• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.6
• /
• pp.36-43
• /
• 2000

Three-Dimensional FDTD method is applied to analyze the dielectric resonator coupled with two microstrip lines. We model accurately the curved surface using Noriaki model. The frequency resolution is 106.46 MHz by the conventional FFT However it is not sufficient for determining its resonant frequency. So we introduce the Pad approximation and Stoer-Bulirsch method in order to have the high frequency resolution degree, 1.00 MHz. All results are compared with the measured data. As a result, we acquire the very precise result through the Pad approximation. And sinusoidal wave is applied. From the plot of the electric and magnetic field distribution, it is shown that the resonant mode is TE$_{01{\delta}}$ mode.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.173-178
• /
• 2000

A prototype for a highly sensitive, automated measurement system for the microwave surface resistance of high-T$_c$ superconductor films was set up, and tested by measuring the microwave surface resistances of high-T$_c$ YBa$_2$Cu$_3$O$_{7-{\delta}}$(YBCO) films at the frequency of about 19.6 GHz and the temperature of 30 K ${\sim}$ 90 K. An open-ended TE$_{011}$ mode sapphire-loaded cylindrical cavity resonator was used as the measurement probe, where YBCO films were used as the endplates of the cylindrical cavity. The characteristics of the measurement system include functions to display the unloaded ${\varrho}$ and the resonant frequency of the TE$_{011}$ mode resonator as well as the microwave surface resistance of the YBCO films, all simultaneously as a function of temperature. Applicability of the measurement system for investigating the homogeneity in the microwave properties of large high-T$_c$ superconductor films is discussed.

• Progress in Superconductivity
• /
• v.2 no.1
• /
• pp.27-32
• /
• 2000

A prototype for a highly sensitive, automated measurement system for the microwave surface resistance of high-$T_c$ superconductor films was set up, and tested by measuring the microwave surface resistances of high-$T_c$ $YBa_2Cu_3O_{7-\delta}$ (YBCO) films at the frequency of about 19.6 GHz and the temperature of 30 K $\sim$ 90 K. An open-ended $TE_{011}$ mode sapphire-loaded cylindrical cavity resonator was used as the measurement probe, where YBCO films were used as the endplates of the cylindrical cavity. The characteristics of the measurement system include functions to display the unloaded Q and the resonant frequency of the $TE_{011}$ mode resonator as well as the microwave surface resistance of the YBCO films, all simultaneously as a function of temperature. Applicability of the measurement system for investigating the homogeneity in the microwave properties of large high-$T_c$ superconductor films is discussed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.5
• /
• pp.488-491
• /
• 2005

A 3-year-old female, 5kg, Shih-tzu developed an acute onset of depression, disorientation, hypersalivation, nystagmus after falling down 2 meter height place. In plain skull radiography, there was fracture line in the frontal and parietal bones and next day magnetic resonance imaging examination was performed. Magnetic resonance imaging of the brain was performed with 3.0 Tesla unit. Under general anesthesia, the dog was placed in prone with its head positioned in a birdcage coil. Transverse, sagittal and coronal fast spin echo images of the brain were obtained with the following pulse sequences: T1 weighted images (TR = 560 ms and TE = 18.6 ms) and T2 weighted images (TR = 3500 ms and TE = 80 ms). Magnetic resonance imaging showed epidural hematoma in the left frontal area resulting in compression of the adjacent brain parenchyma. Left lateral ventricle was compressed secondarily and the longitudinal fissure shifted to the right, representing mass effect. The lesion was iso-to slightly hyperintense on T1 weighted image and iso-slightly hypointense signal on T2 weighted image. At necropsy, there was a skull fracture and epidural hematoma in the left frontal area. Magnetic resonance imaging of epidural hematoma is reviewed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.674-681
• /
• 2000

We proposed polymer based vertical asymmetric optical coupler. And we optimized the proposed device by coupling characteristic analysis In 1.33um wavelength, TE mode, we obtained very short coupling length(L=277.6um), high coupling efficiency(94%). The merits of proposed device are low propagation loss due to very short full device, low production cost and time, and high integrated fabrication. We will use this to fabricate optical switch, modulator and tunable WDM devices, etc.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.241-241
• /
• 2010

적외선 센서는 빛의 유무에 관계없이 물체 또는 인체에서 발산하는 적외선을 감지한다. 이러한 센서를 전자 및 디스플레이 시스템과 연동하면 열영상 시스템이 되는데, 이는 전방 감시, 플랜트 감시, 보안, 방범용으로 많이 사용되며, 특히 자동차 야간 운전자 보조용으로 사용되어 최첨단, 고부가가치를 지니고 있는 핵심부품이다. 비냉각형 적외선 센서인 마이크로볼로미터는 상온에서 작동하므로 극저온 Cooler가 불필요하며, 무게와 부피가 작아 각종 시스템에 부착가능하다. 특히 볼로미터형 적외선 센서는 용량이 적은 TE cooler로 상온으로 안정화를 시키며, 진공으로 유지되는 금속 또는 세라믹 패키지를 사용하게 된다. 본 연구에서는 마이크로 볼로미터용 진공패키지를 제작하여 패키지 조립 및 측정기술에 대해 조사하였다. 패키지는 금속재질인 kovar를 사용하여 제작되었고, 내부에 TE Cooler와 장수명 진공유지를 위한 getter, 그리고 온도센서 및 볼로미터 센서 칩을 장착하여 조립하였다. 패키지 Cap ass'y와 base envelop의 솔더링 공정은 약 $200^{\circ}C$에서 수행하였으며, evacuation system을 이용하여 5일 동안 패키지 bake-out 공정을 수행하였다. 이 후 getter를 활성화시키고, seal-off 공정으로 진공 기밀을 유지하였다. 진공 패키지의 기밀성은 $6{\times}10^{-9}\;std.cm^3/sec$로 기밀성을 유지하였다. 볼로미터 센서의 반응도는 $10^2\;V/W$ 이상을 나타내었으며, 탐지도는 $2{\times}10^8\;cm-Hz^{1/2}/W$를 나타내었다.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.2
• /
• pp.284-290
• /
• 2012

물(water, TW), 에탄올(ethanol, TE) 및 핵산(n-hexane, TH)을 이용하여 탱자씨 추출물(trifoliate orange seed extracts, TSEs)을 각각 제조한 후 그람양성 식중독균 6종(Bacillus cereus KCCM 11341, Bacillus subtilis KCTC 1022, Listeria monocytogenes ATCC 12692, Staphylococcus aureus ATCC 19111, Streptococcus mutans KCTC 3065 및 Yersinia enterocolitica KCCM 41657)에 대한 항균활성과 Lactobacillus acidophilus IFO 3025에 대한 프레바이오틱 효과(prebiotic effect)를 측정하였다. 그 결과, 탱자씨 핵산추출물(TH)은 S. aureus ATCC 19111에 대해 배양시간이 증가함에 따라 대조군에 비해 강한 증식저해활성을 보였으며, 탱자씨 에탄올 추출물(TE)은 약간의 증식저해활성을 보였다. 특히, 배양 81시간 후 대조군은 90.31%의 증식활성을 보인 것에 반해 탱자씨 핵산추출물과 에탄올추출물은 64.95%와 75.50%의 증식활성을 각각 보였다. 탱자씨 추출물의 Lb. acidophilus IFO 3025에 대한 프레바이오틱 효과는 대조군에 비해 증식활성을 보이지는 않았으나, 적어도 생육저해효과를 보이지는 않았다. 따라서 탱자씨의 핵산 및 에탄올 추출물은 S. aureus ATCC 19111에 대한 항균활성물질로서의 가능성을 제시하였다.

• Journal of Aquaculture
• /
• v.16 no.1
• /
• pp.51-58
• /
• 2003

The first Indian transgenic fish was generated in 1991 using borrowed constructs from foreign sources. To construct transformation vectors for the indigenous fishes, growth hormone genes of rohu (r-CH), Labeo rohita and catfish, Heteropneustes fossilis were isolated, cloned and sequenced; their fidelity was confirmed in prokaryotic and eukaryotic systems. A vector was constructed with grass carp b-actin promoter driving the expression of r-GH. Rohu eggs are large. fragile and swell 2~3 times. when fertilized. Hence they were amenable only for electroporated sperm-mediated gene transfer. Accordingly, the sperm electroporation technique was standardized to ensure 25% hatchling survival and 37% Presumptive transgenics without suffering any deformity. Southern analysis confirmed genomic integration in 15% of the tested individuals (Ti) belonging to family lines 2 and 3: another 25% of the Juveniles (Te) were also proved transgenic but with the transgene persisting extrachromosomally for longer than 1 to 2 years. perhaps due to the presence of replicon in the vector. Transgenics belonging to different family lines grew 6~8 times faster than the respective controls. Difference in growth trends of Ti and Te within a family line was not significant. In the Ti family 3 remarkable growth acceleration was sustained for a period longer than 36 weeks but in those of family 2, it gradually decreased. All transgenic fishes including the rohu converted the food at a significantly higher efficiency. Barring the transgenic mudloach, all the other transgenic fishes consumed food at significantly reduced rate.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.4
• /
• pp.257-261
• /
• 2015

In this study, we fabricated a thermoelectric module made of nanoparticles (NPs) and glass fibers investigated its thermoelectric characteristics. P-type HgTe and n-type HgSe NPs synthesized by colloidal method were used as thermoelectric materials and glass fibers were used as spacers between the hot and cold electrodes of the thermoelectric module. In the module, the average Seebeck coefficients of the HgTe and HgSe NPs were 1260 and $-628{\mu}V/K$, respectively. The p-n module generated about a voltage of 11.9 mV and showed a power density of $1.6{\times}10^{-5}{\mu}W/cm^2$ at a temperature difference of 7.5 K.

• Nuclear Engineering and Technology
• /
• v.36 no.1
• /
• pp.36-46
• /
• 2004

The ISAAC fission product release calculation is based on detailed FPRAT models developed by Jaycor. For volatile fission product release calculations, either the Cubicciotti steam oxidation correlation or the NUREG-0772 correlation is used. In this study, evaluation is carried out for these volatile fission product release models. As a result, in the case of early release, the IDCOR model with an in-vessel Te release option shows the most conservative results and for the late release case, the NUREG-0772 model shows the most conservative results. Considering both early and late release, the IDCOR model with an in-vessel Te bound option is evaluated to show mitigated conservative results. In addition, a sensitivity study on detailed core nodalization is performed. In the study, 380 horizontal fuel channels in the Wolsong plant are nodalized into 12 (6 channels per loop, $3{\times}3$ Core Pass) representative channels and detailed by 16/20/24 channels. For reference accidents, LOAH and large LOCA are selected as representing high and low pressure sequences, respectively. According to the results, the original 12 channel approach with $3{\times}3$ core passes is evaluated to be sufficient as an optimal scheme.