• 제목/요약/키워드: T2WI

검색결과 233건 처리시간 0.026초

퇴비재료의 교반빈도가 육계분과 유우분 혼합물 퇴비화 성능에 미치는 영향 (Influences of Mixing Frequency on the Composting Performance of the Broiler and Dairy Manure Mixtures)

  • 박금주;배영환;홍지형;위태욱
    • 한국축산시설환경학회지
    • /
    • 제12권1호
    • /
    • pp.41-44
    • /
    • 2006
  • 2중필름 온실계사에서 육계를 사육하였을 때 발생하는 계분을 처리할 수 있는 수동 교반형 퇴비화시스템을 개발하였으며, 교반빈도가 퇴비화 온도에 미치는 효과를 분석하였다. 병원균 사멸에 필요한 $55^{\circ}C$ 이상의 온도를 유지한 기간은 무교반에서 88시간 1회/4일의 교반에서는 179 시간, 1회/2일의 교반에서는 200 시간으로 교반회수가 빈번할수록 그 기간이 길어지는 것으로 나타났다.

  • PDF

치매(痴?)의 침구치료(鍼灸治療)에 대(對)한 문헌적(文獻的) 고찰(考察) (The Philological Study on Pathology, Acupuncture and Moxibustion of Dementia)

  • 김동석;서상수;권순철
    • Korean Journal of Acupuncture
    • /
    • 제21권2호
    • /
    • pp.177-192
    • /
    • 2004
  • Objectives : This study is designed to investigate the pathology, acupuncture and moxibustion therapy applicable of the dementia through literature of oriental medicine. Results : The findings of this study are as follows ; 1. The cause of dementia is internal damage of seven emotions(七情內傷), deficiency of the kidney essence(腎精不足), retention of dampness in the mental(痰迷心竅). 2. The acupuncture meridians used often for dementia are $Tok-maek(GV),\;Chok-t'aeyang\;Pang-gwang-Ky\check{o}ng(BL),\;Chok-yangm\check{o}yng\;Wi-Ky\check{o}ng(ST),\;Su-gwor\check{u}m\;Shimp'o-Ky\check{o}ng(PC),\;Su-so\check{u}m\;Shim-Ky\check{o}ng(HT)$. 3. The spots on the body suiTable for acupuncture used for therapy of the dementia are 98 points and extra points are 6 points, total therapeutic acupunture points are 104 points. And acupunture points are frequently used Shinmun(神門-HT7, 24), Paek'oe(百會-GV20, 19), Chok-samni(足三里-ST36, 18), Sugu(水溝-GV26, 17), P'ungnyung(豊隆-ST40, 16), Taech'u(大椎-GV14, 14), $Sam\check{u}mgyo(三陰交-SP6,\;14)$, Shimsu(心兪-BL15, 14), $Taen\check{u}ng(大陵-PC7,\;11)$, Nogung(勞宮-PC8, 11), Sosang(少商-LU11, 10), Kansa(間使-PC5, 10), Naegwan(內關-PC6, 10). 4. The acupoints used often on moxibustion are Paek'oe(百會-GV20), Chang-gang(長强-GV1), Taech'u(大椎-GV14), Kansa(間使-PC5). Conclusion : It is recommended that further study of many sided investigations in the future.

  • PDF

CsX+ SNMS의 Matrix Effect 감소연구

  • 문환구;김동원;한철현;김영남;심태언
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 1992년도 제2회 학술발표회 논문개요집
    • /
    • pp.17-18
    • /
    • 1992
  • SIMS는 뛰어난 원소검찰감도의 깊이분해능을 가지고 있어서 깊이에 따른 미량불순물 분석에 필수적인 장비이지만, 시료와 불순물의 변화에 따라 이온화율과 깎이는 속도가 달라서 일어나는 matrix effect 때문에 표준시료없이 정량분석을 할 수 없는 문제점이 있다. 이런 SIMS의 단점을 보완하기 위한 방법으로 개발된 여러 가지 SNMS기술중 SIMS에 아무런 기계장치를 덧붙이지 않고도 정량화개선효과를 가져오는 CsX+ SNMS에 대한 연구를 진행하여, 지금까지 밝혀진 실리콘 산화막등에서의 주성분원소 조성비분석을 통해 SNMS기능을 확인하고 SIMS의 주 분석대상인 불순물농도분석에의 적용가능성을 실험해 보았다. 이를 위해 실리콘에 BF2 이온주입후 붕소분포분석시 강한 matrix effect를 나타내는 불소의 효과를 SNMS와 SIMS로 비교하였으며, 검출한계와 dynamic range도 조사하였다. 실험결과 CsX+ SNMS기술은 matrix effect 때문에 실제 분포와 다른 값으로 검출되는 불순물 시료 분석에 적용할 수 있음을 알았다.

  • PDF

홍역 후 발생된 급성 뇌염 진단시 Tc-99m ECD 뇌혈류 SPECT의 임상적 유용성 (The Clinical Usefulness of Tc-99m ECD Brain SPECT in Acute Measles Encephalitis)

  • 임석태;손명희
    • 대한핵의학회지
    • /
    • 제37권4호
    • /
    • pp.229-234
    • /
    • 2003
  • 목적: 홍역 감염 후 속발되는 뇌염은 사망률이 높아 조기진단 및 적극적인 치료가 예후에 중요하다. 저자들은 홍역 후 발생된 뇌염에 대한 Tc-99m ECD 뇌혈류 SPECT와 뇌핵자기공명영상(MRI)의 진단 성능을 비교하였고 뇌혈류 SPECT상 중등도 이상의 심한 뇌혈류 감소가 호발하는 부위를 알아보았다. 대상 및 방법: 홍역으로 진단받은 112명 중에서 의식저하, 경련, 마비 등의 임상증상과 혈청 및 뇌척수액에서 홍역 특이항체가 관찰되어 홍역 후 급성 뇌염으로 진단받고 Tc-99m ECD 뇌혈류 SPECT와 MRI를 시행받은 11명(M : F=4 : 7, 연령 $1.6{\sim}14$세)을 대상으로 하였다. SPECT상 관찰되는 뇌혈류는 0(정상)에서 3(결손)으로 점수화하였고 2점 이상인 경우를 중등도 뇌혈류 감소로 정의하였다. 홍역 후 발생된 뇌염 환아에서 MRI와 SPECT의 두부병소 진단 성능과 중등도 뇌혈류 감소의 호발부위를 알아보았다. 결과: MRI 시행결과 7명(63.6%)에서 T2-강조영상에서 회백질의 고강도 변화가 관찰되었으나, SPECT상 11명(100%) 모두에서 뇌혈류 감소 부위가 관찰되었다. 중등도 뇌혈류 감소는 전두엽(81.8%), 측두엽(72.7%), 후두엽(27.3%), 기저핵(27.3%), 두정엽(9.1%) 순서로 호발하였다. 결론: 홍역 후 발생된 뇌염 환아에서 두부병소를 진단하는데 MRI에 비하여 Tc-99m ECD 뇌혈류 SPECT가 좀더 도움이 될 것으로 사료된다.

사물인터넷 기술을 이용한 가스상 물질 측정용 스마트센서 개발과 향후과제 (Development of an IoT Smart Sensor for Detecting Gaseous Materials)

  • 김욱;김영교;유연선;정기효;최원준;이완형;강성규;함승헌
    • 한국산업보건학회지
    • /
    • 제32권1호
    • /
    • pp.78-88
    • /
    • 2022
  • Objectives: To develop the smart sensor to protect worker's health from chemical exposure by adopting ICT (Information and Communications Technology) technologies. Methods: To develope real-time chemical exposure monitoring system, IoT (Internet of Things) sensor technology and regulations were reviewed. We developed and produced smart sensor. A smart sensor is a system consisting of a sensor unit, a communication unit, and a platform. To verify the performance of smart sensors, each sensor has been certified by the Korea Laboratory Accreditation Scheme (KOLAS). Results: Chemicals (TVOC; Total Volatile Organic Compounds, Cl2: Chlorine, HF: Hydrogen fluoride and HCN: Hydrogen cyanide) were selected according to a priority logic (KOSHA Alert, acute poisoning statistics, literature review). Notifications were set according to OEL (occupational exposure limit). Sensors were selected based on OEL and the capabilities of the sensors. Communication is designed to use LTE (Long Term Evolution) and Wi-Fi at the same time for convenience. Electronic platform were applied to build this monitoring system. Conclusions: Real-time monitoring system for OEL of hazardous chemicals in workplace was developed. Smart sensor can detect chemicals to complement monitoring of traditional workplace environmental monitoring such as short term and peak exposure. Further research is needed to expand the scope of application, improve reliability, and systematically application.

Development of a polystyrene phantom for quality assurance of a Gamma Knife®

  • Yona Choi;Kook Jin Chun;Jungbae Bahng;Sang Hyoun Choi;Gyu Seok Cho;Tae Hoon Kim;Hye Jeong Yang;Yeong Chan Seo;Hyun-Tai Chung
    • Nuclear Engineering and Technology
    • /
    • 제55권8호
    • /
    • pp.2935-2940
    • /
    • 2023
  • A polystyrene phantom was developed following the guidance of the International Atomic Energy Association (IAEA) for gamma knife (GK) quality assurance. Its performance was assessed by measuring the absorbed dose rate to water and dose distributions. The phantom was made of polystyrene, which has an electron density (1.0156) similar to that of water. The phantom included one outer phantom and four inner phantoms. Two inner phantoms held PTW T31010 and Exradin A16 ion chambers. One inner phantom held a film in the XY plane of the Leksell coordinate system, and another inner phantom held a film in the YZ or ZX planes. The absorbed dose rate to water and beam profiles of the machine-specific reference (msr) field, namely, the 16 mm collimator field of a GK PerfexionTM or IconTM, were measured at seven GK sites. The measured results were compared to those of an IAEA-recommended solid water (SW) phantom. The radius of the polystyrene phantom was determined to be 7.88 cm by converting the electron density of the plastic, considering a water depth of 8 g/cm2. The absorbed dose rates to water measured in both phantoms differed from the treatment planning program by less than 1.1%. Before msr correction, the PTW T31010 dose rates (PTW Freiberg GmbH, New York, NY, USA) in the polystyrene phantom were 0.70 (0.29)% higher on average than those in the SW phantom. The Exradin A16 (Standard Imaging, Middleton, WI, USA) dose rates were 0.76 (0.32)% higher in the polystyrene phantom. After msr correction factors were applied, there were no statistically significant differences in the A16 dose rates measured in the two phantoms; however, the T31010 dose rates were 0.72 (0.29)% higher in the polystyrene phantom. When the full widths at half maximum and penumbras of the msr field were compared, no significant differences between the two phantoms were observed, except for the penumbra in the Y-axis. However, the difference in the penumbra was smaller than variations among different sites. A polystyrene phantom developed for gamma knife dosimetry showed dosimetric performance comparable to that of a commercial SW phantom. In addition to its cost effectiveness, the polystyrene phantom removes air space around the detector. Additional simulations of the msr correction factors of the polystyrene phantom should be performed.

푸른곰팡이 대치배양에 의한 꽃송이버섯 균사 생장 특성 및 계통간 교잡균주의 rDNA 분석 (Characteristic of mycelial growth of cauliflower mushroom (Sparassis latifolia) using replacement culture with Trichoderma and rDNA analysis in genealogy of crossbreeding strain)

  • 오득실;김현석;김영;위안진;윤병선;박화식;박형호;왕승진
    • 한국버섯학회지
    • /
    • 제12권1호
    • /
    • pp.41-51
    • /
    • 2014
  • ${\beta}$-glucan 함량이 높다고 알려진 꽃송이버섯의 농가재배 활성화를 위하여 푸른곰팡이 내성균주를 선발하고자 푸른곰팡이 대치배양에 의한 꽃송이버섯 균사생장 특성을 확인하였으며, 또한 생장이 우수한 신품종을 개발하고자 교잡육종 균주에 대한 유전 다양성을 분석하였다. 먼저 푸른곰팡이 대치배양에 의한 꽃송이버섯 균사의 생장 특성을 확인한 결과, 6951 (T. viride) 균주에서는 대치선을 형성한 후 별다른 변화를 보이지 않았고, 6952 (T. spp.) 균주에서는 대치선을 형성한 다음 보다 많은 포자를 형성하는 것이 관찰되었다. 그러나 6426 (T. harzianum) 균주에서는 꽃송이버섯 균사가 생장하고 있던 부분까지 모두 덮어버리는 것이 확인되었다. 그 중 특이하게도 구례에서 채집선발한 균주인 JF02-06 균주에서는 다른 균주에 비해 푸른곰팡이 포자가 형성되지 않는 것을 확인되어 다소 푸른곰팡이에 대한 저항성을 갖는 것으로 사료되었다. 전남 산림자원연구소에서 보유 중인 균주 중 생장 및 자실체 발생이 우수한 모균주를 선발하여 교잡을 실시하여 생장특성을 조사한 결과, 미송톱밥배지에서 JF02-47, 49, 50 균주의 균사생장량이 우수한 것으로 확인되었다. 이러한 교잡육종 균주의 유전 다양성을 분석하기 위하여 ITS1, 5.8S와 ITS4 영역에 대한 염기서열을 분석한 결과 Genebank에 등록된 다른 꽃송이버섯 균주와 높은 유의성을 갖는 것으로 확인되었다. 이러한 꽃송이버섯의 포자 및 균사를 현미경으로 관찰하여 생장 특성을 확인한 결과, 포자의 크기는 장경 $6{\mu}m$, 단경 $5{\mu}m$의 물방울 모양으로 확인되었고, 균사에서 3가지 형태의 꺽쇠가 관찰되었다. 균사의 폭은 $3{\mu}m$이며 꽃송이버섯 균사의 특징으로는 약 50% 정도 꺽쇠에서 균사가 뻗어나가는 특성을 갖고 있음이 확인되었다. 균사의 생장 속도는 $0.507{\mu}m/min$이며, 2차 균사는 $0.082{\mu}m/min$의 속도로 생장하다가 모균사와 평행을 이루는 시점에서는 모균사의 생장속도와 유사한 속도로 생장하였다. 꺽쇠발생은 약 5시간 동안 균사 내부 전해질의 이동이 관찰된 후 작은 꺽쇠를 형성하였다. 약 3시간 후 격막이 형성되기 시작하였으며, 그로부터 2시간 후 최종적으로 완성되었다. 이러한 특성을 갖는 꽃송이버섯의 푸른곰팡이 저항성을 확인하고, 교잡균주의 유전 다양성 및 균사의 생장 특성을 확인하여 꽃송이버섯에 대한 기초적인 이해를 높이고, 더 나아가 버섯산업 발전에 이바지하고자 한다.

미송톱밥을 이용한 꽃송이버섯 재배의 최적 배지 조성과 버섯의 β-glucan 함량 비교 (Optimal Medium Composition of Cauliflower Mushroom (Sparassis latifolia) Cultivation Using Douglas Fir Wood Chip and Comparison of The β-glucan Contents of The Fruiting Body)

  • 왕승진;김현석;위안진;윤병선;박화식;박형호;오득실
    • Journal of the Korean Wood Science and Technology
    • /
    • 제42권4호
    • /
    • pp.428-438
    • /
    • 2014
  • 최근 다양한 언론매체 및 국내외 연구논문들을 통해 꽃송이버섯의 기능성이 부각되고 있다. 이에 꽃송이버섯의 농가 대량재배 일반화를 위하여 최적톱밥 입자크기 및 ${\beta}$-glucan 함량이 높은 재배법 연구를 수행한 결과 T7 (1~2 mm 25%, 2~4 mm 50%, 4 mm 이상 25%) 배지와 같이 입자크기가 일정비율로 혼합된 배지에서 $11.5{\pm}1.0$ cm/44 days로 비교적 우수한 균사생장을 보였으며 자실체생산 역시 대조구보다 높은 $142.9{\pm}17.7g$의 생중량으로 상품성이 있는 꽃부분이 85%의 비율을 차지하였다. 배지조성 조건에 따른 ${\beta}$-glucan 함량은 모든 자실체에서 꽃부분에 비해 기부가 1.4~2.4배의 높은 함량을 보였고 이 중 이스트 300 ppm이 첨가된 PCF300 (미송 + 옥수수분말 + 소맥분 + 이스트 300 ppm) 배지의 꽃송이버섯 기부가 59.5%로 가장 높은 ${\beta}$-glucan 함량을 나타냈다. 그러나 꽃부분에서는 비교적 낮은 33.0%의 함량을 보여 꽃부분의 ${\beta}$-glucan 함량을 높일 수 있는 추가적인 연구가 필요할 것으로 사료된다. 따라서 본 연구결과를 토대로 꽃송이버섯 재배시 T7조건인 1~2 mm 미송톱밥 25%, 2~4 mm 미송톱밥 50%, 4 mm 이상 미송톱밥 25%의 비율로 톱밥입자 크기를 조절한후 옥수수분말과 소맥분을 첨가하여 배지조제후 이스트 300 ppm첨가하면 ${\beta}$-glucan 함량이 높은 꽃송이버섯 생산이 가능할 것으로 사료된다.

몇가지 탄저병균의 분생포자형성에 미치는 광선의 영향 (Effect of light on conidial formation in several anthracnose fungi)

  • 정후섭
    • 한국응용곤충학회지
    • /
    • 제7권
    • /
    • pp.57-59
    • /
    • 1969
  • 4종의 탄저병균, Colletrichum panacicola, C. gloeosporides, C. truncatum 및 C. nicotianae의 분생포자형성에 미치는 광선의 영향을 감자과당한천배지에서 각 분생포자현탁액을 Petri접시 전면에 접종하여 시험하였다. C. nicotianae를 제외한 세 탄저병균은 지속광선구에서 다른 두구보다 분생포자형성이 증가되었는데 그 두 구간에는 현저한 차이가 없었다. 공시 탄저병균 별로 보면 C. panacicola의 분생포자량이 가장 적었고 C. gloeosporioides는 중간, C. truncatum은 가장 많았다. 분생포자형성량의 차이는 공시 탄저병균(P=0.99), 광선처리 (P=0.95) 및 그 상호작용(P=0,99)에 따라 통계학적으로 유의성이 있었다.

  • PDF

간호·간병통합서비스 병동 간호사와 일반 병동 간호사의 위임 준비성, 비판적 사고성향, 의사소통 능력이 직무만족에 미치는 영향 (Effects of Preparedness towards Delegation, Critical Thinking Disposition, and Communicative Competence on Job Satisfaction: A Comparison of Comprehensive Nursing Care Service Ward Nurses and General Ward Nurses)

  • 위다혜;김윤경
    • 임상간호연구
    • /
    • 제28권3호
    • /
    • pp.211-222
    • /
    • 2022
  • Purpose: This study aimed to identify the effects of preparedness towards delegation, critical thinking disposition, and communicative competence on job satisfaction among comprehensive nursing care service ward nurses and general ward nurses. Methods: The participants in this study were 218 nurses from two university hospitals. Data were collected using self-administered questionnaires and were analyzed using SPSS Statistics/WIN 21.0, including descriptive statistics, x2 test, Fisher's exact test, t-test, ANOVA, Scheffeé test, Pearson's correlation coefficient, and multiple linear regression analysis. Results: For comprehensive nursing care service ward nurses, the significant influencing factors on job satisfaction were age (β=-.37, p=.041), marital status (β=.35, p=.001), critical thinking disposition (β=.29, p=.003), and communicative competence (β=.28, p=.002) with the explanatory power was 39.0% (F=12.00, p<.001). On the other hand, for general ward nurses, the significant influencing factors on job satisfaction were advanced degree (β=.29, p=.047), critical thinking disposition (β=.23, p=.040), and communicative competence (β=.42, p<.001) with the explanatory power was 33.0% (F=11.78, p<.001). Conclusion: The results of this study suggest the importance of developing and applying education programs to improve critical thinking disposition and communicative competence of nurses. This would enhance the comprehensive nursing service and increase overall nursing manpower resources. In addition, further studies are needed to improve nursing work environments and to develop strategies for enhancing preparedness towards delegation, which would increase the job satisfaction of nurses in the comprehensive nursing care service wards.