• Journal of information and communication convergence engineering
• /
• v.8 no.2
• /
• pp.234-237
• /
• 2010

P300 component of the event-related potential(ERP) has been studied for theoretical, empirical, and clinical applications. Nowadays the 1-, 2-, and 3-stimulus oddball paradigms are used for eliciting P300 component of EEG in the auditory stimulus experiments. In this paper, we used a method to add one more stimulus to the 3-stimulus auditory paradigm. The adding stimulus has not the same volume but the same tone of the target stimulus. The 4-stimulus oddball paradigm to use two targets is used to elicit the P300 event-related potentials. In 4-stimulus oddball paradigm, an infrequent non-target (p=0.10) is presented in addition to two infrequent targets (p=0.10) and a frequent standard (p=0.70). Two target stimuli elicited a P300 component with a parietal maximum distribution. The amplitude of the P300 in target 2 was larger than that in target 1 and the latency of the P300 in target 2 was longer than that in target 1. The P300 component due to target 2 stimuli was larger than that due to target 1 stimuli. The experimental results approve that the 4-stimulus oddball paradigm can elicit P300 component clearly. The results are compared with the results of the traditional oddball paradigm.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.9
• /
• pp.836-842
• /
• 2015

In this paper, the target size and model based target size estimator (TMBE) algorithm is presented for iimaging infrared (IIR) seeker. At the imaging seeker, target size information is important factor for accurate tracking. The model based target size estimator filter (MBEF) algorithm was proposed to estimate target size at imaging infrared seeker. But, the model based target size estimator filter algorithm need to know relative distance from the target. In order to overcome the problem, we propose target size and model based target size estimator filter (TMBEF) algorithm which based on the target size. The performance of proposed algorithm is tested at target intercept scenario. The experiment results show that the proposed algorithm has the accurate target size estimating performance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.183-183
• /
• 2011

리튬 이온 배터리의 cathode 및 electrolyte 재료로 사용되는 LiCoO2을 sputtering이나 pulsed laser deposition을 이용하여 박막으로 증착하기 위해서는 target이 필요하다. Target은 원료 분말을 가압 성형한 후 고온에서 소결하여 제조된다. LiCoO2 target 제조과정에서 고밀도를 얻기 힘들고 Li 성분의 증발이 일어난다. 또한 Li2O 분말은 흡습성이 매우 크다. 본 연구에서는 시간과 온도를 조절하여 최적화된 소결 과정을 통해 target의 밀도가 이론밀도와 근사한 값을 갖도록 하고, LiCoO2 또는 Co3O4 분말에 각각 흡습성이 낮은 Li2CO3 분말을 첨가하여 Li 성분을 조절하였다. Li과 Co의 조성비가 1:1-2:1인 고밀도의 LiCoO2 target을 제조하여 박막 증착 후 Li과 Co의 조성비가 1:1이 되도록 하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.8
• /
• pp.842-848
• /
• 2014

In this paper, an improved method RMBE (Resizable Model Based target size Estimator) is presented for SDIIR (Strap Down Imaging Infrared) seekers. At the target engaging scenario, the IIR target measurement is separated by various parts. In this case, target object changing is important to accurate target intercept. Therefore, we need robust target size estimator. Our proposed method resize estimated target size with MC-1 (Markov Chain I) for accurate target size estimation. The performance of proposed method is tested at IIR target tracking of target intercept scenario. The experiment results show that the proposed RMBE has improved performance than MBE.

• Journal of the Korean Ceramic Society
• /
• v.49 no.5
• /
• pp.448-453
• /
• 2012

Nitrogen-incorporated $SnO_2$ thin films were deposited by rf magnetron sputtering. Comparative structural, electrical and optical studies of thin films deposited by sputtering of the Sn metallic target and sputtering of the $SnO_2$ ceramic target were conducted. The $SnO_2$ thin films deposited by sputtering of the Sn metallic target had a higher electrical conductivity due to a higher carrier concentration than those by sputtering of the $SnO_2$ ceramic target. Structurally the $SnO_2$ thin films deposited by sputtering of the $SnO_2$ ceramic target had a better crystallinity and a larger grain size. This study confirmed that there were distinct and clear differences in electrical, structural, and optical characteristics between $SnO_2$ thin films deposited by reactive sputtering of the Sn metallic target and by direct sputtering of the $SnO_2$ ceramic target.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.7
• /
• pp.530-535
• /
• 2016

In this paper, the TTSE (Target size and Triangulation-based target Size Estimator) algorithm is proposed to estimate static target size in an imaging environment. The target size information is an important factor for accurate imaging target tracking. However, the imaging sensor cannot generate distance between the missile and target to calculate the target size. To overcome the problem, we propose the TTSE algorithm, which is based on target size and triangulation. The proposed method performance is tested in a target intercept scenario. The experiment results show that the proposed algorithm has better performance than the conventional algorithm (ET-TSE) for accurate CCD target size estimation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.1
• /
• pp.29-36
• /
• 2014

In this paper, a novel MBE (Model Based target size Estimator) is presented for SDIIR (Strap Down Imaging Infrared) seekers. The target tracking requires the target size information for which residual range between target and missile should be provided. Unfortunately, in general, the missile with passive sensor such as IIR (Imaging Infrared), CCD (Coupled Charging Device) cannot obtain range information. To overcome the problem, the proposed method enables the SDIIR seeker to estimates target size by using target size model and track the target. The performance of proposed method is tested at IIR target tracking of target intercept scenario. The experiment results show that the proposed algorithm has the relatively good performance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.9
• /
• pp.843-848
• /
• 2015

In this paper, The ARR-TSE (Automatic Range Restore - Triangulation based target Size Estimator) algorithm is presented for IIR (Imaging Infrared) seeker. The target size is important information for the IIR target tracking. The TSE (Triangulation based target Size Estimator) algorithm has suitable performance to estimate target size for static IIR target. but, the performance of the algorithm can be decreased by noise. In order to decrease influence of noise, we propose the ARR-TSE algorithm. The performance of proposed method is tested at target intercept scenario. The simulation results show that the proposed algorithm has the accurate target size estimating performance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.10
• /
• pp.917-923
• /
• 2015

In this paper, the TSE (Triangulation based target Size Estimator) algorithm is presented to estimate static target size at IIR (Imaging Infrared) environment. The size information is important factor for accurate IIR target tracking. But the IIR sensor can't generate distance between missile and target to calculate target size. In order to overcome the problem, we propose TSE algorithm which based on triangulation measurement. The performance of proposed method is tested at target intercept scenario. The experiment results show that the proposed algorithm has suitable performance for the accurate static target size estimating.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.255-259
• /
• 2004

본 논문에서는 다목적 위성 2호의 주 탑재체인 MSC (Multi-Spectral Camera)의 영상자료 검보정을 위한 검보정 target 준비 작업에 대해 설명한다. MSC 영상 자료에 대한 검보정 작업은 다목적 위성 2호의 발사 후 초기 운영 기간 (LEOP: Launch and Early Operation Phase)인 3개월 동안 수행될 예정이다. 위성 발사 전까지 MSC 영상 자료에 대한 검보정을 수행하기 위해 필요한 준비 작업들이 현재 한국항공우주연구원에서 진행중이다. LEOP 기간 동안 MSC 영상 자료를 검보정하기 위해서, MSC의 센서 특성에 따라 7가지 정도의 검보정 target에 대한 설계 초안이 완성되었으며, 향후 target에 대한 설계를 완성한 후에 2004년 중에 한 두 부지에 몇 가지 target들을 건설하고, 다목적 위성 2호의 궤도 특성을 고려하여 일부 target은 운반이 가능하도록 제작할 예정이다. 검보정 target이 촬영된 MSC 영상 자료의 분석을 통해, GSD (Ground Sample Distance), Aliasing, Linearity, Edge Slope & Response, MTF (Modulation Transfer Function), FOV & IFOV, Absolute radiometric validation, Position Accuracy 등의 MSC 검보정 요소 값들을 측정할 계획이다.