• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.107-112
• /
• 1994

The phase transition and the surface and interface morphologies of $TiSi_2$ formed on atomically clean Si substrates are investigated. 200$\AA$ Ti and 400$\AA$ Si films on Si(ll1) have been codeposited at elevated temperatures (400~$800^{\circ}C$) in ultrahigh vacuum. The phase transition of TiSiL is characterized with using XRD. The results distinguish the formation of the C49 and C54 crystalline titanium silicides. The surface and interface morphologies of titanium silicides have been examined with SEM and TEM. A relatively smootb surface is observed for the C49 phase while a rough surface and interface are observed for C54 phase. The islanding of the C54 phase becomes severe at high temperature ($800^{\circ}C$). Islands of TiSiL have been observed at temperatures above $700^{\circ}C$ but no islands are observed at temperatures below $600^{\circ}C$. For films deposited at $400^{\circ}C$ and 500%. weak XRD peaks corresponding to TiSi were observed and TEM micrographs exhibited small crystalline regions of titanium silicide at the interface.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.1
• /
• pp.91-106
• /
• 2003

XRD results on annealing studies of Na-feldspars (Amelia albite) show rapid changes in the lattice parameters of the $1073^{\circ}C$-heated samples owing to disordering of Al and Si as well as lattice distortions upon quenching of the heated specimens. While a low albite transformed to a high albite by 7-days annealing at $1073^{\circ}C$, it remains as an early intermediate albite even by 140-days annealing at $924^{\circ}C$ due to the slower Al-Si disordering rate. From the heated samples tweed structures of $100∼200\AA$ were typically observed by TEM, which showed different ways of development between the $1073^{\circ}C$ -heated one and the $923 ^{\circ}C$ -heated one. The former locally trans-farmed to rnicrostructures similar to albite twin, while the latter transformed to domain structures containing albite twin plane in the wider area. The origin of tweed structures is suggested to be formation of incipient twins (albite twin and pericline twin) to reduce the lattice instability which is increased by disordering of Al and Si as well as quenching.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.16-22
• /
• 2008

We fabricated thermally-evaporated 10 nm-Ni/30 nm and 70 nm Poly-Si/200 nm-$SiO_2/Si$ structures to investigate the thermal stability of nickel silicides formed by rapid thermal annealing(RTA) of the temperature of $300{\sim}1100^{\circ}C$ for 40 seconds. We employed for a four-point tester, field emission scanning electron microscope(FE-SEM), transmission electron microscope(TEM), high resolution X-ray diffraction(HRIXRD), and scanning probe microscope(SPM) in order to examine the sheet resistance, in-plane microstructure, cross-sectional microstructure evolution, phase transformation, and surface roughness, respectively. The silicide on 30 nm polysilicon substrate was stable at temperature up to $900^{\circ}C$, while the one on 70 nm substrate showed the conventional $NiSi_2$ transformation temperature of $700^{\circ}C$. The HRXRD result also supported the existence of NiSi-phase up to $900^{\circ}C$ for the Ni silicide on the 30 nm polysilicon substrate. FE-SEM and TEM confirmed that 40 nm thick uniform silicide layer and island-like agglomerated silicide phase of $1{\mu}m$ pitch without residual polysilicon were formed on 30 nm polysilicon substrate at $700^{\circ}C\;and\;1000^{\circ}C$, respectively. All silicides were nonuniform and formed on top of the residual polysilicon for 70 nm polysilicon substrates. Through SPM analysis, we confirmed the surface roughness was below 17 nm, which implied the advantage on FUSI gate of CMOS process. Our results imply that we may tune the thermal stability of nickel monosilicide by reducing the height of polysilicon gate.

• Korean Journal of Veterinary Service
• /
• v.32 no.3
• /
• pp.227-239
• /
• 2009

At the present study, it was aimed to detect virulence genes and antimicrobial resistance genes among 102 strains of 12 Salmonella serotypes isolated from pigs and cattle. In polymerase chain reaction (PCR), invA was detected from all strains of Salmonella spp., spvC was detected from Salmonella enterica serotype Enteritidis (S. Enteritidis) (100%), S. Bradenburg (75%), and S. Typhimurium (20.4%). Drug resistance related genes of 12 types were detected from all strains. TEM ($bla_{TEM}$) gene was detected from 51 (92.7%) of 55 $\beta$-lactams (54 ampicillin or 1 amoxicillin) resistance strains. 55 (100%) of 55 chloramphenicol resistance strains, 3 (100%) of 3 gentamicin resistance strains and 5 (100%) of 5 kanamycin resistance strains did contain cml, aadB, and aphA1-Iab, respectively. strB (89.9%), strA (88.4%), aadA2 (84.1%) and aadA1 (72.5%) were detected from 69 streptomycin resistance strains. sulII and dhfrXII were detected from 49 (100%) of 49 sulfamethoxazole/trimethoprim resistance strains, but sulI was not detected. tetA (97.9%) and tetB (21.6%) were detected from 97 tetracycline resistance strains. int gene was detected from 58 (56.9%) of 102 strains. 54 S. Typhimurium of 102 Salmonella spp. were attempted to detect drug resistance genes. TEM was detected from 44 (95.7%) of 46 $\beta$-lactams (45 ampicillin or 1 amoxicillin) resistance strains. cmlA was detected from 51 (100%) of 51 chloramphenicol resistance strains. aadA2 (100%), strA (100%), strB (100%), and aadA1 (79.6%) were detected from 54 streptomycin resistance strains. sulII (100%) and dhfrXII (100%) were detected from 49 sulfamethoxazole/trimethoprim resistance strains. tetA was detected from 54 (100%) of 54 tetracycline resistance strains. int gene was detected from 54 (100%) of 54 strains. The major drug resistance pattern and resistance gene profile were ampicillin, chloramphenicol, streptomycin, sulfamethoxazole/trimethoprim and tetracycline (ACSSuT) and TEM, cmlA, aadA1, aadA2, strA, strB, sulII, dhfrXII, tetA and int, respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.5
• /
• pp.547-553
• /
• 2016

Black carbon (BC) contained in particulate matter (PM) originating from the exhaust gases of ships' diesel engines has been receiving great attention as a cause of glacial melting and warming in the polar regions. In this study, we took samples from various locations of PM emitted from the training ship (T/S) HANBADA's main engine, in cooperation with the Korea Maritime and Ocean University. We analyzed the structure and characteristics of these samples using high-resolution transmission electron microscopy (HR-TEM) and applied our findings as fundamental research for developing PM reduction technology. We also employed our results to determine appropriate preemptive action to meet upcoming PM/BC regulations. In addition, we confirmed the emission trend of pollutants from exhaust gases under various engine operating conditions using an exhaust gas analyzer. Results obtained from the analysis of HR-TEM images showed that the structure of the PM is chain-like wispy agglomerates consisting of a number of individual spherical particles. As the sampling location was moved away from the turbo charger (T/C) towards the funnel, more condensates were observed at a low temperature and the molecular structure of the PM lost its characteristic BC structure as an amorphous structure gradually appeared. Furthermore, through the analysis of exhaust gases, we predicted a decrease in PM concentration in the exhaust stream as engine rpm increase.

• Journal of the Korean Magnetics Society
• /
• v.12 no.4
• /
• pp.127-131
• /
• 2002

We fabricated MTJ devices that have doubly oxidized tunnel barrier using plasma oxidation method to from oxidized AlO$\sub$x/ tunnel barrier. Doubly oxidation I, which sputtered 10 ${\AA}$-bottom Al layer and oxidized it with oxidation time of 10 s. Subsequent sputtering of 13 ${\AA}$-Al was performed and the metallic layer was oxidized for 50, 80 and 120 s., respectively. Doubly oxidation II, which sputtered 10 ${\AA}$-bottom Al layer and oxidized it varying oxidation time for 30∼120 s. Subsequent sputtering of 13 ${\AA}$-Al was performed and the metallic layer was oxidized for 210 sec. Double oxidation process specimen showed MR ratio of above 27％ in all experiment range. Singly oxidation process. 13 ${\AA}$-Al layer and oxidized up to 210 s, showed less MR ratio and more narrow process window than those of doubly oxidation. Cross-sectional TEM images would that doubly oxidized barrowers were thinner and denser than singly oxidized ones. XPS characterization confirmed that doubly oxidation of Fe with bottom insulating layer. As a result, doubly oxidation could have superior MR ratio in process extent during long oxidation time because of preventing oxidation of bottom magnetic layer than singly oxidation.

• Korean Journal of Materials Research
• /
• v.10 no.7
• /
• pp.499-504
• /
• 2000

Recently there have been many investigations on the synthesis and properties of transition metal trialuminides based on Ti, Zr, V, Nb and Ta for use aircraft structure materials in an elevated environment. The effect of Zr additions on the formation behaviour of Al-Nb alloy was investigated. Al-1.3at.%(Nb+Zr) alloys with different Nb to Zr atomic 1:3, 1:1 and 3:1 were prepared by mechanical alloying(MA). The morphological changes and microstructural evolution of Al-Nb-Zr powders during MA were investigated by SEM, XRD and TEM. The intermetallic compound phase of $Nb_2Al\; and\; Al_3Zr_4$ was identified by X-ray diffraction. The intemetallic compound of $Al_3Zr,\; Al_3Nb$ and $Al_3Zr_4$ were formed by heat treatment for 1 hour at $500^{\circ}C$. The size of intermetallic compounds observed by TEM were approximately below 100nm, when they were heat treated after mechanically alloying for 30 hours.

• Journal of the Korean Chemical Society
• /
• v.53 no.6
• /
• pp.677-682
• /
• 2009

ZnS:Mn/ZnS core-shell quantum dots (QDs), were synthesized via a thermal decomposition reaction of organometallic precursors in a hot solvent mixture. The synthetic conditions of the quantum dots were monitored at various reaction temperatures for the core formation, while the shell formation temperature was fixed at 135$^{\circ}C$. The obtained colloidal nanocrystals at corresponding temperatures were characterized by UV-Vis, solution photoluminescence (PL) spectroscopies, and further obtained powders were characterized by XRD, HR-TEM, and EDXS analyses. The synthetic temperature condition to obtain the best PL emission intensity for the core-shell QD was 135$^{\circ}C$, for both core and shell formation. At this temperature, solution PL spectrum showed a narrow emission peak at 583 nm with a relative PL quantum efficiency of 42.15%. In addition, the measured spherical particle sizes for the ZnS:Mn/ZnS nanocrystals via HR-TEM were in the range of 4.0 to 5.4 nm, while ellipsoidal particles were obtained at 150$^{\circ}C$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.5
• /
• pp.188-192
• /
• 2016

In this work, the SiC powders were synthesized through the carbonized matter from the mixture of silica powder and rice husks. The SiC powders, obtained from the carbothermal reduction reaction of silica and carbonized rice husks, were investigated by XRD patterns, XPS, FE-SEM and FE-TEM. In the XRD patterns, the specimens showed clearly very high strong peak of (111) plane near $35^{\circ}$ as well as weak (220) and (311) peak respectively at approximately $60^{\circ}$ and $72^{\circ}$. Under Ar atmosphere, the power synthesized from the mixture (in case of mixing ratio, 6 : 4) of carbonized rice husks and silica showed mainly cubic SiC crystalline phase showing relatively lower ratio of hexagonal phase without residual carbon in XRD pattern. In the TEM analysis, the specimen, synthesized from carbonized rice husks and silica with mixing ratio of 6 : 4 under Ar atmosphere, showed relatively fine particles under $5{\mu}m$ and a crystalline SiC phase of (100) diffraction pattern.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1191-1196
• /
• 2013

Among Gram-negative pathogens in Korea, the incidence of resistance to third generation cephalosporins is becoming an ever-increasing problem. The production of extended-spectrum ${\beta}$-lactamase (ESBL) is the main mechanism of bacterial resistance to a third-generation cephalosporins and monobactams. Accurate identification of the ESBL genes are necessary for surveillance and epidemiological studies of the mode of transmission in the hospital. This study was conducted to detect the genes encoding ESBL of 46 K. penumoniae isolated from Daejeon, Chungnam and Chungbuk regional university hospitals from February to August in 2012. The phenotypes of the isolated specimens were examined according to the combination disc test (CDT) by the Clinical and Laboratory Standards Institute (CLSI). Forty two ESBL producing K. penumoniae isolates could be detected using ceftazidime (CAZ) discs with and without clavulanate (CLA). By CDT, 42 K. pneumoniae strains were confirmed to be ESBL strains. Genotyping was performed by multiplex PCR with type-specific primers. By PCR analysis, TEM gene in 46 strains, SHV gene in 37 strains and CTX-M genes in 14 strains were identified. Ten isolates did carry genes encoding ESBLs of all types TEM, SHV and CTX-M. The multiplex polymerase chain reaction (PCR) analysis was better to detect and differentiate ESBL producing K. penumoniae strains in clinical isolates.