• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.3-7
• /
• 2007

Ultraviolet light(UV-C, wavelength: 200~280nm) is employed profitably for sterilizing drinking water. For most water serving apparatus such as a water purifier, a water cooler and heater, a coffee vending machine and etc., pre-sterilized water may be contaminated secondarily with bacillary inhabitation in a container before serving. In consideration of this problem, a household water tap which is equipped with a sterilization/Purification device in combination with non-contact UV-lamp, was designed to sterilize and purify water at the last outlet just before serving. Hopefully this simple but creative item may be commercialized for household and public use.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.2
• /
• pp.413-419
• /
• 2012

Objective: This study presents an observation and analysis on behavioral characteristics of old users in comparison to young users in the use of control on display interface. Background: Touch interface which allows users to control directly on display, is conceived as delight and easy way of human-computer interaction. Due to the advantage in stimulus-response ensemble, the old users, who typically experiencing difficulties in interacting with computer, would expected to have better experience in using computing machines. Method: Twenty nine participants who are over 50 years old and 14 participants who are in 20s years old were participated in this study. Three primary tasks in touch interface, which are tap, move, and flick, were delivered by the users. For the tap task, response time and point of touch response were collected and the response bias was calculated for each trial. For the move task, delivery time and the distance of finger movements were recorded for each trial. For the flick task, task completion time and flicking distance were recorded. Results: From the collected behavioral data, temporal and spatial differences between young and old users behavior were analyzed. The older users showed difficulty in completing move task requiring eye-hand coordination.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.295-296
• /
• 2012

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.199-203
• /
• 2004

In this paper, we only describe the digital block of two-channel 18-bit analog-to-digital (A/D) converter employing sigma-delta method and xl28 decimation. The device contains two fourth comb filters with 1-bit input from sigma­delta modulator. each followed by a digital half band FIR(Finite Impulse Response) filters. The external analog sigma-delta modulators are sampled at 6.144MHz and the digital words are output at 48kHz. The fourth-order comb filter has designed 3 types of ways for optimal power consumption and signal-to-noise ratio. The following 3 digital filters are designed with 12tap, 22tap and 116tap to meet the specification. These filters eliminate images of the base band audio signal that exist at multiples of the input sample rate. We also designed these filters with 8bit and 16bit filter coefficient to analysis signal-to-noise ratio and hardware complexity. It also included digital output interface block for I2S serial data protocol, test circuit and internal input vector generator. It is fabricated with 0.35um HYNIX standard CMOS cell library with 3.3V supply voltage and the chip size is 2000um by 2000um. The function and the performance have been verified using Verilog XL logic simulator and Matlab tool.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.6
• /
• pp.814-820
• /
• 2009

The arrangement of the general 12-button cellular phone keypad is unified with one or two kind. In general, the several alphabets are arranged in one key. When inputting an English, countries which do not speak English use multi-tap method. We can input next alphabet by pressing key repeatedly. We address the problem of finding multi-tap-based keypad designs which minimize the number of key presses for various case. Genetic algorithms is proposed method for optimal keypad designs. We are to maintain the number of keys, which is ranged from 8 to 12. We also show experimental using non-alphabetically-constrained and alphabetically-constrained arrangement, respectively. Finally, we give improved keypad designs.

• 보존과학연구
• /
• s.28
• /
• pp.105-119
• /
• 2007

Restoration of earthenware is largely composed of selection of clay, making(forming), and firing. This study lays emphasis on the making method and open-air firing. For making methods, This study used coiling method partly with priority given to ring method. The most significant feature of this restoration work is the making method of tap-forming, in which 외박자(out tap instrument) and 내박자(inter tap instrument) would be tapped and formed. For firing, This study used open-air firing method in the most primitive way. This method needs no special device and equipment and makes the work more simple and easy. The previous study was on the making method by archeological and preservation-scientific research but this study emphasized the restoration work in an actual earthenware maker's position. Through the result of this study, This study wish this would be an opportunity to present another model of various restoration methods for other researchers those who wanted to participate in the restoration and openair firing.

• Interaction and multiscale mechanics
• /
• v.3 no.2
• /
• pp.173-191
• /
• 2010

Damage detection plays a very important role to the maintenance of bridge structures. Traditional damage detection methods are usually based on structural dynamic properties, which are acquired from pre-installed sensors on the bridge. This is not only time-consuming and costly, but also suffers from poor sensitivity to damage if only natural frequencies and mode shapes are concerned in a noisy environment. Recently, the idea of using the dynamic responses of a passing vehicle shows a convenient and economical way for damage detection of bridge structures. Inspired by this new idea and the well-established tap test in the field of non-destructive testing, this paper proposes a new method for obtaining the damage information through the acceleration of a passing vehicle enhanced by a tapping device. Since no finger-print is required of the intact structure, this method can be easily implemented in practice. The logistics of this method is illustrated by a vehicle-bridge interaction model, along with the sensitivity analysis presented in detail. The validity of the method is proved by some numerical examples, and remarks are given concerning the potential implementation of the method as well as the directions for future research.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.3
• /
• pp.330-336
• /
• 2009

This paper proposes an on-line voltage management and control solution for a distribution system which can improve the efficiency and accuracy of existing off-line work by collecting customer voltage on-line as well as the voltage compensation capability of the existing ULTC (Under Load Tap Changer) operation and control strategy by controlling the ULTC tap based on pattern clustering and recognition. The proposed solution consists of an ADVMD (Advanced Digital Voltage Management Device), a VMS (Voltage Management Solution) and an OLDUC (On-Line Digital ULTC Controller). An on-line voltage management emulator based on multi-thread programming and the shared memory method is developed to emulate on-line voltage management and digital ULTC control methodology based on the on-line collection of the customer's voltage. In addition, using this emulator, the effectiveness of the proposed pattern clustering and recognition based ULTC control strategy is proven for the worst voltage environments for three days.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.3
• /
• pp.293-296
• /
• 2012

SOC test methodology in ultra deep submicron (UDSM) technology with reasonable test time and cost has begun to satisfy high quality and reliability of the product. A novel hierarchical test architecture using IEEE standard 1149.1, 1149.7 and 1500 compliant facilities is proposed for the purpose of supporting flexible test environment to ensure SOC test methodology. Each embedded core in a system-on- a-chip (SOC) is controlled by test access ports (TAP) and TAP controller of IEEE standard 1149.1 as well as tested using IEEE standard 1500. An SOC device including TAPed cores is hierarchically organized by IEEE standard 1149.7 in wafer and chip level. As a result, it is possible to select/deselect all cores embedded in an SOC flexibly and reduce test cost dramatically using star scan topology.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.9
• /
• pp.1103-1111
• /
• 1999

STACOM will be utilized to control substation voltage in the near future. Although STACOM shows good voltage regulation performance owing to its rapid and continuous response, it needs additional reactive power compensation device to keep control margin for emergency such as fault. ULTC transformer is one of good candidates. This paper presents a Kohonen Neural Network (KNN) based coordination control scheme of ULTC transformer and STACOM. In this paper, the objective function of the coordination control is minimization of both STACOM output and the number of switchings of ULTC transformer while maintaining substation voltage magnitude to the predefined constant value. This coordination, control is performed based on reactive load trend of the substation and KNN which offers optimal tap position in view of STACOM output minimization. The input variables of KNN are active and reactive power of the substation, current tap position, and current STACOM output. The KNN is trained by effective Iterative Condensed Nearest Neighbor (ICNN) rule. This coordination control applied to IEEE 14 bus system and shows satisfactory results.