• Journal of the Korean Wood Science and Technology
• /
• v.38 no.1
• /
• pp.36-42
• /
• 2010

This study has been carried out to investigate the characteristics of pellets manufactured from sawdust, and a mixture of liquid wood-tar and sawdust. Pellets were prepared at room temperature under 2000 kgf/$cm^2$ using an universal testing machine. The pellets prepared from Q. variabilis wood had slightly higher density than those prepared from P. densiflora wood. The amount of fine particles from Q. variabilis wood pellets was smaller than those from P. densiflora wood. The pellets from P. densiflora wood had higher heating values than those from Q. variabilis wood. The wood pellets manufactured with wood tar showed higher moisture content, density and heating value, but lower fine particles. From the experimental results, it is suggested that wood tar can be used to obtain the higher quality wood pellets.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.117-117
• /
• 2016

Total ankle replacement (TAR) is a visible option in the surgical treatment of degenerative or inflammatory diseases of ankle joint. it is attributed to the current TAR which has improvements in surgical technique, uncemented implant fixation and minimally constrained articulation. In the clinical result, they can show promised surgical result when compared to earlier attempts in TAR. However, TAR is still not as successful as total knee replacement (TKR) or total hip replacement (THR), it needs to be note that there are limitations in concerning of long term performance of TAR, the high failure rate still associated with wear of the PE (polyethylene) component that has related with their material property and surface roughness. The aim of this study was to introduce the tribology characteristics of total ankle joint prosthesis with one of TDR model which was fabricated to try multi-axis wear test as a region of motion in ankle joint. The wear specimen of TDR was prepared with Ti-6Al-4V alloy and UHMWPE (ultra-high molecular weight polyethylene) for tibia-talus and bearing component, respectively. A wear test was carried out using a Force 5 (AMTI, Massachusetts, US) wear simulator which can be allowed to move in three axis to flexion-extension ($+3^{\circ}{\sim}-6^{\circ}$), internal-external axial rotation (${\pm}5^{\circ}$), as well as sinusoidal compressive load (1.6 kN, R=10). All tests were performed following standard ISO 14243, wear rate was calculated with weight loss of UHMWPE bearing while the specimen has tested at certain cycles. As based on the preliminary results, wear rate of UHMWPE bearing was $7.9{\times}10^{-6}mg/cycles$ ($R^2=0.86$), calculated loss weight until $10^7cycles$ was 79 mg, respectively.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.355-356
• /
• 2014

Catalytic steam reforming of tar produced from biomass gasification was conducted using several Ni-based catalysts. K and Mn were used as a promoter over $Ni/Ru/Al_2O_3$ catalyst. The pellet and monolith type catalysts were prepared and applied to lab and bench-scale biomass gasification system. The $Ni/Ru-K/Al_2O_3$ catalyst shown higher performance than $Ni/Ru-Mn/Al_2O_3$ catalyst at low temperature range.

• The Journal of Korean Society for Radiation Therapy
• /
• v.3 no.1
• /
• pp.27-36
• /
• 1989

In order to calculate the dose on each interest point in five types of irregularly shaped fields used commonly in radiotherapy, the tissue-air ratios (TAR) in these fields for Go-60 gamma radiation were calculated using the newly devised SAR-chart. The TARs calculated from newly method of using the SAR-chart, computer method and approximation method at the interest point were compared to the TARs obtained from measurement. The result are as follows; In case of the interest points on central axis the calculated TARs in irregularly shaped fields by the above mentioned methods were well agreed within the error of $1\%$, whereas for the interest points on off-axis the calculated TARs were resulted in the maximum errors of $2.4\%,\;2.3\%$ and $8.8\%$ respectively. From these results, the accuracy of calculation method of using the SAR-chart was comfirmed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.6 no.1
• /
• pp.66-71
• /
• 1977

An investigation of certain tar food colorants required a relatively inexpensive TLC adsorbent to be used in preparative thin-layer chromatography procedure. As will be shown activated clay and Kieselguhr has excellent physical characteristics for T LC applications, is easily applied, and is good for analytical work as well as showing good separator capabilities with selected groups of compounds. In addition to its usefulness its economical price suggested this article.

• International Journal of Oral Biology
• /
• v.42 no.4
• /
• pp.197-201
• /
• 2017

A novel method for the detection of hydrogen peroxide in aqueous solution was developed via reaction between $H_2O_2$, trivalent titanium ion ($Ti^{3+}$) and 4-(2-thiazolylazo) resorcinol (TAR), resulting in a ternary complex with a maximum UV absorbance at 530 nm. The CE detection of $H_2O_2$ was fast, sensitive and cost-effective without pretreatment procedures. $H_2O_2$ was detected within 15 min at 1 to $100{\mu}M$ range with the lowest detection limit at $1.0{\mu}M$. Under the optimized CE conditions, the concentration of $H_2O_2$ in coffee or tea extract was quantitatively determined. Our results show that CE detection of the ternary complex of $H_2O_2-Ti^{3+}$-TAR has potential applications for the detection of $H_2O_2$ in aqueous sources.

• Journal of the Korean Society of Tobacco Science
• /
• v.6 no.1
• /
• pp.51-62
• /
• 1984

The chemical components of non-blended and blended cigarettes and their smoke have been analyzed to investigate the correlation between them. Some regression of linear equations were obtained based on the simple correlation data(r), for the various smoke components such as tar, nicotine, nitrogen dioxide, steam volatile phenols, formaldehyde, acetaldehyde, acrolein and hydrogen cyanide. Chi-square tests were carried out to observe the probabilities of the values estimated by the regression of linear equations. The probabilities of the greater values were 0.900-0.999 to tar, nicotine, formaldehyde, acetal dehyde, acrolein, steam volatile phenols, nitrogen dioxide and hydrogen cyanide of the non-blended cigarettes, and 0.900-0.999 to tar, nicotine, nitrogen dioxide, steam volatile phenols and static burning rate (SBR) of the blended cigarettes.

• Mycobiology
• /
• v.50 no.2
• /
• pp.150-154
• /
• 2022

Rhytisma lonicericola was identified as a tar spot fungus on Lonicera sp. in 1902, and has since been recorded on several species of Lonicera in China, Japan, and Korea. Most of the previous records of R. lonicericola have been based on a list of disease occurrences in the absence of any formal morphological identification or molecular analyses. Using six newly obtained specimens collected in the past 2 years, we confirmed the tar spot fungus found on L. japonica in Korea as R. lonicericola based on morphological examinations and molecular phylogenetic analyses. This fungus was distinguished from R. xylostei, another tar spot fungus on Lonicera, by ascospore size and geographical distributions. We present detailed mycological information and, for the first time, DNA sequence data useful for the identification of R. lonicericola.

• Journal of Korean Foot and Ankle Society
• /
• v.28 no.1
• /
• pp.1-7
• /
• 2024

Despite the advances in total ankle replacement (TAR), TAR has emerged as a promising alternative to ankle arthrodesis, particularly in severe ankle arthritis. Restoring ankle stability and alignment is the most important technical consideration and the goal of TAR. Hence, additional procedures, such as soft tissue balancing and osteotomies, are often critical parts of surgical planning. This article reviews the basics of joint balancing, offering suggestions on procedure selection for ligamentous balancing and varus and valgus malalignment in TARs.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.4
• /
• pp.279-283
• /
• 2009

Approximately 12,547 kL of oil from the tanker 'Hebei Spirit' released into the western sea of Korea, which subsequently reached and covered extensive areas of the western coastlines of Korea. In the following days great numbers of tar balls hit the southwestern coast. Three different cleanup methods were used to mediate the southwestern coastline tar ball pollution by Korea Coast Guard (KCG) net setting, manual pick up, and sweeping them up. Net setting was useful in protecting coastlines from being hit by tar balls. The cold weather in winter conditions helped the tar ball response efforts because it caused them to harden, allowing them to be swept up from beaches and to be gathered up by hand.