• Korean Journal of Applied Biomechanics
• /
• v.29 no.3
• /
• pp.197-204
• /
• 2019

Objective: The purpose of this study was to identify the effect of high-heels (HH) modification on metatarsal stress in female workers. Method: Seven females who work in clothing stores ($heights=160.4{\pm}3.9cm$; $weights=47.4{\pm}4.1kg$; $age=31.3{\pm}11.1yrs$; $HH\;wear\;career=8{\pm}6.5yrs$) wore two types of HH (original and modified). The modified HH had been grooved with 1.5 cm radius and 0.2 cm depth around the first metatarsal area inside of the shoes using the modified shoe-last. Participants were asked to walk for 15 minutes on a treadmill and to stand for 10 minutes with original and modified HH, respectively. Kinetics data were collected by the F-scan in-shoe system. After each test, participants were asked to rate their perceived exertion using the Borg's 15-grade RPE scale and interviewed about their feeling of HH. Nonparametric Wilcoxon signed-rank test and effect size (Cohen's d) were used to determine the difference of the variables of interest between the original and modified HH. Results: In the present study, modified HH of the peak contact pressure of 1st metatarsal (PCP) left, PCP right, pressure time integral (PTI) left, peak pressure gradient (PPG) left during standing and PPG right during walking are greater than original HH. And even it didn't show statistically significant, the average in all pressure values of modified HH showed bigger than original HH. It surmised to be related to awkward with modified HH. Even though they said to feel the comfortable cause of big space inside of HH in the interview, they seemed to be not enough time to adapt with new HH. So their walking and standing postures were unstable. Conclusion: Modified the fore-medial part of HH can reduce the stress in the first metatarsal head and big toe area during standing and walking.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.1
• /
• pp.61-69
• /
• 2019

All the parts of lotus, including the seed, rhizome, leaf, stalk, petal, anther, pericarp, and fruit receptacle, have been used in traditional medicine system as a health beneficial supplement. However the most usually used from lotus plant is only the root. Therefore in this study, it will be discussed more the utilization of other parts of the lotus, namely the flower of lotus. The petals and stamens of lotus actually are also rich in bioactive components such as flavonoids and alkaloids, are used in the treatment of tissue inflammation, cancer, skin disease, and also for us as antidotes. One of the biotechnological process that can be used to improve the nutritional content, sensory, and also antioxidant activities is fermentation process. The final product desired from the fermentation process in this study is vinegar. The microbial strain powder used is Uinkin fermented powder with three variations of fermentation. The variations given in this study were initial sugar 32%, 24%, and 14% with the same fermentation temperature, $35^{\circ}C$ for 3 months. The results obtained showed that the pH value and sugar content of products during the fermentation process were decreasing during the fermentation process, with total polyphenol content of $283.7{\pm}97.6mg/100g\;QAE$, and total flavonoid content of $3.3{\pm}0.0mg/100g\;QAE$. For the DPPH radical scavenging ability of the fermentation product also increased in a concentration dependent manner, with ORAC activity of the product showed a high activity of $20.7{\pm}0.41{\mu}M$ TE. Therefore, fermentation process can be the one of method for improving the product. The efficiency of lotus flower vinegar fermentation can be reached with an initial sugar condition of 25% (sample B).

• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1393-1398
• /
• 2018

In conventional single-photon emission computed tomography (SPECT), only the photoelectric events in the detectors are used for image reconstruction. However, if the $^{131}I$ isotope, which emits high-energy radiations (364, 637, and 723 keV), is used in nuclear medicine, both photoelectric and Compton scattering events can be used for image reconstruction. The purpose of our work is to perform simulations for Compton SPECT by using the Geant4 application for tomographic emission (GATE). The performance of Compton SPECT is evaluated and compared with that of conventional SPECT. The Compton SPECT unit has an area of $12cm{\times}12cm$ with four gantry heads. Each head is composed of a 2-cm tungsten collimator and a $40{\times}40$ array of CdZnTe (CZT) crystals with a $3{\times}3mm^2$ area and a 6-mm thickness. Compton SPECT can use not only the photoelectric effect but also the Compton scattering effect for image reconstruction. The correct sequential order of the interactions used for image reconstruction is determined using the angular resolution measurement (ARM) method and the energies deposited in each detector. In all the results of simulations using spherical volume sources of various diameters, the reconstructed images of Compton SPECT show higher signal-to-noise ratios (SNRs) without degradation of the image resolution when compared to those of conventional SPECT because the effective count for image reconstruction is higher. For a Derenzo-like phantom, the reconstructed images for different modalities are compared by visual inspection and by using their projected histograms in the X-direction of the reconstructed images.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3440-3447
• /
• 2022

The accuracy of the photoatomic cross-section data is of great importance in the field of radiation protection, particularly in the characterization of radiation shielding materials. With the release of the latest and probably the most accurate photoatomic data library, EPDL2017, the need to re-evaluate all the existing and already established mass attenuation coefficients (MACs) of all radiation shielding materials arises. The MACs of several polymers, alloy-based, glasses, and building materials used in a nuclear medicine facility were investigated using the EPDL2017 library embedded in EpiXS software and were compared to MACs available in the literature. The relative differences between MAC_EpiXS and MACXCOM were negligible, ranging from 0.02% to 0.36% for most materials. However, for material like a glass comprising of elements Te and La evaluated near their corresponding K-edge energies, the relative differences in MACs increased up to 1.46%. On the other hand, a comparison with MACs calculated based on EPDL97 (a predecessor of EPDL2017) revealed as much as a 6.61% difference. Also, it would seem that the changes in MACs were more evident in the materials composed of high atomic number elements evaluated at x-ray energies compared to materials composed of low atomic number elements evaluated at gamma-ray energies.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.2000-2010
• /
• 2021

Mechanical moduli, such as Young's modulus (E), Bulks modulus (B), Shear modulus (S), longitudinal modulus (L), Poisson's ratio (σ) and micro Hardness (H) were theoretically calculated for (100-x)TeO₂+x MgO glasses, where x = 10, 20, 30, 40 and 45 mol%, based on the Makishima-Mackenzie model. The estimated results showed that the mechanical moduli and the microhardness of the glasses were improved with the increase of the MgO contents in the TM glasses, while Poisson's ratio decreased with the increase in MgO content. Moreover, the radiation shielding capacity was evaluated for the studied TM glasses. Thus, the linear attenuation coefficient (LAC), mass attenuation coefficient (MAC), transmission factor (TF) and half-value thickness (𝚫_0.5) were simulated for gamma photon energies between 0.344 and 1.406 MeV. The simulated results showed that glass TM10 with 10 mol % MgO possess the highest LAC and varied in the range between 0.259 and 0.711 cm^-1, while TM45 glass with 45 mol % MgO possess the lowest LAC and vary in the range between 0.223 and 0.587 cm^-1 at gamma photon energies between 0.344 and 1.406 MeV. Furthermore, the BXCOM program was applied to calculate the effective atomic number (Z_eff), equivalent atomic number (Z_eq) and buildup factors (EBF and EABF) of the glasses. The effective removal cross-section for the fast neutrons (ERCSFN, ∑_R) was also calculated theoretically. The received data depicts that the lowest ∑_R was achieved for TM10 glasses, where ∑_R = 0.0193 cm² g^-1, while TM45 possesses the highest ERCSFN where ∑_R = 0.0215 cm² g^-1.

• Analytical Science and Technology
• /
• v.35 no.2
• /
• pp.69-81
• /
• 2022

The method of measuring and classifying the energy category of neutrons directly using raw data acquired through a CZT detector is not satisfactory, in terms of accuracy and efficiency, because of its poor energy resolution and low measurement efficiency. Moreover, this method of measuring and analyzing the characteristics of low-energy or low-activity gamma-ray sources might be not accurate and efficient in the case of neutrons because of various factors, such as the noise of the CZT detector itself and the influence of environmental radiation. We have therefore developed an efficient method of analyzing radiation characteristics using a neutron and gamma-ray analysis algorithm for the rapid and clear identification of the type, energy, and radioactivity of gamma-ray sources as well as the detection and classification of the energy category (fast or thermal neutrons) of neutron sources, employing raw data acquired through a CZT detector. The neutron analysis algorithm is based on the fact that in the energy-spectrum channel of 558.6 keV emitted in the nuclear reaction ¹¹³Cd + ¹n → ¹¹⁴Cd + in the CZT detector, there is a notable difference in detection information between a CZT detector without a PE modulator and a CZT detector with a PE modulator, but there is no significant difference between the two detectors in other energy-spectrum channels. In addition, the gamma-ray analysis algorithm uses the difference in the detection information of the CZT detector between the unique characteristic energy-spectrum channel of a gamma-ray source and other channels. This efficient method of analyzing radiation characteristics is expected to be useful for the rapid radiation detection and accurate information collection on radiation sources, which are required to minimize radiation damage and manage accidents in national disaster situations, such as large-scale radioactivity leak accidents at nuclear power plants or nuclear material handling facilities.

• The Korea Journal of Herbology
• /
• v.32 no.5
• /
• pp.19-25
• /
• 2017

Objective : The Sinseon-yukza-hwan (SSY), a Korean medicinal formula which includes Radix Rehmanniae Preparata and other medicinal herbs, has long been used for treatment of alopecia and gray hair through oral administration. This study is designed to enhance the utilization of natural materials in hair and scalp-related cosmetics. Possibility of SSY as an antioxidant was examined from its 50% ethanol extract. Methods : The antioxidative capacities were evaluated by determining total phenolic and flavonoid contents, 1,1-diphenyl-2-picryl hydrazyl (DPPH), 2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), reducing power and hydroxyl radical scavenging activity. Results : Total polyphenol and flavonoid contents of SSY were 25.53 mg TE, tannic acid equivalent/g and 18.90 mg RE, rutin equivalent/g, respectively, which correlated strongly its antioxidative activity. The DPPH and ABTS free radical scavenging activities of SSY at $0.1mg/m{\ell}{\sim}5mg/ml$ were ranged from 20% to 85% and 10% to 58%, respectively. Also the hydroxyl radical scavenger activity and reducing power increased in SSY-treated group, which were significantly lower in SSY-compared to BHA-treated group. But the highest reducing power was shown as 79% from SSY-treated group, which was higher value than 65% from BHA-treatment. These results showed that SSY extract effectively inhibited the generation of free radicals in the all assay system with dose-dependent manners. Conclusions : Thus, the present study provide preclinical data to support the expanded application of SSY, which could be potential candidates for natural antioxidants.

• The Journal of Internal Korean Medicine
• /
• v.44 no.1
• /
• pp.1-11
• /
• 2023

Objective: There are currently no disease-modifying medications or definite long-term sustainable interventions for patients with Parkinson's disease (PD), indicating an unmet treatment need. Our goal was to create a long-term sustainable intervention for PD patients that can be used in Korean medicine clinics. Methods: The Meridian Activation Remedy System (MARS) was created to stimulate a patient's 12 meridians and sinew channels using a combination of acupoint stimulation and exercise. The acupoints and motions used in MARS were selected through literature studies and expert advice. The methodologies were refined using observational and case studies. With slow and fast movements, the MARS intervention was intended to activate both slow- and fast-twitch muscle fibers. Intradermal acupuncture and motion that shift the center of gravity were employed to enhance the patient's balance and proprioception. In addition, the intervention included alternating movement exercises to address the complex cognitive decline commonly occurring in PD patients. Results: The following acupoints were chosen for the MARS intervention: bilateral Hegu (LI4), Houxi (SI3), Waiguan (TE5), Neiguan (PC6), Zhongchong (PC9), Yuji (LU10), Zusanli (ST36), Yanglingquan (GB34), Taichong (LR3), Kunlun (BL60), and Taixi (KI3). We also developed actions that can stimulate the body's 12 meridians. Conclusion: We developed the MARS intervention, which combines acupuncture and exercise, to address the unmet therapeutic needs of PD patients. We hope that with additional research, the MARS intervention can be set as an effective therapeutic program for PD patients.

• Investigative Magnetic Resonance Imaging
• /
• v.16 no.1
• /
• pp.16-24
• /
• 2012

Purpose : The purpose of this study was to determine whether there is a significant correlation between vertebral marrow fat fraction measured using Dixon quantitative chemical shift MRI (QCSI) and BMD on dual-energy X-ray absorptiometry (DXA). Materials and Methods: This retrospective study included 68 healthy individuals [mean age, 50.7 years; range, 25-76; male/female (M/F) = 36/32] who underwent DXA of the L-spine and whole body MRI including QCSI of the L-spine and chemical shift MRI of the liver. The enrolled individuals were divided into subgroups according to sex and T-score [i.e., normal bone density (M/F=27/23) and osteopenia (M/F=9/9)]. Vertebral marrow (Dixon QCSI, TR/TE 10.2/4.8 ms) and hepatic fat fractions (chemical shift technique, TR/TE 110/4.9 and 2.2 ms) were calculated on MRI. We evaluated whether there were significant differences in age, body mass index (BMI), vertebral marrow fat fraction, or hepatic fat fraction among the subgroups. Whether or not the participant had reached menopause was also evaluated in females. The correlations among variables (i.e., age, BMI, vertebral marrow and hepatic fat fractions, BMD) were evaluated using Spearman's correlation method. Results: There were no significant differences in age, BMI, or vertebral marrow and hepatic fat fractions between the two male subgroups (normal bone density vs. osteopenia). In female subjects, mean age in the osteopenic subgroup was greater than that in the normal subgroup (p=0.01). Presence of menopause was more common in the osteopenic subgroup [77.8% (7/9)] than the normal subgroup [26.1% (6/23), p<0.05]. The other variables showed no significant difference between female subgroups. The only significant correlation with marrow fat fraction after partial correlation analysis was that with age in the female subjects (r=0.43, p<0.05). Conclusion: The vertebral marrow fat fraction calculated using the Dixon QCSI does not precisely reflect the mild decrease in BMD for either sex.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.11
• /
• pp.1785-1790
• /
• 2014

This study was carried out to compare the physicochemical characteristics and sensory qualities of Sikhye (Korean traditional rice beverage) prepared with foxtail millet, proso millet, and sorghum. The cultivated varieties were Setaria italica Beauv. cv. Samdamae (SDM) and Samdachal (SDC), Panicum miliaceum L. cv. Ibaekchal (IBC), Sorghum bicolor (L.) Moench cv. Nampungchal (NPC), Donganme (DAM), Oryza sativa cv. Ilpum (IP), and Baegokchal (BOC). The brix degrees of SDM, SDC, IBC, NPC, DAM, IP, and BOC Sikhye were 9.53, 8.63, 5.67, 7.57, 6.27, 12.50, and $12.27^{\circ}Bx$, respectively. There were no significant differences in pH (5.99~6.10) among the groups. The highest turbidity was 1.07 in DAM Sikhye. The L-value, a-value, and b-value were 30.85~41.11, -0.34~2.52, and 2.56~5.67, respectively. Total polyphenol contents of SDM, SDC, IBC, NPC, DAM, IP, and BOC Sikhye were 241.52, 213.69, 202.34, 258.25, 193.24, 160.81, and $170.31{\mu}g\;GAE/mL$, respectively. Total flavonoid contents of Sikhye were $19.21{\sim}54.30{\mu}g\;CE/mL$. The highest DPPH and ABTS radical scavenging activities were $16.85{\pm}0.39$ and $64.75{\pm}2.92mg\;TE/100mL$ in DAM Sikhye, respectively. Finally, the sensory evaluation results indicate that there were significant differences in appearance, aroma, and taste between the groups, and SDM Sikhye was similar with IP and BOC.