• Journal of Microbiology and Biotechnology
• /
• 제33권7호
• /
• pp.895-908
• /
• 2023

Disposal of waste containing heavy metals into the environment is a major threat to human health and can result in toxic or chronic poisoning in aquatic life. In the current study, metal-resistant Raoultella ornithinolytica was isolated from metal-contaminated samples collected from the Tanjaro River, located southwest of Sulaymaniyah, Iraq. R. ornithinolytica was identified by partial amplification of 16S rRNA. The uptake potency of heavy metals was assessed using inductively coupled plasma-optical emission spectroscopy (ICP-OES) and indicated that R. ornithinolytica removed 67, 89, 63.4, 55.6, 56.5, 65, and 61.9% of Cd, Pb, Cr, Ni, Zn, Co, and Fe, respectively. These removal rates were influenced by temperature, pH, and contact time; at 35℃ and pH 5 with a change in the incubation time, the reduction rate improved from 89 to 95% for Pb, from 36.4 to 45% for Cu, and from 55.6 to 64% for Ni. Gene analysis indicated that R. ornithinolytica contained pbrT, chrB, nccA, iroN, and czcA genes, but the pcoD gene was absent. Energy-dispersive X-ray spectroscopy (EDS) images showed evidence of metal ion binding on the cell wall surface with different rates of binding. Transmission electron microscopy (TEM) detected different mechanisms for metal particle localization; cell surface adsorption was the main mechanism for Pb, Zn, and Co uptake, while Cd, Ni, and Fe were accumulated inside the cell. The current study describes, for the first time, the isolation of R. ornithinolytica from metal-contaminated water, which can be used as an eco-friendly biological expedient for the remediation and detoxification of metals from contaminated environments.

• 한국재료학회지
• /
• 제33권2호
• /
• pp.77-86
• /
• 2023

High-temperature oxidation of a Ni-based superalloy was analyzed with samples taken from gas turbine blades, where the samples were heat-treated and thermally exposed. The effect of Cr/Ti/Al elements in the alloy on high temperature oxidation was investigated using an optical microscope, SEM/EDS, and TEM. A high-Cr/high-Ti oxide layer was formed on the blade surface under the heat-treated state considered to be the initial stage of high-temperature oxidation. In addition, a PFZ (γ' precipitate free zone) accompanied by Cr carbide of Cr₂₃C₆ and high Cr-Co phase as a kind of TCP precipitation was formed under the surface layer. Pits of several ㎛ depth containing high-Al content oxide was observed at the boundary between the oxide layer and PFZ. However, high temperature oxidation formed on the thermally exposed blade surface consisted of the following steps: ① Ti-oxide formation in the center of the oxide layer, ② Cr-oxide formation surrounding the inner oxide layer, and ③ Al-oxide formation in the pits directly under the Cr oxide layer. It is estimated that the Cr content of Ni-based superalloys improves the oxidation resistance of the alloy by forming dense oxide layer, but produced the σ or µ phase of TCP precipitation with the high-Cr component resulting in material brittleness.

• 자원환경지질
• /
• 제49권1호
• /
• pp.13-22
• /
• 2016

이 연구는 사문석군 광물을 산 처리하고, 용출액을 pH 조절 하여 사문석군 광물로부터 규소와 철산화물 회수와 광물탄산화에 대해 연구하고자 하였다. 연구에 사용된 암석시료는 홍성 구항면에서 채취한 사문암으로 안티고라이트와 자철석로 구성되며, $SiO_2$(45.3 wt.%), MgO(41.3 wt.%), $Fe_2O_3$(12.2 wt.%)의 화학조성을 보였다. 자원회수실험은 $75{\mu}m$ 이하의 크기로 분쇄한 사문암을 1 M의 염산, 황산, 질산으로 각각 용해시켜 잔류물을 추출(1 단계)하였고, 남은 용출액에 $NH_4OH$를 추가하여 pH=8.6까지 상승시켜 형성된 붉은색 침전물을 회수(2 단계)하였다. 광물탄산화 실험은 침전물이 제거된 상층액에 $CO_2$를 주입한 후, pH=9.5까지 상승시켜 형성된 백색의 침전물을 회수(3 단계)하였다. 각 단계에서 회수된 잔류물과 침전물의 광물학적 특성을 확인하기 위해 XRD, TEM-EDS 분석을 실시했고, 용출액과 침전물이 제거된 상층액에 함유된 원소(Si, Mg, Fe)의 농도 변화는 ICP-AES 분석을 통해 확인했다. 용출된 금속은 Si, Fe, Mg이었다. 안티고라이트는 산과 반응한 후에도 판상을 유지하나 비정질실리카로 변했다(1 단계). pH=8.6에서 회수된 침전물은 Fe, Si, O로 구성된 비정질광물로, 2~10 nm 크기의 구형 나노물질이었다(2 단계). 마지막으로 $CO_2$를 주입한 후, pH=9.5에서 회수된 침전물은 nesquehonite[$Mg(HCO_3)(OH){\cdot}2(H_2O)$]와 lansfordite[$MgCO_3{\cdot}H_2O$]로 $1{\sim}6{\mu}m$ 크기를 가진 주상의 결정질광물이었다(3 단계). 따라서 산 처리된 사문석군 광물에서 나노물질의 실리카(잔류물)과 철산화물(침전물)을 회수가능하며, $CO_2$ 반응과 pH 조절을 이용하여 탄산염광물을 형성하였다. 회수된 실리카와 철산화물은 다른 물질로 합성하는 전구체로 유용하게 이용될 수 있으며, 이산화탄소를 이용한 광물탄산화 반응은 대기 중 이산화탄소 고정에 응용될 수 있을 것으로 기대된다.

• 광물과 암석
• /
• 제33권4호
• /
• pp.407-417
• /
• 2020

국내 폐슬레이트 발생량은 매년 증가 추세로 지정매립장 용량이 한계에 다다르고 있어 슬레이트를 대용량으로 안전하고 저렴하게 처리함과 동시에 재활용할 수 있는 방법이 필요하다. 이에 대한 대안으로 시멘트 소성로를 이용한 폐슬레이트 열처리 방법을 들 수 있다. 이 연구에서는 플라즈마를 이용하여 시멘트 소성로의 고온 환경을 모사할 수 있는 중간 규모(pilot scale)의 장치를 개발하고 이를 이용하여 폐슬레이트 내석면의 비활성화 및 시멘트 원료로의 재활용 가능성을 확인하고자 하였다. 중간규모 실험 장치는 플라즈마 토치를 이용하여 실제 소성로와 동일한 조건을 가지도록 1/50로 축소·제작하였다. 실험조건은 시멘트 소성로의 소성 시간과 동일하게 20분간 200-2,000℃까지 100℃ 간격으로 온도를 상승시키며 폐슬레이트의 비활성화 실험을 실시하였다. 플라즈마 고온반응기를 이용하여 열처리한 폐슬레이트의 XRD, PLM, TEM-EDS 분석결과, 1,500℃ 이상의 온도에서 슬레이트 내 백석면이 고토감람석으로 광물 상전이가 일어나 비활성화되고 시멘트 구성 광물인 라나이트(Ca2SiO4)가 형성됨을 확인하였다. 이 연구 결과는 추후 시멘트 소성로를 이용하여 대용량의 슬레이트를 경제적이고 안전하게 처리함과 동시에 시멘트 원료로 재활용할 수 있는 방안에 대한 기초자료로 활용할 수 있을 것으로 사료된다.

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1516-1522
• /
• 2014

A series of 20 wt % $(NH_4)_2SO_4$ and 3 wt % $Al_2O_3$ surface treatments were applied to $Li[Li_{0.2}Mn_{0.54}Co_{0.13}Ni_{0.13}]O_2$ substrates. The $Li[Li_{0.2}Mn_{0.54}Co_{0.13}Ni_{0.13}]O_2$ substrates were synthesized using a co-precipitation method. Sample (a) was left pristine and variations of the 20 wt % $(NH_4)_2SO_4$ and 3 wt % $Al_2O_3$ were applied to samples (b), (c) and (d). XRD was used to verify the space group of the samples as R$\bar{3}$m. Additional morphology and particle size data were obtained using SEM imagery. The $Al_2O_3$ coating layers of sample (b) and (d) were confirmed by TEM images and EDS mapping of the SEM images. 2032-type coin cells were fabricated in a glove box in order to investigate their electrochemical properties. The cells were charged and discharged at room temperature ($25^{\circ}C$) between 2.0V and 4.8V during the first cycle. The cells were then charged and discharged between 2.0V and 4.6V in subsequent cycles. Sample (d) exhibited lower irreversible capacity loss (ICL) in the first charge-discharge cycle as compared to sample (c). Sample (d) also had a higher discharge capacity of ~250 mAh/g during the first and second charge-discharge cycles when compared with sample (c). The rate capability of the $Al_2O_3$-coated sample (b) and (d) was lower when compared with sample (a) and (c). Sample (d), coated with $Al_2O_3$ after the surface treatment with $(NH_4)_2SO_4$, showed an improvement in cycle performance as well as an enhancement of discharge capacity. The thermal stability of sample (d) was higher than that of the sample (c) as the result of DSC.

• 한국미생물·생명공학회지
• /
• 제40권4호
• /
• pp.403-408
• /
• 2012

본 연구에서는 용액 중 플라즈마 공정을 이용하여 젤라틴/Ag 나노입자(AgNP) 용액을 제조하고 동결 건조하여 3차원 비계 형태의 생체복합재료를 성공적으로 제조하였다. 본 공정에서는 환원제 사용 없이 플라즈마 방전 중 수소 라디칼과 Ag 이온의 환원을 통해, 젤라틴 기지재 내에 지름 12~20 nm 크기의 구형 AgNP가 효과적으로 형성되었다. 젤라틴 농도가 높을수록(3%) AgNP의 분산안정성이 좋았으며, 3차원 비계 형태의 젤라틴의 미세공 조직이 작아지고 밀도가 높아지는 것으로 나타났다. 또한 AgNP의 농도가 높을수록(5 mM) 항균효과가 좋았는데, Ag5G3 생체복합재료를 사용했을 때 황색포도상구균의 생장은 44% 감소되었고, 대장균의 생장은 100% 감소되어 그람 음성균에 대한 항균력이 더 좋은 것으로 나타났다.

• Asian Journal of Atmospheric Environment
• /
• 제6권4호
• /
• pp.288-303
• /
• 2012

In this study, real time measurements of particle number size distribution in urban Gwangju, coastal Taean, and industrial Yeosu in Korea were conducted in 2008 to understand the occurrence of ultrafine particle (UFP) (<100 nm) events, the variation of its concentration among different sampling sites, and UFP formation pathways. Also, to investigate seasonal and long-term variation of the UFP number concentration, data were collected for the period of 5 years (2007, 2008, 2010, 2011, and 2012) in urban Gwangju. Photochemical and combustion events were found to be responsible for the formation of UFP in the urban Gwangju site, whereas only photochemical event led to the formation of UFP in the coastal Taean site. The highest UFP concentration was found in industrial Yeosu (the average UFP number fractions were 79, 59 and 58% in Yeosu, Gwangju, and Taean, respectively), suggesting that high amount of gas pollutants (e.g., $NO_2$, $SO_2$, and volatile organic carbon (VOC)) emitted from industries and their photochemical reaction contributed for the elevated UFP concentration in the industrial Yeosu site. The UFP fraction also showed a seasonal variation with the peak value in spring (61.5, 54.5, 50.5, and 40.7% in spring, fall, summer, and winter, respectively) at urban Gwangju. Annual average UFP number concentrations in urban Gwangju were $5.53{\times}10^3\;cm^{-3}$, $4.68{\times}10^3\;cm^{-3}$, $5.32{\times}10^3\;cm^{-3}$, $3.99{\times}10^3\;cm^{-3}$, and $2.16{\times}10^3\;cm^{-3}$ in the year 2007, 2008, 2010, 2011, and 2012, respectively. Comparison of the annual average UFP number concentration with urban sites in other countries showed that the UFP concentrations of the Korean sites were lower than those in other urban cities, probably due to lower source strength in the current site. TEM/EDS analysis for the size-selected UFPs showed that the UFPs were classified into various types having different chemical species. Carbonaceous particles were observed in both combustion (soot and organics) and photochemical events (sulfate and organics). In the photochemical event, an internal mixture of organic species and ammonium sulfate/bisulfate was identified. Also, internal mixtures of aged Na-rich and organic species, aged Ca-rich particles, and doughnut shaped K-containing particles with elemental composition of a strong C with minor O, S, and K-likely to be originated from biomass burning nearby agricultural area, were observed. In addition, fly ash particles were also observed in the combustion event, not in the photochemical event.

• 한국산업보건학회지
• /
• 제30권2호
• /
• pp.153-162
• /
• 2020

Objectives: 3D printing technologies have become widely developed and are increasingly being used for a variety of purposes. Recently, the evaluation of 3D printing operations has been conducted through chamber test studies, and actual workplace studies have yet to be completed. Therefore, the objective of this study was to determine the emission of volatile organic compounds(VOCs), metals, and particles from printing operations at a workplace. This included monitoring conducted at a commercial 3D printing service workplace where the processes involved material extrusion, material jetting, binder jetting, vat photo polymerization, and powder bed fusion. Methods: Area samples were collected with using a Tenax TA tube for VOC emission and MCE filter for metals in the workplace. For particle monitoring, Mini Particle Samplers(MPS) were also placed in the printer, indoor work area, and outdoor area. The objective was to analyze and identify particles' size, morphology, and chemical composition using transmission electron microscopy with energy dispersive spectroscopy(TEM-EDS) in the workplace. Results: The monitoring revealed that the concentration of VOCs and metals generated during the 3D printing process was low. However, it also revealed that within the 3D printing area, the highest concentration of total volatile organic compounds(TVOC) was 4,164 ppb at the vat photopolymerization 3D printing workplace, and the lowest was 148 ppb at the material extrusion 3D printing workplace. For the metals monitoring, chromium, which, is carcinogenic for humans, was detected in the workplace. As a characteristic of the particles, nano-sized particles were also found during the monitoring, but most of them were agglomerated with large and small particles. Conclusions: Based on the monitoring conducted at the commercial 3D printing operation, the results revealed that the concentration of VOCs and metals in the workplace were within Korea's occupational exposure limits. However, due to the emission of nano-sized particles during 3D printing operations, it was recommended that the exposure to VOCs and metals in the workplace should be minimized out of concern for workers' health. It was also shown that the characteristics of particles emitted from 3D printing operations may spread widely within an indoor workplace.

• 대한치과보철학회지
• /
• 제44권3호
• /
• pp.284-294
• /
• 2006

Statement of problem. Proliferation of Candida albicans is primarily within the plaque on the fitting surface of the denture rather than on the inflamed mucosa. Consequently, the treatment of the denture is equally important as treatment of the tissue. Cleansing and disinfection should be efficiently carried-out as the organisms can penetrate into the voids of the acrylic resin and grow in them, from which they can continue to infect and reinfect bearing tissues. Purpose. The purpose of this study was to evaluate the applicability of photocatalytic reaction to eliminate Candida albicans from acrylic resin denture base, and to investigate the anti-fungal effect with various UVA illumination time. Materials and Methods. The specimens were cured by the conventional method following the manufacturer's instruction using thermal polymerized denture base resin (Vertex RS: Dentimex, Netherlands). $TiO_2$ photocatalyst sol(LT), which is able to be coated at normal temperature, was made from the Ti-alkoxide progenitor. The XRD patterns, TEM images and nitrogen absorption ability of the $TiO_2$ photocatalyst sol(LT) were compared with the commercial $TiO_2$ photocatalyst P-25. The experimental specimens were coated with the mixture of the $TiO_2$ photocatalyst sol(LT) and binder material (silane) using dip-coater, and uncoated resin plates were used as the control group. Crystallinity of $TiO_2$ of the specimen was tested by the XRD. Size, shape and chemical compositions were also analyzed using the FE-SEM/ EDS. The angle and methylene blue degradation efsciency were measured for evaluating the photocatalytic activity of the $TiO_2$ film. Finally, the antifungal activity of the specimen was tested. Candida albicans KCTC 7629(1 ml, initial concentration $10^5$ cells/ ml) were applied to the experiment and control group specimens and subsequently two UVA light source with 10W, 353 nm peak emission were illuminated to the specimens from 15cm above. The extracted $2{\mu}l$ of sample was plated on nutrient agar plate ($Bacto^{TM}$ Brain Heart Infusion; BD, USA) with 10 minute intervals for 120 minute, respectively. It was incubated for 24 hours at $37^{\circ}C$ and the colony forming units (CFUs) were then counted. Results. Compared the characteristics of LT photocatalyst with commercial P-25 photocatalyst, LT were shown higher activity than P-25. The LT coated experimental specimen surface had anatase crystal form, less than 20 nm of particle size and wide specific surface area. To evaluate the photocatalytic activity of specimens, methylene blue degradation reaction were used and about 5% of degradation rate were measured after 2 hours. The average contact angle was less than $20^{\circ}$ indicating that the LT photocatalyst had hydrophilicity. In the antifungal activity test for Candida albicans, 0% survival rate were measured within 30 minute after irradiation of UVA light. Conclusion. From the results reported above, it is concluded that the UVA-LT photocatalytic reaction have an antifungal effect on the denture surface Candida albicans, and so that could be applicable to the clinical use as a cleaning method.

• 한국재료학회지
• /
• 제30권8호
• /
• pp.383-392
• /
• 2020

In this paper, AgCl/Ag₃PO₄/diatomite photocatalyst is successfully synthesized by microemulsion method and anion in situ substitution method. X-ray diffraction (XRD), photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and ultraviolet-visible spectroscopy (UV-Vis) are used to study the structural and physicochemical characteristics of the AgCl/Ag₃PO₄/diatomite composite. Using rhodamine B (RhB) as a simulated pollutant, the photocatalytic activity and stability of the AgCl/Ag₃PO₄/diatomite composite under visible light are evaluated. In the AgCl/Ag₃PO₄/diatomite visible light system, RhB is nearly 100 % degraded within 15 minutes. And, after five cycles of operation, the photocatalytic activity of AgCl/Ag₃PO₄/diatomite remains at 95 % of the original level, much higher than that of pure Ag₃PO₄ (40 %). In addition, the mechanism of enhanced catalytic performance is discussed. The high photocatalytic performance of AgCl/Ag₃PO₄/diatomite composites can be attributed to the synergistic effect of Ag₃PO₄, diatomite and AgCl nanoparticles. Free radical trapping experiments are used to show that holes and oxygen are the main active species. This material can quickly react with dye molecules adsorbed on the surface of diatomite to degrade RhB dye to CO₂ and H₂O. Even more remarkably, AgCl/Ag₃PO₄/diatomite can maintain above 95 % photo-degradation activity after five cycles.