• Journal of Korean Society of Steel Construction
• /
• v.14 no.3
• /
• pp.463-470
• /
• 2002

The TEC-Beam system is a composite beam consisting of structural tee, precast concrete, and cast-in-site reinforced concrete slab. The preliminary test of the proposed system was performed for simple beams, showing good behavior. However, for the field application of the system. TEC-Beam - RC column connection was required to produce a mechanism that transfers the force occurring in the lower part of the TEC-Beam. Thus, this study developed a connection mechanism that transfers the force occurring in the lower part of the TEC-Beam. Thus, this study developed a connection wherein the section of the TEC-Beam was enlarged and the lower part reinforced. Two setups of the proposed system were experimentally investigated. using the anchorage length of reinforcement., i.e., length of the increased section, as test parameter. It could be concluded from the result that the proposed system shows good structural behavior, with potential applicability in the field.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.125.2-125.2
• /
• 2012

최근 아태지역 국제민간항공기구는 GPS의 항공이행을 위한 전리층 연구 태스크포스(Ionospheric Study Task Force, ISTF)를 결성하였다. 안전한 GPS 항공이행을 위해서는 지역적 그리고 전지구적 전리층 특성을 파악한 후 이를 기반으로 실시간 전리층 모델이 필요하다. 한국천문연구원은 ISTF의 전리층 변화 특성 분석에 관한 기술분과를 담당하고 있으며 GPS 항공이행 실시간 전리층 모델개발을 위한 아태지역 전리층 분석방법 및 표준규범을 수립하고 있다. 아태지역 전리층 연구에 앞서 우리나라 전리층 특성을 파악하고자 한국천문연구원이 1998년부터 운영 중에 있는 대전 국제 GPS 기준점으로부터 관측된 자료를 이용하여 태양 11년 주기에 해당하는 GPS TEC를 분석하였다. 또한, 해당 기간 동안 우리나라 양/음 전리층 폭풍 발생 빈도에 관한 통계분석을 실시하였다. 본 발표에서는 GPS TEC의 태양 극자외선 플럭스와 10.7 cm 태양전파와의 상관관계 차이점, 연변화 및 계절적 변화 그리고 이에 대한 시간 변화에 대해 보고한다. 또한 GPS TEC의 27일 주기 변화에 특성에 대해 토의하며, 우리나라 상공 전리층 폭풍의 계절적 분포에 대해 논의할 것이다. 끝으로 최근 한국천문연구원 GPS TEC 상시 관측자료에 나타난 태양 및 지자기 폭풍에 따른 전리층 폭풍 사례에 대해 고찰하고 이를 바탕으로 고층대기 연구가 GPS로 대표되는 현업에 적용되는 최근 현황을 소개할 것이다.

• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.47-54
• /
• 2018

Sediment disaster happen frequently in our country every year, and a lot of lives and the properties have been lost because of them. Non-structural measures for prevention of sediment disaster have been introduced by prefectures based on the Sediment-related Disaster Prevention Law established after the devastating rainstorm damage in Hiroshima in 1999. They include formulation of sediment disaster warning and evacuation standard rainfall and designation of sediment disaster warning zones and sediment disaster special warning zones. As a practical example, this research focused on the case of "TEC-FORCE" of "MLIT of Japan" as a method of utilizing professional workforce and the sediment disaster warning information delivery system in Kagoshima. In the future, it will be called for prevention and reduction of damages by utilizing professional workforce and sediment disaster response system such as Japan.

• Structural Engineering and Mechanics
• /
• v.27 no.2
• /
• pp.117-134
• /
• 2007

The force (load) reduction factor, R, which is one of the most important parameters in earthquake load calculation, is independent of the dimensions of the structure but is defined on the basis of the load bearing system of the structure as defined in earthquake codes. Significant damages and failures were experienced on prefabricated reinforced concrete structures during the last three major earthquakes in Turkey (Adana 1998, Kocaeli 1999, Duzce 1999) and the experts are still discussing the main reasons of those failures. Most of them agreed that they resulted mainly from the earthquake force reduction factor, R that is incorrectly selected during design processes, in addition to all other detailing errors. Thus this wide spread damages caused by the earthquake to prefabricated structures aroused suspicion about the correctness of the R coefficient recommended in the current Turkish Earthquake Codes (TEC - 98). In this study, an attempt was made for an approximate determination of R coefficient for widely utilized prefabricated structure types (single-floor single-span) with variable dimensions. According to the selecting variable dimensions, 140 sample frames were computed using pushover analysis. The force reduction factor R was calculated by load-displacement curves obtained pushover analysis for each frame. Then, formulated artificial neural network method was trained by using 107 of the 140 sample frames. For the training various algorithms were used. The method was applied and used for the prediction of the R rest 33 frames with about 92% accuracy. The paper also aims at proposing the authorities to change the R coefficient values predicted in TEC - 98 for prefabricated concrete structures.

• The Journal of Information Technology
• /
• v.8 no.1
• /
• pp.11-25
• /
• 2005

The purposes of this study were to explain consumer attitude, expenses and satisfaction of mobile-phone Users. The data of this study used from Pollever.com. This study was satisfaction of mobile-phone users in Korea. The users were consumers of Samsung, LG, SK-Telecom and Pantack. The critical success factor was on the subside for mobile-phone in the growth of mobile service, which we can analyze in its positive effects. Fifty percent of consumers were unsatisfaction with local companies without Samsung. Now most of local mobile-companies will developed music-phone, high-tec camera-phone, hi-slim phone, and health-phone. But, the results of this study are as fallow: Most of consumer' main issues were design, weight, and brand power. It was in that it played the driving force to upgrade the local mobile-phone services into international level with the explosive growth in business by providing cheap phones.

• Journal of the Korean Institute of Gas
• /
• v.25 no.5
• /
• pp.37-51
• /
• 2021

The pressure drop phenomenon that occurs when the same flow rate is supplied to the gas regulator was analyzed. The regulator moves the position of the piston through the interaction of the force acting on the upper and lower parts of the piston and the spring tension to release the pressure of a specific range in a specific environment as constant pressure, thereby maintaining the pressure. The flow characteristics and pressure control process of the regulator were investigated through a numerical analysis technique as the volume of the fluid inside the regulator changed. As the gap between the piston and the piston seat decreased, the pressure drop increased and the flow velocity increased. It was verified through numerical analysis that the piston was positioned at 0.12mm under the same conditions as the pressure-flow test (inlet pressure 3MPa, outlet pressure 0.8MPa, flow rate 70kg/h).

• Journal of Drive and Control
• /
• v.11 no.4
• /
• pp.46-52
• /
• 2014

This study suggests a small-sized screw decanter specialized for dredging sites. Generally, conventional screw decanters are composed of a cylinder and a cone. However, the suggested screw decanter simply has a cone based on a cone-type bowl structure. In this research, a commercial analysis tool is used to establish an optimal design for the bowl and the screw conveyor. Moreover, the base frame, where the main bearings that support the spindle of the bowl and the screw conveyor are installed, is optimally designed considering the weight of the rotating body and the deflection caused by the high centrifugal force. Furthermore, the natural frequency range of the spinning body, the bowl and the screw conveyor, is applied to this base frame; it is designed not to correspond to the resonance frequency range and achieves stability as a result. This study suggests an optimal design for the rotating body and the base frame of a screw decanter considering its vibration characteristics. Such a design will prevent overuse of materials and help to reduce the weight and volume-and the price-of a screw decanter.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2105-2112
• /
• 2013

In this paper we implemented a web-based performance monitoring system for web mail server. For this system we derived performance monitoring items and fixed its threshold values for each measuring items. We used the SCOM 2007 server monitoring tool for collecting the performance data of web mail server and Exchange server management pack and server monitoring rules of SCOM 2007 to set the performance analysis parameters. We implemented this performance monitoring system using C# programming based on the ASP.NET framework. This system supports web-based performance report, failure report and resource availability report from the performance analysis results. Therefore the manager can easily detect the failures of web mail server in advance and decrease the number of failure over 60%. Also this system helps manager to minimize the recovery time when the failure occurs.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.260-270
• /
• 2017

Zirconia has white color and physical, chemical stability, also using in high temperature materials and various industrial structural ceramics such as heat insulating materials and refractories due to their low thermal conductivity, excellent strength, toughness, and corrosion resistance. If hydrophobically modified zirconia is introduced into a hydrophobic acrylate coating solution, the hardness, chemical, electrical, and optical properties will be improved due to the better dispersibility of inorganic particle in organic coating media. Thus, we introduced $-CH_3$ group through silylation reaction using either trimethylchlorosilane(TMCS) or hexamethyldisilazane(HMDZ) on zirconia surface. The $Si-CH_3$ peaks derived from TMCS and HMDZ on hydrophobically modified zirconia surface was confirmed by FT-IR ATR spectroscopy, and introduction of silicon was confirmed by FE-SEM/EDS and ICP-AES. In addition, the sedimentation rate result in acrylate monomer of the modified zirconia showed the improved dispersibility. Comparison of the sizes of a pristine and the modified zirconia particles, which were clearly measured not by the normal microscope but by particle size analysis, provided a pulverizing was occurred by physical force during the silylation process. From the BET analysis data, the specific surface area of zirconia was approximately $18m^2/g$ and did not significantly change during modification process.