• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.6
• /
• pp.180-189
• /
• 2012

This study was carried out to suggest an experiment based for selecting Sedum, which can adapt well with heat tolerance in extensive green roof system. The heat tolerance of Sedum subject to laboratory high temperature treatment and heat processing time were evaluated using electrolyte leakage, chlorophyll content and regrowth test, and the relation between soil water content and heat tolerance were researched. Logistic model of nonlinear regression analysis was used to evaluate the lethal temperatures that were predicted with the range of $45.0{\sim}48.1^{\circ}C$(soil water content 5%), $47.5{\sim}49.3^{\circ}C$(10%), $48.6{\sim}52.8^{\circ}C$(15%) in 6-hours high-temperature treatment. The higher the soil water content, the stronger the heat resistance property of Sedum. there is. The higher the treatment temperature, the lower the chlorophyll content, and the less the soil water content, the faster the chlorophyll decomposition. The order of hot-temperature resistance was S. reflexum>S. takevimense>S. middendorffianum>S. album>S. sieboldii>S. spurium when soil water content was 5%. The order of hot-temperature resistance was S. album>S. reflexum>S. spurium>S. takevimense>S. middendorffianum>S. sieboldii when soil water content was 15%. The more of soil water content, S. album, S. reflexum, S. spurium had stronger tolerant of hot temperature. These results were consistent with those from the regrowth test and the heat tolerance tested by electrolyte leakage evaluation.

• Journal of Wetlands Research
• /
• v.19 no.2
• /
• pp.202-210
• /
• 2017

Shear stress is one of the most important mechanical factors used in various fields and is important for the design of artificial channels. Current shear stresses have been used in the past, but there are factors that are difficult to actually measure or calculate, such as bed shear stress and energy slope in the equation used. In particular, the energy slope is a very difficult factor to estimate, and it is difficult to estimate the slope and flow velocity of the boundary layer although the energy slope can be used to obtain the shear stress distribution. In addition, the bed shear stress among the shear stress distribution is very difficult to measure directly, and the research is somewhat slower than the velocity. In this study, we have studied the simple calculation of the average flow velocity and the shear stress distribution using entropy M without reflecting the energy gradient, and we used existing laboratory data to demonstrate the utility of the applied equation. The stress distribution in the graphs was comparatively analyzed. In the case of the uniform flow and the non-uniform flow, the correlation coefficient was almost identical to 0.930-0.998.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.384-389
• /
• 2006

The needs for Light Railroad Transit(LRT) have been increased due to the heavy traffic congestions in large cities like Seoul, Korea. Korean government is seeking the LRT system development (including planning, designing, construction, and maintenance and operations) in terms of public-private-partnership (PPP). At the private sector side, it is crucial to estimate the life cycle cost (LCC) to project the cash flow during the O&M period. Since the most construction and O&M cost of LRT project is at the bridge construction, a cost analysis model and a cost breakdown structures (CBS) on LRT bridges are discussed through in depth literature reviews. Construction and maintenance cost of bridges are collected and analyzed. LCC is analyzed by types of bridge superstructures and historical data of repair and rehabilitation (R&R) is investigated. There have been scarce number of LCC analysis on railway bridges. This research delivers a well-defined CBS and maintenance cost data, which will be a great benefit to the systematic maintenance strategy development for railroad bridges.

• Journal of Engineering Education Research
• /
• v.11 no.1
• /
• pp.64-75
• /
• 2008

A new product development and product realization process (PRP) is a circulating and feedback process by generating ideas through creative problem solving process. The early stages of PRP correspond to conceptual design and product development, in which a large portion of product life cycle cost can be saved. The optimal design method for this stage is a robust design suggested by Taguchi. Quality must be 'engineered in' since it can not be 'inspected out.' A robust design is an engineering methodology to improve the quality of a product by minimizing the efforts of variations without eliminating the causes. The objective of this study is to propose a scheme and a case study of robust design for exploring design parameters, and introduce a creative problem solving process. Major research subjects include a creative problem solving process, robust design procedure and their implementation. For the experiment of Taguchi method, a toy catapult is adopted. For the creativity development, a short project is assigned to devise a similar tool with the toy catapult. A reference model is suggested to compare and evaluate their ideas.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.2
• /
• pp.39-56
• /
• 2019

In this study, we analyzed the effect of the Eungam Loop Line of Seoul Subway Line 6 on the sale price of adjacent row and multi-family houses on the accessibility and structural characteristics of subway stations. This study empirically analyzed a total of 17,938 cases from 2006 to 2017 based on data on the sale price of row and multi-family houses. In summary, the results of this study using the Hedonic Price Model are as follows. First, this study confirms that the Eungam Loop Line characteristics have a positive effect on the sale price as it is adjacent to the subway station. It is noteworthy that the sale price of 100-200m segment has a positive effect, and the sale price of Bulgwang station, which has excellent mobility and connectivity with CBD, YBD and GBD, has a positive effect. Second, this study shows the locational characteristics such as distance to bus stop, distance to mart, and distance to school have influence on the sale price. Third, this study finds the land characteristics such as land area, land shape, land facing, and road width, have significant effects on the sale price. Fourth, this study discovers the sale price is also is also affected by building and floor characteristics such as the type of housing, building area, the number of households, building age, elevator, and floor level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.464-473
• /
• 2016

The air temperatures of the coast and inland are rising due to an increase in carbon dioxide emissions and abnormal climate phenomena caused by global warming, El Nino, La Nina and so on. The sea levels of the Earth are rising by approximately 2.0 mm per year (global average value) due to the thermal expansion of sea water, melting of glaciers and other causes by global warming. On the other hand, when it comes to designing a hydraulic structure or coastal hydraulic structure, the standard of the design water level is decided by analyzing four largeness tide values and a harmonic constant with the observed tidal water level or simulating numerical model. Therefore, the design tidal water level needs to consider an increasing speed of the seawater level, which corresponds to the design frequency. In the present study, the observed tidal water levels targeting 46 tidal stations operated by the Korea Hydrographic and Oceanographic Administration (KHOA) from the beginning of observations to 2015 per hour were collected. The variation of the monthly and yearly and increasing ratio were performed and divided into 7 seas, such as east and west part of the Southern Sea, south part and middle of the East Sea, south part and middle of the Western Sea, and Jeju Sea. The current study could be used to determine the cause of local seawater rises and reflect the design tidal water level as basic data.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.2
• /
• pp.1-9
• /
• 2009

Impact of daylighting on the visual environment can improve occupant's well-being by providing visual comfort. Also, daylighting can save energy. However, glare from window can be a direct hazard to vision and can cause serious discomfort. Selecting glare source on a window plane is very important for evaluating discomfort glare from windows. But former glare indices can not identify the range of the glare source properly. In this study, difference in glare sensation with uniform and non-uniform glare sources are evaluated to identify the range of the glare source. The glare source was assumed as $120{\times}120[cm]$ window model. The window was divided into three parts with different luminance values. The experiment was conducted under 1[m], 1.5[m], 3[m] distance from the glare source. Two results were obtained from the experiments. First, the degree of discomfort glare increased as average window luminance increased. Second, the middle and lower part of the window plane can affect evaluation of discomfort glare as well as the upper part of the window plan. These results can be used for selecting the glare source in a window with non-uniform luminance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.408-414
• /
• 2016

This study will find meaningful independent variables for criterion variables that affect influencing on purchase intention in social network service, on the basis of the results of a meta-analysis. We reviewed a total of 29 studies related purchase intention in social network service published in Korea journals between 2005 and 2015, where a cause and effect relationship is established between variables that are specified in the conceptual model of this study. The result of the meta-analysis might be summarized that the highest effect size (r = .455) is the path from the satisfaction to the purchase intention. The second biggest effect size (r = .398) was found in the path between the word of mouth to the purchase intention. Next, the effect size (r = .386) in the path from the trust to the purchase intention showed very lower. Finally, the result of the meta analysis can be concluded that lower effect size (r = .342) Further, the predictive variables of this study have power of explanation about 22%-12% or more. Based on these findings, several theoretical and practical implications were suggested and discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.143-146
• /
• 2015

A meta-analysis is a statistical integration method that delivers an opportunity to overview the entire result of integrating and analyzing many quantitative research results. This study will find meaningful mediator variables for criterion variables that affect between pre and post in metabolic syndrome studies, on the basis of the results of a meta-analysis. We reviewed a total of 36 studies related metabolic syndrome published in Korean journals between 2000 and 2015, where a cause and effect relationship is established between variables that are specified in the conceptual model of this study. In this meta-analysis, the path between pre and post in waist circumference showed the biggest effect size (r = .420). The second biggest effect size (r = -.402) was found the path between pre and post in high density lipoprotein cholesterol. By the way, one the smallest effect size (r = .234) was obtained the path between pre and post in diastolic blood pressure. Thus, we present the theoretical and practical implications of these results and discuss the differences between these results through a comparative analysis with previous studies.

• BMB Reports
• /
• v.28 no.6
• /
• pp.556-561
• /
• 1995

The purpose of this study was to establish an in vitro culture method of tumor-specific T cells, and determine the efficacy of the cultured tumor-specific cytotoxic T-lymphocytes (CTL) as an agent of anti-tumor immunotherapy against a murine lymphoma, TIMI.4. Tumor-specific T-lymphocytes derived from C57BL/6 mice (thy-1.2) immune to TIMI.4 were activated by in vitro stimulation with the irradiated TIMI.4 cells, and expanded by restimulation with TIMI.4 in the presence of the concanavalin A-stimulated rat spleen culture supernatant, and splenic antigen-presenting cells. In vitro restimulation enhanced markedly the proportion of $CD8^+$, a predominant surface marker of CTL and the cytotoxic activity in the cultured immune T cell population. The resulting TIMI.4-specific T cells were adoptively transferred into nude mice. The tumor cells residing in the host after 7 days of adoptive transfer to B6.PL (thy-1.1) mice were quantified by use of an antibody directed to the thy-1.2 allele. The TIMI.4 cells in the recipient nude mice were decreased in a dose-dependent manner. Anti-tumor activity of the TIMI.4-specific T cells was also demonstrated by a survival test, where the tumor-bearing nu/nu mice which received the activated T-cells survived about 30% longer than the control mice which received the tumor cells alone. These suggest that adoptive transfer of TIMI.4-specific T cells could be a candidate for effective therapy of the murine lymphoma.