• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.179-179
• /
• 2008

$BaTiO_3$를 기본조성으로 하는 PTC 써미스터는 Curie 온도이상에서 저항이 급격히 상승하는 산화물 반도체 세라믹이다. 이러한 성질을 이용하여 degaussing 소자, 정온 발열체, 온도센서, 전류 제한소자 등 상업적으로 여러 분야에서 연구되고 있다. 또한 원가절감 등을 위하여 Ni 내부전극을 사용하여 환원 분위기에서 소결하는 칩 타입에 대한 연구가 진행되고 있다. 본 연구에서는 Sm 함량(0.1at%~1.0at%)을 달리한 $BaTiO_3$(Si, Mn, Ca) 계를 선택하여 3%$H_2/N_2$ 분위기에서 1200~$1260^{\circ}C$, 2h 소결한 후 공기 중에서 재산화 처리하고 재산화 시간에 따른 PTC 특성 변화에 대하여 고찰하였다. 재산화 온도와 시간은 각각 $800^{\circ}C$와 0.5h~10h으로 하였다. Sm 함량을 달리하여 환원 분위기에서 소결한 시편의 미세구조와 PTC 특성과의 상관관계를 관찰한 결과, 소결온도가 낮을수록 PTC 특성은 좋아졌으며, 상온 비저항은 Sm 함량이 높아질수록 낮아졌다. 또한 Sm 함량이 높아질수록 jumping ratio$(R_{max}/R_{25^{\circ}C})$는 낮아졌다. 재산화 시간에 따른 PTC 특성은 다소 떨어졌지만 소결온도에 따라 달리 나타났다. Jumping ratio$(R_{max}/R_{25^{\circ}C})$는 Sm을 0.7 at% 첨가한 계에서 재산화를 1시간 처리한 시편에서 가장 우수하였다.

• Journal of Aerospace System Engineering
• /
• v.10 no.1
• /
• pp.59-65
• /
• 2016

Korea Aerospace Research Institute (KARI) is developing an electric-driven HALE UAV in order to secure system and operational technologies since 2010. Based on the 5 years of flight tests and design experiences of the previously developed electric-driven UAVs, KARI has designed EAV-3, a solar-powered HALE UAV. EAV-3 weighs 53 kg, the structure weight is 21 kg, and features a flexible wing of 19.5 m in span with the aspect ratio of 17.4. Designing the main wing and empennage of the EAV-3 the amount of the bending due to the flexible wing, 404 mm at 1-G flight condition based on T-800 composite material, and side wind effects due to low cruise speed, V_cr = 6 m/sec, are carefully considered. Also, unlike the general aircraft there is no center of gravity shift during the flight. Thus, the static margin cuts down to 28.4% and center of gravity moves back to 31% of the Mean Aerodynamic Chord (MAC) comparing to the previously developed scale-down HALE UAVs, EAV-2 and EAV-2H, to minimize a trim drag and enhance a performance of the EAV-3. The first flight of the EAV-3 has successfully conducted on the July 29, 2015 and the test flight above the altitude 14 km has efficiently achieved on the August 5, 2015 at the Goheung aviation center.

• Korean Journal of Poultry Science
• /
• v.27 no.3
• /
• pp.235-242
• /
• 2000

A feeding trial was carried out effect of supplemental Lactobacillus on productivity, egg quality and intestinal microflora in 320 21 weeks - old laying hens for 12 week. Supplemented Lactobacillus strains were Lactobacillus amylovorus LLA7(LA), Lactobacillus crispatus LLA9(LC) and Lactobacillus vaginalis LLA11(LV). Three strains mixed to basal diet which containing 2,800㎉/kg ME, 16% CP with none, LA, LC, LV, LA+LC, LA+LV, LC+LV and LC+LC+LV. Supplemental level was 10(sup)7 cfu/g diet. Egg production was tended to increase with adding Lactobacilus, but not difference significantly. Average egg weight was heavier in adding Lactobacillrs compared to the none, and heaviest in LA+LV, LC+LV(P〈0.05). In periodic observation, the gap of egg weight with adding Lactobacillus or not was severe persisting laying periods. The diet containg MC or LV was better than LA, which means the difference by Lactobacillus strains for egg weight. Daily egg mass also increased in adding Lactobacillus about 1.1 to 2.3 g/hen, but not difference significantly. Feed intake and feed conversion were not difference regardless Lactobacillus strains and laying periods. Haugh unit improved with adding Lactobacillus. Cecal Lactobacillus spp. was increased with adding Lactobacillus(P〈0.05), didn't observed E. coli depression. In summary, supplemental Lactobacillus could improve for egg production, egg weight, egg mass and egg white. And those of effect expect much beneficial with mixing Lactobacillus which established well as single strain.

• Journal of Welding and Joining
• /
• v.29 no.1
• /
• pp.99-106
• /
• 2011

Joint strength between a solder ball and a pad on a substrate is one of the major factors which have effects on electronic device reliability. The effort to improve solder joint strength via surface cleaning, heat treatment and solder composition change have been in progress. This paper will discuss the method of solder ball joint strength improvement using LF hydrogen radical cleaning treatment and focus on the effects of surface treatment condition on the solder ball shear strength and interfacial reactions. In the joint without radical cleaning, voids were observed at the interface. However, the specimens cleaned by hydrogen-radical didn't have voids at the interface regardless of cleaning time. The shear strength between the solder ball and the pad was increased over 120%(about 800gf) when compared to that without the radical treatment (680gf) under the same reflow condition. Especially, at the specimen treated for 5minutes, ball shear strength was considerably increased over 150%(1150gf). Through the observation of fracture surface and cross-section microstructure, the increase of joint strength resulted from the change of fracture mode, that is, from the solder ball fracture to IMC/Ni(P) interfacial fracture. The other cases like radical treated specimen for 1, 3, 7, 9min. showed IMC/solder interfacial fracture rather than fracture in the solder ball.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.1
• /
• pp.119-124
• /
• 2015

Background: DICER, one of the microRNA (miRNA) biogenesis proteins, is involved in the maturation of miRNAs and is implicated in cancer development and progression. The results from previous epidemiological studies on associations between DICER rs1057035 polymorphism and cancer risk were inconsistent. Thereforewe performed this meta-analysis to summarize possible associations. Materials and Methods: We searched all relevant articles on associations between DICER rs1057035 polymorphism and cancer risk from PubMed, EMBASE, Chinese Biomedical Literature and Chinese National Knowledge Infrastructure until August 2014. Odds ratios (ORs) with 95% confidence intervals (CIs) were calculated to assess any associations. Heterogeneity tests, sensitivity analyses and publication bias assessments were also performed in this meta-analysis. All analyses were conducted using STATA software. Results: Seven case-control studies, including 4,875 cancer cases and 7,800 controls were included in the meta-analysis. Overall, the results indicated that the C allele of DICER rs1057035 polymorphism was significantly associated with decreased cancer risk in allelic comparison, heterozygote and dominant genetic models (C vs T: OR=0.88, 95%CI 0.81-0.95, p=0.002; TC vs TT: OR=0.85, 95%CI 0.77-0.93, p=0.001; CC/TC vs TT: OR=0.86, 95%CI 0.78-0.94, p=0.001). In the subgroup analysis by ethnicity, a significantly decreased cancer risk was found in Asian but not Caucasian populations. Conclusions: The present meta-analysis suggests that the C allele of the DICER rs1057035 polymorphism probably decreases cancer risk. However, this association may be Asian-specific and the results should be treated with caution. Further well-designed studies based on larger sample sizes and group of populations are needed to validate these findings.

• Journal of Korean Traditional Oncology
• /
• v.13 no.1
• /
• pp.55-61
• /
• 2008

Nearly 800,000 new colorectal cancer cases are believed to be occur each year, which account for approximately 10% of all incident cancers, and mortality from colorectal cancer is estimated at nearly 450,000 per year. We report one patient with rectal cancer of stage III. The patient had a rectal cancer(StageIII T3N2M0) and underwent low anterior resection in 2004 followed by chemotherapy and radiotherapy. Lymph node metastases were found in 2005 and the patient was treated by palliative chemotherapy, which could not supress the lymph node metastases increase. The patient visited Kyunghee University East-West Neo Medical Center(KHNMC) in 2006 and was treated using allergen-removed Rhus Verniciflua Stokes(aRVS). Radiotherapy was done simultaneously in 2006. There was no evidence of recurrence since then. The patient showed no side effects. This case report brings forth the importance of a thorough study in rectal cancer in the traditional Korean medical point of view, along with the long-term effect of aRVS.

• Journal of Biosystems Engineering
• /
• v.30 no.4 s.111
• /
• pp.235-241
• /
• 2005

For better and large utilization of rice husk, the production and consumption status, differences in chemical composition and heating value due to region and variety, and thermogravimetric characteristic of rice husk were studied. In addition, the differences in chemical composition due to region and variety and the crystallization characteristic of rice husk ash were also studied. Approximately 800,000 M/T of rice husk was produced per year in Korea, which is about $18\%$ of the paddy production by weight. Noticeable varietal and regional difference pattern in chemical composition was not found among the domestic rice husk samples. Their average ash content and higher heating value were $16.4\%$ and 16,660 kJ/kg by dry basis, respectively. A relation seemed to exist between the carbon content and higher heating value. Noticeable difference pattern in chemical composition was not found among the domestic rice husk ash samples. The $SiO_2$ contents were a little low, the maximum being $92.9\%,$ and the contents of major components such as CaO, MgO, and $K_2O$ were also lower compared with foreign rice husk ash due to the deficiency of compost matters in domestic soils. Thermogravimetry study showed the thermal decomposition of rice husk started at about $250^{\circ}C,$ followed by relatively fast combustion of combustible gas until the temperature rose to $350^{\circ}C.$ After $350^{\circ}C,$ combustion of the carbon component proceeded relatively slowly as the temperature increased. Therefore, the ignition temperature of the rice husk could be estimated around $300^{\circ}C$. Crystallization of $SiO_2$ in the rice husk ash was found from the combustion temperature of $750^{\circ}C$ and became distinctly when the combustion temperature exceeded $900^{\circ}C$. The ash became darker with $SiO_2$ crystallization.

• Journal of the Korean Society of Visualization
• /
• v.13 no.1
• /
• pp.43-48
• /
• 2015

Collective cell migration is a fundamental phenomenon observed in various biological processes such as development, wound healing, and cancer metastasis. During the collective migration, cells undergo changes in their phenotypes from those of stable to the migratory state via the process called epithelial-mesenchymal transition (EMT). Recent findings in biology and biochemistry have shown that EMT is closely related to the cancer invasion or metastasis, but not much of the correlations in kinematics and physical forces between the neighboring cells are known yet. In this study, we aim to understand the cell migration and stress distribution within the expanding cell cluster. We constructed the in vitro cell cluster on the hydrogel, employed traction force microscopy (TFM) and monolayer stress microscopy (MSM) to visualize the physical forces within the expanding cell monolayer. During the expansion, cells at the cluster edge exhibited enhanced motility and developed focal adhesions that are the essential features of EMT while cells at the core of the cluster maintained the epithelial characteristics. In the aspect of mechanical stress, the cluster edge had the highest traction force of ~90 Pa directed toward the cluster core, which means that cells at the edge actively pull the substrate to make the cluster expansion. The cluster core of the tightly confined cells by neighboring cells had a lower traction force value (~60 Pa) but the highest intercellular normal stress of ~800 Pa because of the accumulation of traction from the edge of the monolayer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.302-302
• /
• 2012

최근 비 휘발성 메모리 시장의 확대와 수요가 많아지면서, 비휘발성 메모리 소자의 제작에 대한 연구가 활발히 진행되고 있다. 특히, 실리사이드 나노입자를 적용한 소자는 현 실리콘 기반의 반도체 공정의 적용이 용이하다. 따라서 본 연구에서는 실리사이드 계열의 화합물 중에서 일함수가 4.63 eV인 Vanadium silicide (V3Si) 나노입자 메모리소자를 제작하여 전기적 특성과 열 안정성에 대하여 알아보았다. p-Si기판에 약 6nm 두께의 SiO2 터널층을 건식 산화 방법으로 성장시킨 후 V3Si 나노입자를 제작하기 위해서 V3Si 금속박막을 스퍼터링 방법으로 4 nm~6 nm의 두께로 터널 절연막 위에 증착시켰다. 그리고 컨트롤 절연막으로 SiO2를 초고진공 스퍼터를 이용하여 50 nm 증착하였고, 급속 열처리 방법으로 질소 분위기에서 $800^{\circ}C$의 5초 동안 열처리하여 V3Si 나노 입자를 형성하였다. 마지막으로 200 nm두께의 Al을 증착하고, 리소그래피 공정을 통하여 채널 길이와 너비가 각각 $2{\mu}m$, $5{\mu}m$, $10{\mu}m$를 가지는 트랜지스터를 제작하였다. 제작된 시편의 V3Si 나노입자의 크기와 균일성은 투과 전자 현미경으로 확인하였고, 후 열처리 공정 이후 V3Si의 존재여부의 확인을 위해서 X-ray 광전자 분광법의 표면분석기술을 이용하여 확인하였다. 소자의 전기적인 측정은 Agilent E4980A LCR meter, 1-MHz HP4280A와 HP 8166A pulse generator, HP4156A precision semiconductor parameter analyzer을 이용하여 측정온도를 $125^{\circ}C$까지 변화시키면서 전기적인 특성을 확인하였다. 본 연구에서는 온도에 선형적 의존성을 가지는 전하누설 모델인 T-model 을 이용하여 나노입자 비휘발성 메모리소자의 전하누설 근원을 확인한 후, 메모리 소자의 동작 특성과의 물리적인 연관성을 논의하였다. 이를 바탕으로 나노입자 비휘발성 메모리소자의 열적안정성을 확보하고 소자 특성향상을 위한 최적화 구조를 제안하고자 한다.

• Korean Journal of Materials Research
• /
• v.6 no.7
• /
• pp.692-699
• /
• 1996

nptype Si(100)웨이퍼를 precleaning하고 HF 용액에 dip etching한 후 E-beam dvaporator에 장착하여 Co 단일막($170\AA$, $340\AA$)과 Co/Ti 이중막($200\AA$/ $(50-100)\AA$)을 성장시켰다. 시편의 RTA 과정에서는 N2분위기에서 direct annealing 방식으로 열처리 온도와 시간을 변화시켜가며 Co-silicidation 공정을 수행하였다. Co 단일막으로 형성된 Co-실리사이드의 면저항은 $500^{\circ}C\leq$T$\leq$$850^{\circ}C$범위에서 열처리 온도와 시간의 변화에 관계없이 거의 일정한 값을 나타내었다. Co/Ti 이중막의 경우 Co-실리사이드의 형성온도가 Co 단일막의 경우에 비해 높게 나타나고 낮은 비저항의 CoSi2를 얻기 위해서는 $800^{\circ}C$이상의 온도로 열처리해야 함을 알 수 있었다. XRD 분석결과, Co 단일막으로부터 얻어진 CoSi2는 (111) 및 (220) 결정상을 나타내었으나, Co/Ti 이중막에 의한 CoSi2는 (200)결정상만이 나타나서 Si(100)기판과 에피층을 이루고 있음을 알 수 있었다. 본 실험에서 CoSi2의 비저항은 약 $18\mu$$\Omega$.cm로 나타났으며, TEM 및 AES 분석으로부터 Co/Ti bilayer-실리사이드가 다량의 Si과 Ti 외에 소량의 Co가 섞여있는 표면 복합층과, Si과 Co만이 존재하는 내부 에피층으로 구성됨을 확인하였다.