• Journal of Satellite, Information and Communications
• /
• v.6 no.1
• /
• pp.86-96
• /
• 2011

In this paper we propose a Pre-rake system applied with a frequency domain equalizer in TDD/CDMA multi-code transmission. The Pre-rake system has been well known technique in TDD/CDMA to make a receiver simple. However, it still has residual losses of path diversity and signal to noise ratio (SNR). However, gathering all the residual paths demands an additional hardware such as a rake combiner at the receiver. For the reason Pre/Post-rake system has already been proposed at up/downlink correlated channel conditionunder the assumption of noisier channel. There is a trade-off between the first purpose of Pre-rake that makes hardware simple at the receiver and the performance improvement. From the point the frequency domain equalizer (FDE) can be considered in Pre/Post-rake to supply the receiver with the flexible equalizing methods with rather reduced complexity compared with time domain rake combiner or equalizers. Pre-rake itself increases the number of multipath, which results from the convolution of Pre-rake filter and wireless channel, and FDE must be well matched to Pre/Post-rake, while it considers the relationship of hardware complexity and the performance. In this paper, the Pre-rake/Post-FDE system is introduced at TDD/CDMA multi-code transmission. In addition, the cyclic prefix reduction method in the proposed system is introduced, and the theoretical analysis to the proposed system is given by assuming Gaussian approximation, and finally the numerical simulation results are provided.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.5
• /
• pp.445-453
• /
• 2016

This paper presents the implementation and design of the 1T-1R wireless HD video streaming systems over 28 GHz mmWave frequency using 3GPP LTE-TDD standard on NI USRP RIO SDR platform. The baseband of the system uses USRP RIO that are stored in Xilinx Kintex-7 chip to implement LTE-TDD transceiver modem, the signal that are transceived from USRP RIO up or down converts to 28 GHz by using self-designed 28 GHz RF transceiver modules and it is finally communicated HD video data through self-designed $4{\times}8$ sub array antennas. It is that communication method between USRP RIO and Host PC use PCI express ${\times}4$ to minimize delay of data to transmit and receive. The implemented system show high error vector magnitude performance above 25.85 dBc and to transceive HD video in experiment environment anywhere.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.971-982
• /
• 2008

In this paper, we propose a new digital duplexing scheme, called SDD(Synchronous Digital Duplexing), which can increase data efficiency and flexibility of resource by transmitting uplink signal and downlink signal simultaneously. In order to transmit uplink data and downlink data simultaneously, the proposed SDD obtains mutual informations between AP(access point) and each SSs(subscriber station), SS and other SSs by mutual ranging procedure. These informations are used for selection of transmission time, decision of CS insertion, setting of CS length, and FFT duration resetting, etc. It is shown that the proposed SDD is appropriate for duplexing scheme in indoor environments over the conventional TDD(Time Division Duplexing) and FDD(Frequency Division Duplexing).

• Information and Communications Magazine
• /
• v.31 no.8
• /
• pp.84-91
• /
• 2014

본고에서는 최근 학계 및 산업계에서 활발히 연구되고 있는 간섭정렬 기술동향에 대해 소개한다. 특히 Signal Space 간섭정렬, Signal Scale 간섭정렬, Ergodic 간섭정렬의 기본 개념과 장단점 및 응용분야를 정리하였다. 또한 셀룰라 무선망에서의 간섭정렬에 대해 소개한다. 크게 단일안테나 환경과 다중안테나 환경에서의 간섭정렬로 나뉠 수 있으며, 각각의 경우에 대해 기술동향 및 주요 연구결과를 정리하였다. 마지막으로 최근 Reverse TDD, 즉 상향링크와 하향링크가 공존하는 환경에서의 간섭정렬을 통해 다중안테나 셀룰라 무선망의 자유도를 획기적으로 개선 할 수 있는 연구결과를 소개한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.3
• /
• pp.537-542
• /
• 2017

In this paper, we propose a new scheduling scheme to reduce the complexity and overhead in TDD uplink cellular networks. In a TDD network, users can estimate the interference causing to neighboring BSs by measuring the signals transmitted from them. In the existing max SGIR scheduling scheme, each user calculates SGIR and feeds back to BS. Then, the BS selects a user having the largest SGIR value to transmit data. This scheme has a problem that as the number of BSs increases, the number of interference channels to be measured by the users increases, and thus the hardware and algorithm complexity of the user increases. We propose a max SmGIR (Signal-to-max generating interference ratio) scheduling scheme that can reduce the user complexity by predicting the SGIR value based on only the largest interference information. According to computer simulations, the proposed scheme has similar performance to the existing max SGIR scheme despite this low complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7C
• /
• pp.735-742
• /
• 2006

In this paper, we explain the operation scheme and fixed-point design method of DFE (Digital Front End), which performs DC offset compensation, automatic frequency control, and automatic gain control over the input signal to the UE (User Equipment) receiver of IEEE 802.16e OFDMA-TDD system. Then, we analyze the performance of DFE under ITU-R M. 1225 Veh-A 60km/h channel environment. To optimize the fixed-point design of DFE, we reduce the number of bit resulted from calculation without performance degradation, leading to the decreased complexity of the operation in H/W, and design the Loop filter with considering trade-off between the Acquisition time and the Stability.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.156-161
• /
• 2007

In a TDD system, the length of slots can be unequal, and the number of downlink (DL) and uplink (UL) slots per frame can be different as well. The advantage of using TDD is the capability to accommodate asymmetric high-bit-rate services for the DL and It, which will be one of the prominent features in 4G systems. This paper analyzes the performance of TDD system on mobile channel environments like indoor pedestrian and vehicular channel, and proposes optimum modulation/demodulation method in TDD system. A rectangular QAM (RQAM) used in various communication systems has good BER performance but the much more signal amplitudes also have become one of the barriers to implement receiver. While PSK receiver is implemented easily because it has a constant amplitude, but it's BER performance is worse than RQAM. APSK proposed in this paper integrates merits of RQAM and PSK, and minimizes demerits of then And a simple method is also proposed to demodulate the soft symbol. The results indicate that the proposed APSK has a little worse performance than RQAM but the dynamic range of APSK is about 4 dB, 8 dB better than RQAM at 16-ary, 64-ary modulation/demodulation respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6A
• /
• pp.593-602
• /
• 2006

This paper propose to methodology for deciding suitable bit size that minimizes hardware complexity and performance degradation from floating-point design the fixed-point implementation of downlink traffic channel of IEEE 802.16e OFDMA TDD system. One of the major considering issues for implementing fixed-point design is to select Saturation or Quantization properly with the knowledge of signal distribution by pdf or histogram. Also, through trial and error, we should execute exhaustive computer simulation for various bit sizes, hence obtain appropriate bit size while minimizing performance degradation. We carry out computer simulation to decide the optimized bit size of downlink traffic channel under AWGN and ITU-R M.1225 Veh-A channel model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2613-2620
• /
• 2014

In this paper, we consider a full duplexing (FD) wireless cellular network where a central base station (BS) works in the FD mode while the downlink (DL) and uplink (UL) users work in the time division duplexing (TDD) mode. Since this FD system induces the inter-user interference from UL user to DL user, the main challenge for maximizing the system performances is user scheduling that makes a pair of DL user and UL user to use the same radio resource simultaneously. We formulate an optimization problem for user pairing to maximize the cell capacity and propose a suboptimal user scheduling algorithm with low complexity. This scheduling algorithm is designed in a way where the DL user with a better signal quality has a higher priority to choose its UL user that causes less interference. Simulation results show that the FD system using the proposed user scheduling algorithm achieves the optimal performance and significantly outperforms the conventional TDD system in terms of the cell capacity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1172-1176
• /
• 2008

In this paper, we describe the implementation and performance of a dual-mode Software Define Radio (SDR) smart antenna base station system. SDR technology enables a communication system to be reconfigured through software downloads to the flexible hardware platform that is implemented using programmable devices such as Digital Signal Processors (DSPs), Field Programmable Gate Arrays (FPGAs), and microprocessors. The presented base station channel card comprises the physical layer (pHY) including the baseband modem as well as the beamforming module. This channel card is designed to support TDD High-Speed Downlink Packet Access (HSDPA) as well as Wireless Broadband Portable Internet (WiBro) utilizing the SDR technology. We first describe the operations and functions required in WiBro and TDD HSDPA. Then, we explain the channel card design procedure and hardware implementation. Finally, we evaluate WiBro and TDD HSDPA performance by simulation and actual channel-card-based processing. Our smart antenna base-station dual-mode channel card shows flexibility and tremendous performance gains in terms of communication capacity and cell coverage.