• 대한화학회지
• /
• 제40권3호
• /
• pp.173-179
• /
• 1996

투과전자현민경(TEM)을 사용하여 실험 변수에 따른 베시클의 크기와 베시클간의 응집을 관찰하였다. 조절된 변수로는 (a) 반응온도의 변화, (b) Phosphatidylcholine 농도의 변화, (c) Phosphatidylcholine의 농도(0.39mM)를 일정하게 유지했을 때 알루미늄 이온의 농도변화:0.01, 0.05, 0.1, 0.2 M, (d) $Al(NO_3)_3{\cdot}9H_2O$에 Phosphatidylcholine을 1 wt%로 고정하여 이들의 농도 증가에 따른 전체농도의 변화 등을 실험한 결과 베시클크기와 베시클간의 응집이 관찰되었다. 반응온도가 증가할수록 Phosphatidylcholine 농도가 증가할수록 베시클의 크기가 감소되었다. 알루미늄 이온농도가 0.2M일 때 입자간의 응집과 합체로 비정상 베시클 성장이 관찰되었다. $Al(NO_3)_3{\cdot}9H_2O$에 대한 Phosphatidylcholine비가 1 wt%일 때 최적의 베시클 크기와 균일한 분포를 얻을 수 있었다.

• Applied Microscopy
• /
• 제34권1호
• /
• pp.23-29
• /
• 2004

본 연구에서는 에너지 여과장치와 직접 고온 가열 장치를 이용하여 실리카 나노입자의 비정질 구조 분석과 가열실험을 통한 구조변화에 대해 연구하였다. 실리카 나노입자의 전자회절도형은 세 개의 diffuse한 ring으로 구성이 되어 있으며, $900^{\circ}C$의 온도에서 실리카 나노입자는 서서히 결정화가 이루어짐을 알 수가 있었다. 세 개의 diffuse한 ring은 비정질 실리카 구조가 $SiO_4$ tetrahedra가 구조의 기본 단위로 이루어졌으며, 가열에 의해 이들이 점이적으로 tridymite 이상적인 층상 구조로 결정화되어 간다는 것을 이해할 수 있었다. 또한 전자현미경 내의 고진공하에서 $850^{\circ}C$ 이상의 온도 가열로 인해 $SiO_2$로부터 증발된 SiO가 grid에 재증착되는 것을 관찰할 수 있었고, 남아 있는 $SiO_2$는 전기로를 이용한 가열 실험결과와 같이 비정질 구조에서 orthorhombic trydimite로의 결정화가 이루어짐을 알 수 있었다.

• Applied Microscopy
• /
• 제49권
• /
• pp.3.1-3.7
• /
• 2019

Graphene, which is one of the most promising materials for its state-of-the-art applications, has received extensive attention because of its superior mechanical properties. However, there is little experimental evidence related to the mechanical properties of graphene at the atomic level because of the challenges associated with transferring atomically-thin two-dimensional (2D) materials onto microelectromechanical systems (MEMS) devices. In this study, we show successful dry transfer with a gel material of a stable, clean, and free-standing exfoliated graphene film onto a push-to-pull (PTP) device, which is a MEMS device used for uniaxial tensile testing in in situ transmission electron microscopy (TEM). Through the results of optical microscopy, Raman spectroscopy, and TEM, we demonstrate high quality exfoliated graphene on the PTP device. Finally, the stress-strain results corresponding to propagating cracks in folded graphene were simultaneously obtained during the tensile tests in TEM. The zigzag and armchair edges of graphene confirmed that the fracture occurred in association with the hexagonal lattice structure of graphene while the tensile testing. In the wake of the results, we envision the dedicated preparation and in situ TEM tensile experiments advance the understanding of the relationship between the mechanical properties and structural characteristics of 2D materials.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1986년도 춘계학술발표회 논문집
• /
• pp.194-197
• /
• 1986

The normal mode parameters of microstrip coupled lines are datermined from the self and mutual capacitance and inductance of microstrip lines. In this paper, these capacitance are computed by using the relaxation method based on Quas1-TEM model for shoelded structure. Using these results, the normal mode parameters of two and three microstrip coupled lines are obtained.

• 대한임상검사과학회지
• /
• 제38권1호
• /
• pp.26-33
• /
• 2006

Recently, the rapid increase in extended-spectrum ${\beta}$-lactamase (ESBL) producing clinical isolates has become a serious problem. In this study, the epidemiologic features and molecular characteristics of ESBL among clinical isolates of Escherichia coli and Klebsiella pneumoniae, antibiotic susceptibility testing, genotype of the ESBL and patterns of chromosomal DNA from PFGE (pulsed field gel electrophoresis) were observed. A total of 53 ESBL-producing clinical isolates (30 of E. coli and 23 of Klebsiella pneumoniae) were collected from two university hospitals in the period of June to July in 2002 and 2003 respectively. The antibiotic resistance frequency of those 53 strains was tested by the disk agar diffusion method with the result that all the strains were resistant to cephalothin. To other antibiotics, the resistance rates of E. coli (30 isolates) were in order of ceftazidime (90.0%), cefotaxime and aztreonam (respectively 83.3%). Also, the resistance rates of K. pneumoniae (23 isolates) were in order of aztreonam (78.3%), ceftazidime (73.9%) and cefotaxime (65.3%). Also the sensitivity of ceftazidime-clavulanic acid were 100% in E. coli and 95.7% in K. pneumoniae. And the sensitivity of cefotaxime-clavulanic acid was 96.7% in E. coli and 91.3% in K. pneumoniae. The types of the ESBL genes were determined by using polymerase chain reaction (PCR). Among the 30 isolates of ESBL-producing E. coli, 6 (20.0%) have SHV only, 5 (16.7%) have TEM only and, 18 (60.0%) have both of TEM and SHV. Among the 23 isolates of ESBL-producing K. pneumoniae, 7 (30.4%) have SHV only, 2 (8.7%) have TEM only, and 14 (60.9%) have both of TEM and SHV. These results show that 52 strains, with only one exception, were confirmed as either TEM or SHV. The patterns of Xba I-digested chromosomal DNA of ESBL-producing E. coli and K. pneumoniae isolates were analyzed by PFGE. PFGE patterns of E. coli and K. pneumoniae were multiclonal, but many strains were grouped into a few types. Therefore, it seems that there were clonal outbreaks or possible horizontal spread. In conclusion, the TEM and SHV ${\beta}$-lactamase are most widely spread in E. coli and K. pneumoniae in Korea. As these types are usually carried by plasmids, the spread of these ${\beta}$-lactamase genes could compromise the future usefulness of third generation cephalosporins for the treatment of infections caused by E. coli and K. pneumoniae.

• Molecules and Cells
• /
• 제21권2호
• /
• pp.251-260
• /
• 2006

During mitosis, genomic integrity is maintained by the proper coordination of anaphase entry and mitotic exit via mitotic checkpoints. In budding yeast, mitotic exit is controlled by a regulatory cascade called the mitotic exit network (MEN). The MEN is regulated by a small GTPase, Tem1p, which in turn is controlled by a two-component GAP, Bfa1p-Bub2p. Recent results suggested that phosphorylation of Bfa1p by the polorelated kinase Cdc5p is also required for triggering mitotic exit, since it decreases the GAP activity of Bfa1p-Bub2p. However, the dispensability of GEF Lte1p for mitotic exit has raised questions about regulation of the MEN by the GTPase activity of Tem1p. We isolated a Bfa1p mutant, $Bfa1p^{E438K}$, whose overexpression only partially induced anaphase arrest. The molecular and biochemical functions of $Bfa1p^{E438K}$ are similar to those of wild type Bfa1p, except for decreased GAP activity. Interestingly, in $BFA1^{E438K}$ cells, the MEN could be regulated with nearly wild type kinetics at physiological temperature, as well as in response to various checkpoint-activating signals, but the cells were more sensitive to spindle damage than wild type. These results suggest that the GAP activity of Bfa1p-Bub2p is responsible for the mitotic arrest caused by spindle damage and Bfa1p overproduction. In addition, the viability of cdc5-2 ${\Delta}bfa1 $ cells was not reduced by $BFA1^{E438K}$, suggesting that Cdc5p also regulates Bfa1p to activate mitotic exit by other mechanism(s), besides phosphorylation.

• Applied Microscopy
• /
• 제36권2호
• /
• pp.47-55
• /
• 2006

이 논문에서 Al-2.5Cu-1.5Mg wt.% 합금에서 미세한 Cu 석출물에 대한 투과전자현미경 관찰이 보고 되었다. 이 새로운 관찰은 시료에 오염된 산화물을 제거하기 위해 ion milling을 하고 곧바로 시료 관찰을 했을 때 우연히 이루어 졌다. 특히 이 Cu석출물은 $150^{\circ}C$에서 100시간 aging한 시료에서 분명하게 관찰되었다. 그리고 ion milling 전 시료표면에서 분명히 관측되는 산화물은 $Cu_2O$임이 확실히 밝혀졌다. 이러한 분석과정은 회절 환 패턴의 정밀 분석을 요구함으로 이에 대한 시뮬레이션에 필요한 이론적 공식도 만들었다. 마지막으로 이 합금에 대한 예기치 않은 ion milling효과와 그 중요성이 논의되었다.

• 한국재료학회지
• /
• 제25권9호
• /
• pp.455-461
• /
• 2015

SnS-$TiO_2$ nanocomposites are synthesized using simple, cheap, and less toxic $SnCl_2$ as the tin (II) precursor. The prepared nanoparticles are characterized using powder X-ray diffraction (XRD), transmission electron microscopy (TEM), and UV-Vis diffuse reflectance spectra (DRS). The XRD and TEM results indicate that the prepared product has SnS nanoparticles and a grain diameter of 30 nm. The DRS demonstrate that SnS-$TiO_2$ possesses the absorption profile across the entire visible light region. The generation of reactive oxygen species is detected through the oxidation reaction from 1,5-diphenyl carbazide (DPCI) to 1,5-diphenyl carbazone (DPCO). It is found that the photocurrent density and photocatalytic effect increase with the modified SnS. Excellent catalytic degradation of Texbrite BA-L (TBA) solution is observed using the SnS-$TiO_2$ composites under visible light irradiation. It is proposed that both the strong visible light absorption and the multiple exciton excitations contribute to the high visible light photocatalytic activity.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.121-121
• /
• 2000

반도체 산업의 발달에 따라 소자의 보다 빠른 동작 속도와 큰 집적도를 갖은 ULSI 구조를 얻기 위해, 새로운 금속배선 재료가 요구되고 있다. 기존의 금속 배선인 Al 및 Al 합금은 비교적 낮은 비저항과 박막형성의 용이함으로 인하여 현재까지 금속배선 재료로 사용되고 있으나, 고집적화에 따라 RC Time Delay와 Electromigration의 문제점을 들어내었다. 이러한 문제를 해결할 새로운 배선 재료로 Al보다 낮은 비저항을 가지며, electromigration 저항성을 갖는 Cu 금속배선 재료가 활발히 연구되고 있다. 본 실험에서는 (100) Si 웨이퍼를 기판으로 사용하였으며, 각층은 SiO2/Si3N4/EP Cu/Seed Cu/ TaN/SiO2/Si wafer 상태로 증착하였다. 확산방지막으로 TaN을 사용하였고, seed Cu는 sputtering 으로 증착하였으며, seed Cu 만으로 된 박막과 seed Cu + electro plating Cu로 구성된 박막을 제작하였다. 제작 완료된 박막은 N2 분위기에서 20$0^{\circ}C$ 120 min, 45$0^{\circ}C$ 60min 동안 열처리하여 Cu 박막의 조직 변화를 TEM 및 여러 분석방법을 이용하여 분석하였다. Plan-view TEM결과, 45$0^{\circ}C$, 60min 열처리함에 따라 결정립 성장이 일어난 것을 확인 할 수 있었다. 그러나, 성장후에도 twin boundary, stacking fault, dislocation, small defect 등은 여전히 남아 있음이 관찰된다. 그림 1(a)는 as-deposit 상태이며, 그림 1(b)는 45$0^{\circ}C$, 60min 열처리한 plan-view TEM 사진이다.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권9호
• /
• pp.933-941
• /
• 1996

In this study, the Tx(Transmitting) and Rx(Receiving) band pass filter for personal communication services was constructed and designed using .lambda./4 TEM mode dielectric resonators. Band pass filter was composed of ceramics resonators which has been developed using ($Zr_{0.65}$,$Sn_{0.35}$) $Ti_{1.04}$ $O_{4.04}$ ceramic and Unloaded-Q ( $Q_{o}$) of .lambda./4 TEM mode dielectric resonator with inner hole size 0.9mm and external size 3mm using silver electrode is 354.5 at 1.95GHz. For the band pass filter design and construction, the design theory and simulation results of band pass filter using J-inverter theory have been studied. The parameters which are evaluated by design theory are practically applied to the filter construction and the simulation results are in agreement with the measured results after fine tunnings.s.s.s.s.s.