• Journal of Microbiology
• /
• v.45 no.5
• /
• pp.460-465
• /
• 2007

This study was carried out in order to investigate the potential of using plant oils derived from Leptospermum petersonii Bailey and Syzygium aromaticum L. Merr. Et Perry as natural antifungal agents. The antifungal effects of essential oils at concentrations of 0.05, 0.1, 0.15, and 0.2 mg/ml on the dermatophytes Microsporum canis (KCTC 6591), Trichophyton mentagrophytes (KCTC 6077), Trichophyton rubrum (KCCM 60443), Epidermophyton floccosum (KCCM 11667), and Microsporum gypseum were evaluated using the agar diffusion method. The major constituents of the active fraction against the dermatophytes were identified by gas chromatography-mass spectrometry and high-performance liquid chromatography analysis. The antifungal activities of S. aromaticum oil (clove oil) against the dermatophytes tested were highest at a concentration of 0.2mg/ml, with an effectiveness of more than 60%. Hyphal growth was completely inhibited in T. mentagrophytes, T. rubrum, and M. gypseum by treatment with clove oil at a concentration of 0.2 mg/ml. Eugenol was the most effective antifungal constituent of clove oil against the dermatophytes T. mentagrophytes and M. canis. Morphological changes in the hyphae of T. mentagrophytes, such as damage to the cell wall and cell membrane and the expansion of the endoplasmic reticulum, after treatment with 0.11 mg/ml eugenol were observed by transmission electron microscopy (TEM). At a concentration of 0.2 mg/ml, L. petersonii oil (LPO) was more than 90% effective against all of the dermatophytes tested, with the exception of T. rubrum. Geranial was determined to be the most active antifungal constituent of L. petersonii oil. Taken together, the results of this study demonstrate that clove and tea tree oils exhibited significant antifungal activities against the dermatophytes tested in this study.

• Membrane Journal
• /
• v.20 no.4
• /
• pp.278-289
• /
• 2010

A series of composite membranes based on sulfonated poly(arylene ether sulfone) (SPAES) were prepared via addition of tetraethyl orthosilicate (TEOS) and solution casting method. The morphological structure, water uptake, proton conductivity of the resulting composite membranes were extensively investigated as function of the content of TEOS. By the sol-gel reaction, TEOS molecules were not completely converted to $SiO_2$ particles, but formed only oligomer-type. Also, EDS confirms that the resulting silicon dioxide was homogeneously distributed in the composite membranes. As the content of TEOS increased, the prepared membranes increased water uptake and proton conductivity at high temperature and low relative humidity condition. In particular, considerably high proton conductivity (0.015 S/cm) at $120^{\circ}C$ and 48%RH was demonstrated in the composite membrane containing 200% TEOS, which is 10 times greater than that of unmodified SPAES membrane. Also, the composite membranes were found to have enhanced thermal stability compared to the unmodified membrane.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.3 s.45
• /
• pp.195-204
• /
• 2005

Interlayered structures of talc and chlorite in the talc deposits of the Yugu area are studied using transmission electron microscope. Packets of chlorite-like layer in talcs or packets of talc-like layer in chlorites are commonly observed. Randomly interlayered features of talc and chlorite are locally observed in some specimens. Reactions observed in the present study include the addition or removal of a brucite-like layer in the interlayer region of the talc or chlorite resulting in the , transformation between a talc and a chlorite layers and breakdown or formation of a talc-like layer resulting in transformation between two talc layer and one chlorite layer. Both reactions are accompanied by a significant change in volume. In addition to these mechanisms, there are two volume conserving mechanisms; the combination of both mechanisms and mutual transformation in a complex manner. Reactions from 2 chlorite layers to 3 talc layers, from 2 chlorite layers + 1 talc layers to 1 chlorite layers + 3 talc layers, and from 3 chlorite layers to 5 talc layers are observed among the complex type mechanisms.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.771-776
• /
• 2005

In recent days, there is much interest in the biocidal activity of silver since silver is known to be safe and effective as disinfectant and biocidal material against coliforms and viruses. In particular, nano silted silver particles which can be used as effective biocidal material received more attention. Accordingly, it is important to investigate antimicrobial activity and mechanism of nano sized silver particles prepared in a cost-effective manner. In this study, nano sized silver particles were prepared via photoreduction of a silver salt ($AgNO_3$) in the bulk phase of $PEO_{20}-PPO_{70}-PEO_{20}$ (Pluronic 123) block copolymer The antimicrobial efficacy of silver nano particles against E. coli was investigated and compared with that of silver ion as the concentration of silver nano particles, pH ($5.6{\sim}8.2$), temperature ($4^{\circ}C{\sim}35^{\circ}C$) varied in aqueous system. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) was used to examine the nature of damaged microorganism with nano sized silver particles and silver ion. This study showed that antimicrobial efficacy of silver nano particles was approximately one twentieth than that of silver ion. It was more biocidal at higher pH in contrast with silver ion. In addition, nano silver particles was demonstrated to disrupt the outer membrane of E. coli, subsequently causing their aggregation. On the other hand, silver ion diffused into the cell damaging the cytoplasmic membrane without disrupting the outer membrane of E. coli.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.3
• /
• pp.361-366
• /
• 1997

To determine the physiological, biochemical characteristics and toxicity of hemolysin produced by a novel sucrose positive Vibrio (Vibrio sp. D5) isolated from estuary of Kum river, it was compared with already known sucrose positive Vibrio. Salinity, pH, temperature and conductivity of place where Vibrio sp. D5 was isolated were $4.7\%_{\circ},\;7.6,\;24^{\circ}C$ and $7800{\mu}MHOS$, respectively. Physiological and biochemical characteristics distingiushed Vibrio sp. D5 from other sucrose positive Vibrio: V. alginoipicus, V. cholerae, V. cincinnatiensis, V. fluvialis, V. furnissii and V. metschnikovii. The range of salinity and pH for growth of Vibrio sp. D5 were $0.5\%\~7.5\%$ and $4.5\~9.5$, respectively. Vibrio sp. D5 exhibited typical yellow colony on TCBS agar plate and curved rod type upon transmission electron microscopy (TEM). Vibrio sp. D5 had lethal toxicity against mouse in case of intraperitoneal injection with its culture and showed hemolysin activity on human blood agar and sheep blood agar. Ubrio sp. D5 also demonstrated vascular permeability activity toward rat. From the above results, Vibrio sp. D5 was ascertained to be a novel pathogenic Vibrio.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.3
• /
• pp.122-129
• /
• 2017

For the production of a high-density ITO target, $In_2O_3$ powders with a small particle size and low agglomeration should be synthesized. The purpose of this study is to control the size and shape of the Indium hydroxide precursor which affects the properties of the $In_2O_3$ powder. As a starting raw material, Indium metal was dissolved in a Nitric acid ($HNO_3$) solution. The effect of concentration, pH, and temperature on the properties of Indium hydroxide was investigated using ammonium hydroxide as a precipitant. Crystallite size of each sample was analyzed by X-ray diffraction and the shape and the size of the powder was analyzed by transmission electron microscopy. As a result, the particle size of Indium hydroxide was increased with increase in the concentration of $In(NO_3)_3$ and the particle size and shape of the Indium hydroxide remained unchanged with increase in the pH of the solution. The particle size increased with increase in the precipitation temperature during precipitation.

• The Korean Journal of Ecology
• /
• v.22 no.1
• /
• pp.39-43
• /
• 1999

Serratia marcescens, an enterobacterium of gram-negative bacteria, is characterized by resistance of the admium. Cadmium sensitive PM strain did not grow in the medium at cadmium concentration of 50 ppm. PA strain was induced to accommodate to cadmium by cultivating the mother strain (PC strain) in the medium with 50 ppm cadmium. As compared with PC and PM strains, PA strain revealed the excellent growth in cadmium media and accumulated four to five times higher cadmium concentration in cell than other strains. PA strain accumulated 23% of cadmium in cells when cultured in medium treated with 100 ppm cadmium and this cadmium was more accumulated in cytosol fractions than membrane fractions. Analysis by TEM indicated that cadmium was concentrated as a form of granule in cytosol. In protein patterns of cell after the treatment of cadmium, two inducible proteins (28 KDa and 64 KDa) and one reducible protein (45 KDa) were detected by SDS-PAGE. By Atomic Absorption Spectrophotometer, the amounts of cadmium attached to inducible proteins of 28 KDa and 64 KDa were 318.28 ㎍ and 325.37 ㎍ per gram of protein, respectively. It is assumed that these inducible proteins play an important role in the mechanism of cadmium accumulation in cells. A plasmid of 23Kbp was found in S. marcescens. The ability of resistance to cadmium in plasmid was confirmed by curing experiments.

• Journal of Electrochemical Science and Technology
• /
• v.1 no.1
• /
• pp.19-24
• /
• 2010

Alloying degree is an important structural factor of PtRu catalysts for direct methanol fuel cells (DMFC). In this work, carbon supported PtRu catalysts were synthesized by reduction method using anhydrous ethanol as a solvent and $NaBH_4$ as a reducing agent. Using anhydrous ethanol as a solvent resulted in high alloying degree and good dispersion. The morphological structure and crystallanity of synthesized catalysts were characterized by X-ray diffraction (XRD), high resolution transmission electron microscope (HR-TEM). CO stripping and methanol oxidation reaction were measured. Due to high alloying degree catalyst prepared in anhydrous ethanol, exhibited low onset potential for methanol oxidation and negative peak shift of CO oxidation than commercial sample. Consequently, samples, applying ethanol as a solvent, exhibited not only enhanced CO oxidation, but also increased methanol oxidation reaction (MOR) activity compared with commercial PtRu/C (40 wt%, E-tek) and 40 wt% PtRu/C prepared in water solution.

• Journal of the Korean Ceramic Society
• /
• v.36 no.4
• /
• pp.343-353
• /
• 1999

Microwave(2.45 GHz) was used as energy source in hydrothermal reaction to fabricate ultrafine BaTiO3 powder. Using microwave of 700 W, crytal BaTiO3 began to fom after 5 min in microwave-autoclave sys-tem. The crystallinity was not noticeably increased with increasing longer reaction time than 10 min. On the other hand in microwave-reflux system crytal BaTiO3 began to form after 15min and the crystallinity was not noticeably increased with increasing longer reaction time than 1hr,. In either case particle size dis-tribution was considerably uniform due to the effect of homogeneous heating by microwave. In addition mi-crowave heating gave an extremely small degree of particle agglomeration compared to electric heating. Av-erage sizes of as-synthesized powders were 30-60nm. Ba/Ti ratio in sol played an important role in det-ermining the particle size. It seems that excess barium forms different phases such as Ba(OH)2 which makes thin layer on the surface of BaTiO3 powder. This thin layer would inhibit the agglomeration of Ba-TiO3 powders and keep the small grain size. In microwave-autoclave system tetragonal-BaTiO3 was formed directly by the reaction of only 15 min. In the case of microwave-reflux system tetragonal-BaTiO3 was formed by driyng over 25$0^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.510-517
• /
• 2013

In this study, the properties of blue inorganic nano-pigments with a spinel structure were systematically investigated. We report the preparation of a blue ceramic nano-pigment and the Co and Ni substitutional effects on the blue color. $MgAl_2O_4$ was selected as the crystalline host network for the synthesis of cobalt and nickel-based blue ceramic nano-pigments. Various compositions of $Co_xMg_{1-x}Al_2O_4$ and $Ni_xMg_{1-x}Al_2O_4$ ($0{\leq}x{\leq}1$) powders were prepared using apolymerized complex method. The obtained powder was preheated at $400^{\circ}C$ for 5 h and then calcined at $1000^{\circ}C$ for 5 h. XRD patterns of the (Co,Mg)$Al_2O_4$ and (Ni,Mg)$Al_2O_4$ samples showed a single phase of the spinel structure in all compositions. TEM results indicated nano-sized pigments for (Co,Mg)$Al_2O_4$ and (Ni,Mg)$Al_2O_4$ with a particle size ranging from 20 to 50 nm. The characteristics of the color tones of (Co,Mg)$Al_2O_4$ and (Ni,Mg)$Al_2O_4$ were analyzed by CIE $L^*a^*b^*$ measurements. In addition, the thermal stability and the binding characteristics of (Co,Mg)$Al_2O_4$, (Ni,Mg)$Al_2O_4$ are discussed in terms of the TG-DSC and FT-IR results, respectively.