mean, Year-round, max. wind velocity, Year-round, wind velocity mean, Winter, 90 days solar radiation mean, Year-round, number of foggy days, Year-round, 1 day max. rainfall and Spring. 90 days humidity mean. And we set ratio-based weights for the evaluation parameters.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2008.05a
• /
• pp.23-29
• /
• 2008

- High Density Plasma Source-CCP-Dual/Triple, RF Frequency Control - Radical/Flux Analysis - Low Pressure Process - Chamber Design (Process gap/Wall gap) - Chamber Temp. Control. - ESC Dielectric Materials - Uniform Gas Injection

• Fire Protection Technology
• /
• s.16
• /
• pp.13-19
• /
• 1994

An Experimental study on the relation between responsiveness and elapse of years This experiment study is to appraise a fire detector's durability & reliability. Fire detector is located in office, temp range 10-27 고 65 15%, installed in the ceiling with power on. This is the experiment report of elapsed 5 years.

• Journal of the Korean Ceramic Society
• /
• v.25 no.6
• /
• pp.677-684
• /
• 1988

Titania powders were obtained from the various hydrolysis condition the variation of Alkoxide, water/Alcohol, REaction, Temp., reaction time and solvent system were investigated. In this result, spherical monodisperesed titania gel powders(≒0.7${\mu}{\textrm}{m}$) were obtained using EtOH(as solvent), and this method had rapid reaction time compare with iso-PrOH(as solvent).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.907-908
• /
• 2011

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.1 s.38
• /
• pp.17-22
• /
• 2006

Ferroelectric PZT thin films were formed by 2-step sputtering and their dielectric properties and conduction mechanisms were investigated. Also. donor impurity doping was tried to compensate the carriers in PZT thin films. The leakage current density was able to reduce to $10^{-7}A/cm^2$ order by 2-step sputtering with thickness control of room temp.-layer. The conduction mechanism was confirmed as bulk-limited, and optimum donor impurities on PZT thin film were taken. Especially, leakage current characteristics was improved to $10^{-8}A/cm^2$ order in donor-doped PZT thin films formed by 2-step sputtering.