• 한국농공학회논문집
• /
• 제56권4호
• /
• pp.9-19
• /
• 2014

The objective of this study was to evaluate of the Tank model in simulating runoff discharge from rural watershed in comparison to the SWAT (Soil and Water Assessment Tool) model. The model parameters of SWAT was calibrated by the shuffled complex evolution-university Arizona (SCE-UA) method while Tank model was calibrated by genetic algorithm (GA) and validated. Four dam watersheds were selected as the study areas. Hydrological data of the Water Management Information System (WAMIS) and geological data were used as an input data for the model simulation. Runoff data were used for the model calibration and validation. The determination coefficient ($R^2$), root mean square error (RMSE), Nash-Sutcliffe efficiency index (NSE) were used to evaluate the model performances. The result indicated that both SWAT model and Tank model simulated runoff reasonably during calibration and validation period. For annual runoff, the Tank model tended to overestimate, especially for small runoff (< 0.2 mm) whereas SWAT model underestimate runoff as compared to observed data. The statistics indicated that the Tank model simulated runoff more accurately than the SWAT model. Therefore the Tank model could be a good tool for runoff simulation considering its ease of use.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2010년도 학술발표회
• /
• pp.1400-1404
• /
• 2010

본 연구에서는 현재 시행되고 있는 오염총량관리제 모니터링 시스템에 적용가능한 부하량 추정기법에 대하여 제시하였다. 수정 TANK 모형을 통하여 8일 간격 유량자료의 1일 간격 유량자료로 의 확장을 시행하였다. 그리고 최소분산 비편향 추정기법을 통한 7변수 대수 선형 모형으로 오염 부하량을 추정하였다. 그 결과 TOC 및 BOD 부하량 추정에서 만족스러운 결과를 확인할 수 있었다. 연구의 적용의 일환으로, 낙동강유역의 TOC 및 BOD 항목의 부하량 유황 곡선을 작성하여 전체적인 분포를 살펴보았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.489-492
• /
• 2007

Understanding the thermohydraulic processes in the aquifer is necessary for a proper design of the aquifer thermal energy utilization system under given conditions. Experimental and numerical test were accomplished to evaluate the relationship between the geothermal heat exchanger operation and hydrogeological conditions in the open-loop geothermal system. Sand tank experiments were designed to investigate the open-loop geothermal system. Water injection and extract ion system as open-loop borehole heat exchanger was applied to observe the temperature changes in time at injection well, extraction well and ambient groundwater. The thermohydraulic transfer for heat storage was simulated using FEFLOW for two cases of extraction and injection phase operation in sand tank model. As one case, the movement of the thermal plume was simulated with variable locations of injection and extraction well. As another case, the simulation was performed with fixed location of injection and extraction well. The simulation and experimental results showed that the temperature distribution depends highly on the injected water temperature and the length of injection time and the groundwater flow and pumping rate sensitively affect the heat transfer.

• 한국해양공학회지
• /
• 제33권2호
• /
• pp.106-115
• /
• 2019

The interaction between a sloshing liquid damper (SLD) tank and a rectangular pontoon was investigated under the assumption of the linear potential theory. The eigenfunction expansion method was used not only for the sloshing problem in the SLD tank but also for analyzing the motion responses of a rectangular pontoon in waves. If the frictional damping due to the viscosity of the SLD tank was ignored, the effect of the SLD appeared to be an added mass in the coupled equation of motion. The installation of the SLD tank had a greater effect on the roll motion response than the sway and heave motion of the pontoon. One resonance peak for rolling motion showed up in the case of a frozen liquid in the SLD tank. However, if liquid motion in the SLD tank was allowed, two peaks appeared around the first natural frequency of the fluid in the SLD tank. In particular, the peak value located in the low-frequency region had a relatively large value, and the peak frequency located in the high-frequency region moved into the high-frequency region as the depth of the liquid in the tank increased.

• 신재생에너지
• /
• 제7권4호
• /
• pp.42-49
• /
• 2011

The objective of this paper is to suggest a new method of a wind turbine performance test. The performance test of a wind turbine is generally carried out in a wind tunnel. The test needs not only a high-accuracy measuring system but also durable structure to withstand high speed turbine rotation and wind flow. Therefore, we tried turbine performance test using a towing tank to improve stability and reliability. Because a turbine rotates more slowly and generates more torque in the water than in the wind tunnel under similarity conditions. In this study, we developed turbine performance test systems and verified the turbine test method using a towing tank through comparing results of the wind tunnel and the towing tank test.

• 한국농공학회지
• /
• 제33권2호
• /
• pp.51-60
• /
• 1991

The main objective of this study is to examine the adaptability for the large watershed of the storage tank model which can be applied for the analysis of both long and short terms runoff developed on the basis of hydrologic data for a smaH mountaineous watershed. The results obtained in this study are summarized as follows ; 1. Areal rainfalls of the Dae Chong watershed were calculated by Thiessen method composed of 9 Thiessen networks. 2. Optimal parameters for two types, Model A and Model B of tank models were derived through calibration procedure by standardized Powell method. 3. Monthly simulated flows of Model B are seemed to be closer to the monthly observed than those of Model A during calibration period in the long terms runoff. 4. Relative errors for the simulated flood flows of Model B were apperaed as lower percentage to the observed than those of Model A during calibration period in the short terms runoff. 5. Daily simulated hydrographs of Model B are seemed to be closer to the daily observed than those of Model A during verification period in the long terms runoff. Significance of Model B was highly acknowledged in comparison with Model A in the correlation analysis between annual observed and annual simulated runoff. 6. Reproducibility of simulated flows for Model B is generally seemed to be better than that of Model A during calibration period in the short terms runoff. 7. It can be concluded that reproducibility of Model B is superior to that of Model A in the long and short terms runoff even a large watershed like the result of the small one. 8. It was verified that adaptability for the large watershed of Model B is superior to that of Model A between the two models which were developed by a small watershed characteristics for both long and short terms runoff. 9. Further study for getting a suitable tank model is desirable to be established by the decision, calibration method of initial parameters of tank model and by additional application of another watershed with different watersheds and meterological characteristics.

• 대한토목학회논문집
• /
• 제2권2호
• /
• pp.39-46
• /
• 1982

회전원판접촉법(回轉圓板接觸法)에 의한 폐수처리(廢水處理)의 이해(理解)를 증진(增進)시키고 여러가지 조건(條件)의 변화(變化)에 따라 달라지는 처리효율(處理效率)을 산정(算定)하기 위하여 모형(模型)을 개발(開發)하고 Simulation을 통하여 정상상태(定常狀態)와 비정상상태(非定常狀態)에서의 모형(模型)을 분석(分析)하였다. 회전원판(回轉圓板)에 의한 기질제거모형(基質除去模型)은 용액(溶液)으로부터 미생물막내부(微生物膜內部)로의 기질전달(基質傳達)과 미생물(微生物)에 의한 기질(基質)의 분해(分解)에 의해 처리(處理)가 이루어진다고 가정(假定)하고 정립(定立)되었고 모형(模型)은 여러개의 요소(要素)로 나뉘어진 액체막(液體膜)과 미생물막(微生物膜), 그리고 용액중(溶液中)의 기질농도(基質濃度)에 관한 일련의 물질수지식(物質收支式)으로 구성(構成)된다. 정상상태(定常狀態)에서 처리효율(處理效率)은 기질(基質)의 확산계수(擴散係數)와 미생물(微生物)의 최대기질분해율(最大基質分解率)에 의해 좌우(左右)되고 확산(擴散)에 의한 영향은 용액중(溶液中)의 기질농도(基質濃度)가 낮고 최대기질분해율(最大基質分解率)이 높을 경우 현저하게 나타난다. 기질제거효율(基質除去效率)은 미생물막(微生物膜)의 두께가 얇을 때는 거의 두께에 비례(比例)하여 증가(增加)하나 두께의 증가(增加)에 따라 효율증가(效率增加)는 둔화(鈍化)되고 한계(限界)두께에 이르면 기질(基質)의 침투(浸透)가 불충분(不充分)하여 효율(效率)은 일정(一定)해진다. 비정상상태(非定常狀態)에서 유출수(流出水)의 수질(水質)은 반응조(反應槽)의 체적(體積)에 의해 영향을 받는다. 반응조(反應槽)의 체적증가(體積增加)는 첨두부하(尖頭負荷)에 대하여 첨두농도(尖頭濃度)를 낮게하는 완충효과(緩衝效果)를 나타내기 때문에 반응조(反應槽)는 균등조(均等槽)의 역할을 한다 할 수 있다.

• 한국농공학회지
• /
• 제36권4호
• /
• pp.95-102
• /
• 1994

The series of the papers consist of three parts to describe the development, calibration, and applications of the flood forecasting models for the Youngsan Estuarine Dam located at the mouth of the Youngsan river. And this paper discusses the hydrologic model for inflow simulation at Naju station, which constitutes 64 percent of the drainage basin of 3521 .6km$^2$ in area. A simplified TANK model was formulated to simulate hourly runoff from rainfall And the model parameters were optirnized using historical storm data, and validated with the records. The results of this paper were summarized as follows. 1. The simplified TANK model was formulated to conceptualize the hourly rainfall-run-off relationships at a watershed with four tanks in series having five runoff outlets. The runoff from each outlet was assumed to be proportional to the storage exceeding a threshold value. And each tank was linked with a drainage hole from the upper one. 2. Fifteen storm events from four year records from 1984 to 1987 were selected for this study. They varied from 81 to 289rn'm The watershed averaged, hourly rainfall data were determined from those at fifteen raingaging stations using a Thiessen method. Some missing and unrealistic records at a few stations were estimated or replaced with the values determined using a reciprocal distance square method from abjacent ones. 3. An univariate scheme was adopted to calibrate the model parameters using historical records. Some of the calibrated parameters were statistically related to antecedent precipitation. And the model simulated the streamflow close to the observed, with the mean coefficient of determination of 0.94 for all storm events. 4. The simulated streamflow were in good agreement with the historical records for ungaged condition simulation runs. The mean coefficient of determination for the runs was 0.93, nearly the same as calibration runs. This may indicates that the model performs very well in flood forecasting situations for the watershed.

• 조명전기설비학회논문지
• /
• 제20권5호
• /
• pp.72-77
• /
• 2006

본 논문에서는 구조체의 전위상승에 대해 수조실험장치에 의한 측정값과 CDEGS 프로그램에 의한 계산값의 비교를 나타낸다. 시험전류가 구조체 모형을 통해 흐를 때, 실시간으로 수조실험장치를 이용하여 구조체의 유형에 따른 전위상승이 측정 및 분석되었고, CDEGS 프로그램에 의해 계산되었다. 구조체 모형은 160:1의 축척으로 4가지 유형에 대해 설계 및 제작되었다. 측정값과 계산값이 비교되었을 때, 유사한 분포를 나타내었으며 이를 통해 측정의 신뢰성을 얻게 되었다. 망상형 철골구조로서 전기적 케이지 방식인 구조체 모형 B에서 가장 낮은 전위상승이 발생하였으며, 전위상승 분포는 구조체에 부착된 콘크리트의 저항률 및 흡수율에 의존하는 특성을 나타내었다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2001년도 학술발표회 논문집(I)
• /
• pp.245-250
• /
• 2001