• Journal of Wetlands Research
• /
• v.20 no.4
• /
• pp.353-362
• /
• 2018

The purpose of this study is to suggest a structure plan for improving the utilization of inactive storage in the dam for overcoming the drought. Inactive storage in the dam is composed of the emergency storage and dead storage. The emergency storage can be used for the case of emergency such as drought. But, in general, the dead storage for sedimentation is not used even for the emergency. Therefore, this study considers the part of dead storage that the sedimentation is not progressed yet can be used during the severe drought period and is called "drought storage in a dam". The accurate Sediment Level(SL) analysis for the computation of the drought storage should be performed and so the present and future SL in the dam reservoir is estimated using SED-2D linked with RMA-2 model of SMS. After the consideration of additionally available storage capacity based on the estimated SL, the drought storage is finally determined. Present data based on historical data, future predicted future climate factors by Representative Concentrarion Pathways(RCP) 8.5 scenario. Then, using the TANK model, dam inflows were determined, and future period such as SL and drought storage were suggested. As the results, we have found that the available drought storage will be reduced in the future when we compare the present drought storage with the future one. This is due to a increase variability of climate change. Therefore, we should take the necessary study for the increase of available drought storage in the future.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.41-48
• /
• 2004

Several centrifuge modelling tests were performed to compare sand compaction pile (SCP) with gravel compaction pile (GCP) at the point of bearing capacity. SCP and GCP were installed as 30, 40, 50, 60, 70% of replacement ratio in cylindrical model tank (diameter = 20 cm, height = 40 cm), and the loading tests were carried out to analyze the bearing characteristics of soft clay ground reinforced by SCP and GCP. As a result of loading tests, the bearing capacities of soft grounds reinforced by SCP and GCP increase with increasing replacement ratio of pile, and a GCP reinforced ground has larger bearing capacity than that of a SCP reinforced ground. Several proposed bearing capacity equations for ground reinforced by SCP or GCP were compared with loading test results.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.35 no.2
• /
• pp.23-32
• /
• 1993

This paper describes the background and the development of a hydrologic network flow model. The model was development to simulate daily water demand and supply for selected stream reaches within a watershed, and used as a tool for evaluating, simulating, and planning a water resources system. The proposed network flow model considers daily runoff from subareas, various water demands, and diversion structures within each subarea. Daily streamflow at a reach is simulated after balancing the water demands from subareas. The lateral inflow from subareas is simulated using a modified tank model. Total water demands consist of the daily demands for agricultural, domestic, industrial, livestock, fishery, and environmental uses within a rural district. The return flow, diversions from sources and storage components such as reservoirs were also incorporated into the mode l . The developed model is a generalized version that may be applied to different combinations of river reaches for a given system. This may help potential users identify areas where water supply does not suffice the demands for different time horizons.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.185-185
• /
• 2016

일반적인 송 배수시스템의 운영은 지대가 높은 곳에 위치한 배수지(tank)에 용수를 저장한 후, 자연유하에 의해 수요절점으로 용수를 공급한다. 이때 배수지에 용수를 송수하기 위한 펌프장 운영에서 많은 전기에너지가 소모된다. 일반적으로 송수펌프의 운영은 다년간의 운영자료를 기반으로 운영자의 판단에 의해 이루어지거나, SCADA(Supervisory Control and Data Acquisition)시스템을 통해 관측되는 배수지 수위를 기준으로 펌프 작동여부를 결정하고 있다. 본 연구에서는 이러한 기존 펌프운영방법을 개선하고 좀 더 효율적인 운영방법을 모색하기 위해 실시간 송수펌프 최적운영 모형을 개발하였다. 최적화 기법으로는 유전자 알고리즘(genetic algorithm)을 사용하였으며, 다양한 제약조건(operational constraints)을 적용하고 급수지역의 24시간 용수사용량을 미리 예측하여 실제 시스템의 운영형태와 근접하게 반영하였다. 또한 최적화 과정에서 상수관망해석 프로그램(EPANET)을 연계하여 수요절점의 수압조건 및 시스템의 운영상황을 모의하였다. 개발된 모형을 국내 P시의 광역상수도 시스템에 실제 적용하였으며, 현장 실시간 운영 데이터를 입수하여 전력사용량, 배수지수위, 이산화탄소 발생량 등을 비교, 분석하였다. 개발 모형을 이용하여 펌프운영을 실시하였을 경우, 기존의 운영방식과 비교하여 경제적/환경적으로 뚜렷한 개선 효과를 확인할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.5
• /
• pp.474-481
• /
• 1997

Waterjet propulsion generally refers to propulsion of ships by internally mounted pumps with proper ducting. This arrangement of the actuator component of the system leads to the fundamental differences with respects to screw propeller system. In this paper, the basic hydrodynamic characteristics of waterjet propulsion was outlined to clarify the application consideration and proposal for carrying out model self-propulsion tests with waterjet propelled models was presented. The results of model self-propulsion tests carried out in the Hyundai Maritime Research Institute towing tank with catamaran ship were presented.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.359-365
• /
• 1998

A global optimization method known as the Shuffled Complex Evolution method from the University of Arizona(SCE-UA) was used for calibrating a Tank model. The model was calibrated with error-free synthetic data, and the SCE-UA method was found to effectively search optimal parameters. Historical data from an agricultural watershed was used to calibrate and validate the model parameters. The simulated results were in good agreement with the observed.

• KCID journal
• /
• v.5 no.2
• /
• pp.9-19
• /
• 1998

A series of model tank and rigid wall permeameter tests was performed in order to determine the long-term hydraulic conductivity of the sand-bentonite liners reinforced by geotextile. Main conclusions are as follows 1. The maximum dry density and optimum

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.5
• /
• pp.805-817
• /
• 2016

This study considered the existing approximation theories of solitary wave for stable generation of it with different waveforms in a hydraulic/numerical wave tank for coping with the tsunami. Based on the approximation theory equations, two methods were proposed to estimate various waveforms of solitary wave. They estimate different waveforms and flow rates by applying waveform distribution factor and virtual depth factor with the original approximate expressions of solitary wave. Newly proposed estimation methods of solitary wave were applied in the wave generation of hydraulic/numerical wave tank. In the result, it was able to estimate the positional information signal of wave generator in the hydraulic wave tank and to find that the signal was very similar to an input signal of existing hydraulic model experiment. The waveform and velocity of solitary wave was applied to the numerical wave tank in order to generate wave, which enabled generate waveform of tsunami that was not reproduced with existing solitary wave approximation theory and found that the result had high conformity with existing experiment result. Therefore, it was able to validate and verify the two proposed estimation methods to generate stable tsunami in the hydraulic/numerical wave tank.

• Journal of Navigation and Port Research
• /
• v.34 no.8
• /
• pp.623-628
• /
• 2010

High speed marine vehicle, such as semi-planing, planing craft have been developed recently. These ships paid attention to the resistance characteristics, especially in high speed region. Model test method is divided to two equipment greatly, first 'Towing tank', second 'C.W.C.'. It is difficult to estimate a resistance characteristics for high speed boat. because these are made for low speed ship. This paper suggests a new model test method and system. This is real sea model test and it's comprised of eight part. Firstly, This method is tested at C.W.C that is possible to using in real sea model tes using low speed boat modelt. And then, Real sea model test and CFD calculation are performed and compared with tow way used high speed boat model. It can be a good way to estimate a performance for high speed boat.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.321-326
• /
• 2012

장기유출모형을 이용하여 농업용저수지 유입량을 예측하고 농업용수 필요수량 및 홍수기 저수지 홍수조절을 통한 방류량 데이터를 이용하여 장기간에 대한 농업용저수지 저수율을 계산하였다. 계산결과와 실측 저수율 데이터의 비교 검증을 통하여 모형의 적용성을 평가하였다. 대상유역은 담양댐 지점이며 유역면적은 $47.2km^2$ 이며 주 하천 연장은 12.0km 이다. 담양댐은 저수용량에 비하여 유역면적이 작기 때문에 댐 계획 당시 순창군 구림면에 유역면적 $18.4km^2$ 인 2개의 보를 축조하여 유역변경방식으로 간접유역 유출량을 비관개기 및 홍수시에 도수하며 최대 도수량은 $10m^3/s$이다. 장기유출모의는 한국수자원공사(2001)에서 수행한 전역최적화기법인 콤플렉스 혼합진화기법을 통하여 추정된 나주지점의 모형보정 성과를 활용하였으며 모의기간은 1981-2010년(30년)이다. 장기유출모의 결과 담양댐 유역의 평균 유출율은 67% 인 것으로 분석되었다. 농업용수 필요수량은 한국농촌공사에서 산정한 연도별 필요수량 산정결과를 이용하여 실측 농업용수 월별 방류량 자료를 기준으로 관개개간인 4월 21일-9월 20일(163일)동안 월별로 분배하여 적용하였다. 홍수조절은 기존 댐 상시만수위, 홍수기제한수위 데이터를 근거로 운영하였다. 일별저수지 운영모형은 미공병단의 HEC-5 모형을 이용하였으며 한국농어촌공사 농촌용수종합 정보시스템(RAMIS)의 댐 일별 저수율 현황과 기존저수지 일별 저수지 모의운영결과를 비교 검증하였다. 모형수행결과 실측저수율과 모형수행결과의 상관계수는 0.93 인 것으로 분석되었다. 연구결과, 장기유출모의 결과와 연계하여 농업용수, 하천유지용수, 홍수조절을 고려한 저수지 운영을 통하여 비교적 정확하게 농업용저수지 저수율을 예측할 수 있을 것으로 판단된다. 본 연구성과를 바탕으로 농업용저수지의 장기적인 용수수급현황을 예측하여 효율적인 용수공급계획을 수립할 수 있을 것으로 기대된다.