• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.9
• /
• pp.4453-4458
• /
• 2012

Angiogenesis plays a significant role in colorectal cancer (CRC) and cyclooxygenase-2 (COX-2) appears to be involved with multiple aspects of CRC angiogenesis. Our aim was to investigate the inhibitory effects of Tan II-A (Tanshinone II-A, Tan II-A) on tumor growth in mice, as well as alteration of expression of COX-2 and VEGF in CRC. We established the mice xenograft model of C26 CRC cell line, and injected 0.5, 1, 2mg/kg of Tan II-A and 1mg/kg of 5-FU in respectively in vivo. Then, we assayed tumor weight and volume, and evaluated microvascular density and expression of VEGF. COX-2 promoter and COX-2 plasmids were transfected into HCT-116 cells, followed by detection of COX-2 promoter activity by chemiluminescence, and detection of COX-2 mRNA expression by fluorescence quantitative PCR. Taken together, the results showed Tan II-A could inhibit tumor growth and suppress the VEGF level in vivo. HCT-116 cell experiments showed marked inhibitory effects of Tan II-A on COX-2 and VEGF in a dose-dependent manner. The results indicate that Tan II-A can effectively inhibit tumor growth and angiogenesis of human colorectal cancer via inhibiting the expression level of COX-2 and VEGF.

• Korean Journal of Agricultural Science
• /
• v.25 no.2
• /
• pp.247-259
• /
• 1998

Analyses which loads were regarded as instant load and gradual step load were performed with data measured on gradually loaded field, and the results were inspected to find effect of load condition, and final settlements predicted by Hyperbolic, Tan's, Asaoka's, and Monden's method were compared with each other. According to above analyses, the following conclusions were obtained. Settlement curves which loads were regarded as instant load and gradual step load were beginning to coincide at time of twice duration of embankment. On the ground installed vertical drain, the result of Hyperbolic, Tan's, Asaoka's, Monden's, curve fitting I, and curve fitting II (simple, Carrillo) methods make conclude that Asaoka, curve fitting I, and curve fitting II methods agree with measured settlement.

• Journal of Aquaculture
• /
• v.13 no.2
• /
• pp.137-145
• /
• 2000

Capacity of water treatment of the three phase fluidized bed reactor as a biofilter in the seawater recirculating system was evaluated. The water treatment system consists of fluidized bed reactor for ammonia removal, cartridge filter for solid removal and ozone contactor for disinfection. Mean concentration of water quality parameters: COD, TAN, $NO_2$-N, $NO_3$-N, SS and alkalinity were 9.0, 0.22, 0.05, 20.0, 9.5 and 70.0 mg/l, respectively; the relevant values were 7.6 for pH and 3.64 NTU for turbidity. These indicate the maintenance of good water quality by the treatment system. The influent TAN loading rate in to the fluidized bed reactor ranged from 4.3 to 32.9 g/$m^3$/day, and averaged to 20 g/$m^3$/day. TAN removal efficiency of each phase of the fluidized bed reactor was 47-60%, indicating the effective ammonia removal. During operation the effluent of fluidized bed reactors also maintained the unionized ammonia nitrogen level below 0.002 mg/l.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.6
• /
• pp.445-451
• /
• 2019

This paper presents the design of a water-cooled radio-frequency(RF) load with simple structure, for use in the ultrahigh-frequency (UHF) band. After establishing a formula to obtain the physical properties that affect RF matching, we measure the permittivity and $tan{\delta}$(Loss tangent) of tap water. Because the temperature of tap water increases upon applying high power, we measure the permittivity and $tan{\delta}$ for all changes in the temperature of tap water. In order to reduce the length of the water-load, molybdate with high $tan{\delta}$ is mixed with tap water. The loss tangent of the mixture is found to be approximately 26 times higher than that of tap water. Finally, we manufacture a water-cooled RF load and measure its characteristics. A reflection coefficient of -19 dB and bandwidth of 15 % is obtained at 460 MHz.

• Journal of the Korean Vacuum Society
• /
• v.16 no.5
• /
• pp.330-337
• /
• 2007

Influence of glass dielectric property (dielectric constant K, dielectric loss) on the external electrode fluorescent lamps of the dielectric barrier discharge has been investigated with 4-different glasses. Conventional borosilicate glass tubes with $K=5.6{\sim}5.9$ and tan ${\delta}=5.0{\times}10^{-3}{\sim}6.0{\times}10^{-3}$ and aluminosilicate glass tubes with high K=6.6 and low tan ${\delta}=1{\times}10^{-4}$ and soda-lime glass tribes with K=7.7 and tan ${\delta}=1.37{\times}10^{-2}$ have been compared. The high value of dielectric constant K makes the capacitance of external electrode fluorescent lamps intensity and enhances the discharge efficiency. The dielectric loss of tan ${\delta}$ shows the factor of power consumption in the external electrode to induce heats and to be weak in pinhole stability. The aluminosilicate glass tubes of high K and low tan ${\delta}$ have been enhanced by $14{\sim}18%$ in luminance and efficiency in comparison with the conventional borosilicate glass tubes and the aluminosilicate external electrode fluorescent lamps are strong against the pinhole formation. Soda-lime glass tubes with high K and high tan ${\delta}$ are a little favorable in luminance and efficiency and they are very weak in pinhole occurrence.

• BMB Reports
• /
• v.39 no.1
• /
• pp.68-75
• /
• 2006

In higher plants, P450s participate in the biosynthesis of many important secondary metabolites. Here we reported for the first time the isolation of a new cytochrome P450 cDNA that expressed in a stem-specific manner from Camptotheca acuminata (designated as CaSS), a native medicinal plant species in China, using RACE-PCR. The full-length cDNA of CaSS was 1735 bp long containing a 1530 bp open reading frame (ORF) encoding a polypeptide of 509 amino acids. Bioinformatic analysis revealed that CASS contained a heme-binding domain PFGXGRRXCX and showed homology to other plant cytochrome P450 monooxygenases and hydroxylases. Southern blotting analysis revealed that there was only one copy of the CaSS present in the genome of Camptotheca acuminata. Northern blotting analysis revealed that CaSS expressed, in a tissue-specific manner, highly in stem and lowly in root, leaf and flower. Our study suggests that CaSS is likely to be involved in the phenylpropanoid pathway.

• BMB Reports
• /
• v.37 no.5
• /
• pp.538-545
• /
• 2004

A new CRT binding factor (CBF) gene designated Cbcbf25 was cloned from Capsella bursa-pastoris, a wild grass, by the rapid amplification of cDNA ends (RACE). The full-length cDNA of Cbcbf25 was 898 bp with a 669 bp open reading frame (ORF) encoding a putative DRE/CRT (LTRE)-binding protein of 223 amino acids. The predicted CbCBF25 protein contained a potential nuclear localization signal (NLS) in its N-terminal region followed by an AP2 DNA-binding motif and a possible acidic activation domain in the C-terminal region. Bioinformatic analysis revealed that Cbcbf25 has a high level of similarity with other CBF genes like cbf1, cbf2, and cbf3 from Arabidopsis thaliana, and Bncbf5, Bncbf7, Bncbf16, and Bncbf17 from Brassica napus. A cold acclimation assay showed that Cbcbf25 was expressed immediately after cold triggering, but this expression was transient, suggesting that it concerns cold acclimation. Our study implies that Cbcbf25 is an analogue of other CBF genes and may participate in cold-response, by for example, controlling the expression of cold-regulated genes or increasing the freezing tolerance of plants.

• Elastomers and Composites
• /
• v.48 no.3
• /
• pp.201-208
• /
• 2013

In this study, effect of different amounts of sulfur and vulcanization accelerators in the acrylonitrile styrene-butadiene rubber (AN-SBR)/silica compounds on the properties of tire tread compound were studied. As a result, cure rate and degree of cross-linking of the compounds were increased due to enhanced cross-linking reactivity by the increased amounts of sulfur and vulcanization accelerators. Also, abrasion resistance and the mechanical properties such as hardness and modulus of the compounds were improved by enhanced degree of cross-linking of the compounds. For the dynamic properties, tan ${\delta}$ value at $0^{\circ}C$ was increased due to the increase of glass transition temperature ($T_g$) by enhanced degree of cross-linking of the compound, and tan ${\delta}$ value at $60^{\circ}C$ was decreased. Initial cure time ($t_1$) showed the linear relationship with tan ${\delta}$ value at $60^{\circ}C$. This result is attributed that reduced initial cure time ($t_1$) of compounds by applying increased amount of curatives can form cross-linking in early stage of vulcanization that may suppress development of filler network. This result is verified by observation on the surface of annealed compounds using AFM (atomic force microscopy). Consequently, decreased initial cure time is considered a very important parameter to reduce tan ${\delta}$ at $60^{\circ}C$ through reduced re-agglomeration of silica particles.

• Elastomers and Composites
• /
• v.41 no.4
• /
• pp.260-267
• /
• 2006

SBR (styrene-butadiene rubber; 25 wt% of solid contents) nanocomposites reinforced with OLS(organically modified layered silicates) were manufactured via the latex method. Two types of OLS are prepared, i.e. dodecylamine (primary amine) modified montmorillonite (DA-MMT) and N, N-dimethyldodecylamine (tertiary amino) modified MMT (DDA-MMT). X-ray diffraction (XRD) and transmission electron microscopy (TEM) were employed to characterize the layer distance of OLS and the morphology of the nanocomposites. SBR nanocomposites reinforced with ternary phase filler (carbon black/silica/OLS) systems also manufactured. Dynamic mechanical thermal analysis (DMTA) was performed on these composites to determine the loss factor (tan $\delta$) over a range of temperature($-20^{\circ}C{\sim}80^{\circ}C$). The results showed that there was significant changes on the values or tan $\delta$ with the addition of small amount of the OLS. By increasing the contents of OLS, the values of tan $\delta$ at $0^{\circ}C$ increased but those of tan $\delta$ at $60^{\circ}C$ decreased with increasing OLS contents.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.100-100
• /
• 2003

양식 산업에 있어 사육 생물의 빠른 성장은 가장 요구되는 특성이다. 특히, 선발육종을 통한 성장 개선은 사료의 효율적 이용과 연관되어 있으며, 균형 잡힌 단백질 대사 등을 통해 이루어진다. 대부분의 경골어류는 단백질 대사의 마지막 부산물로 암모니아를 생성하여 배설하며, 이를 통한 사료 내 단백질의 효율적 이용성을 비교하는 척도로 제시되어 왔다(Ming, 1985). 따라서 본 실험에서는 한국해양연구원에서 선발육종 해 온 참돔과 일본 양식산 참돔 및 이들의 교배 자손들을 대상으로 일간 먹이 공급, 절식 그리고 1회 만복 공급에 따른 암모니아성 질소 배설률을 조사하였으며, 일간 먹이 공급에 따른 각 교배 자손들의 분 배출 특성을 알아보았다. 실험어는 일본 양식산인 JPN 교배구 자손과 한국해양연구원 선발육종산인 KORDI F4 교배구 자손, 그리고 JPN$\times$KORDI F4♂ 교배구 자손을 대상으로 실시하였다. 체중이 각각 17.1$\pm$0.1 g (JPN 교배구; 그룹 1), 17.7$\pm$0.1 g (JPN♀$\times$KORDI F4♂; 그룹 2), 21.5$\pm$0.1 g (KORDI F4; 그룹 3)인 참돔 치어를 각각 15마리씩 3반복 수용하여 실험에 이용하였다. 실험어는 지름이 33 cm이고 높이가 34 cm인 둥근 투명 플라스틱 수조에 수용하고 분 수집기인 TUF column (passing effluent water through a special test tube) system을 이용 어체중의 3%에 해당하는 사료 량을 일간 세 번에 나누어 동일량을, 09시부터 17시까지 4시간 간격으로 공급한 14일째에 일간 먹이 공급에 따른 24시간 동안의 참돔 종간 잡종 치어의 총암모니아성 질소(total ammonia nitrogen, TAN) 배설률 및 분 배출률을 조사하였다. 이 조사가 끝난 후 3일간 절식시킨 다음 내인성 암모니아성 질소 배설을 조사하였으며, 이어서 1회 만복 사료 공급한 다음 이에 따른 암모니아성 질소 배설 경향을 알아보았다. 일간 먹이 공급에 따른 각 실험구의 암모니아 배설은 세 가지 계통 참돔치어 모두 먹이 섭취 후 암모니아 배설로 인한 TAN 농도가 지속적으로 증가하는 경향을 보였으며, 시간당 TAN 배설률을 적분한 결과, 그룹 1과 2 그리고 3의 일간 TAN 배설률은 각각 637.3$\pm$36.5 mg/kg fish/day, 684.3$\pm$18.5 mg/kg fish/day 그리고 772.8$\pm$17.3 mg/kg fish/day로 나타나 그룹 3의 일간 TAN 배설률이 가장 높은 결과를 보였다. 3일간 절식 후 그룹 1, 2, 그리고 2의 TAN 배설률은 각각 8.08~14.15 mg/kg fish/hr, 6.50~12.20 mg/kg fish/hr, 그리고 6.67~8.60 mg/kg fish/hr의 범위를 보여 거의 일정한 농도로 나타났다. 시간당 TAN 배설률을 적분한 결과, 그룹 1, 2 그리고 3의 일간 TAN 배설률은 각각 286.9$\pm$28.3 mg/kg fish/day, 215.7$\pm$5.5 mg/kg fish/day 그리고 179.3$\pm$7,7 mg/kg fish/day로 나타나 먹이 공급과는 달리 내인성 TAN 배설의 경우 그룹 1의 배설률이 가장 높은 결과를 보였다. 1회 만복 먹이 공급에 따른 TAN 배설 경향은 그룹 1과 2의 TAN 배설률은 먹이 공급 6시간 후 가장 높은 값인 44.19$\pm$2.90 mg/kg fish/hr와 41.70$\pm$1.40 mg/kg fish/hr을 보였고, 그룹 3에서는 4시간 후에 가장 높은 값인 31.23$\pm$1.39 mg/kg fish/day로 나타났다. 일간 먹이 공급에 따른 각 실험구의 총 분 배출량은 그룹 1의 경우 총 분 배출량은 2.17$\pm$0.1 g/kg fish와 91.15$\pm$4.53 g/kg feed로 나타났고, 그룹 2에서는 2.26$\pm$0.14 g/kg fish와 95.02$\pm$3.18 g/kg feed, 그룹 3에서는 2.81$\pm$0.73 g/kg fish와 132.85$\pm$34.0 g/kg feed로 나타나 유의적인 차이는 보이지 않았으나(P>0.05), 그룹 3의 배출 비율이 높은 것으로 나타났다. 시간 경과에 따른 분 배출 비율은 그룹 1의 경우 먹이 공급 24시간 후 총 분의 60.6%를 보여 반면, 그룹 2와 3에서는 각각 67.8%와 77.8%를 보여 그룹 1이 다른 그룹에 비해 분 배출 비율이 낮은 것으로 나타났다.