• 소성∙가공
• /
• 제20권1호
• /
• pp.11-16
• /
• 2011

Recently, according to the rapid development of display, many display applications, such as, cellular phone, navigation, monitor and LCD TV have been changed from CRT type to LCD type. BLU(Back Light Unit) is one of main parts in LCD unit and generally, it consists of a light source, a reflective sheet, a LGP(Light Guide Plate), a diffuser sheet, and two prism sheets. The most important component of BLU is a light guide plate, which diffuses the input light to the TFT-LCD module uniformly. The LGP is usually made by injection molding process, and it has numerous optical micro patterns on the surface. In the present study the micro-patterned stamper which has cylindrical shape was fabricated by using the UV-LiGA process. And the replication characteristics have been compared among three different kinds of injection molding process; general injection molding, injection/compression molding and RHCM(Rapid Heating and Cooling Molding). Average replication ratios of CIM and ICM were 19.1% and 64.6%, respectively. On the other hand, the average replication ratio of RHCM process showed the higher value of 98.4% among these. It show that maintaining the mold surface above $T_g$ could increase the replication ratio of micro patterns substantially.

• Imaging Science in Dentistry
• /
• 제51권3호
• /
• pp.251-260
• /
• 2021

Purpose: Dental implants are widely used for the rehabilitation of edentulous sites. This study investigated the occurrence of dental implant malpositioning as shown on post-implantation cone-beam computed tomography (CBCT) and to identify related factors. Materials and Methods: Samples with at least 1 malpositioned dental implant were collected from a central radiology clinic in Tehran, Iran from January 2017 to January 2019. Variables such as demographic characteristics, length and diameter of implants, type of implant, sites of implant insertion, different types of implant malpositioning problems (cortical plate perforation, interference with anatomical structures), angulation of the implant, and the severity of malpositioning were assessed. In addition, the incidence of implant fracture and over-drilling was evaluated. Data were statistically analyzed using the chi-square test, 1-sample t-test, and Spearman correlation coefficients. Results: In total, 252 patients referred for implant postoperative CBCT evaluations were assessed. The cases of implant malpositioning included perforation of the buccal cortical plate (19.4%), perforation of the lingual cortical plate (14.3%), implant proximity to an adjacent implant (19.0%), implant proximity to an adjacent tooth (3.2%), interference with anatomical structures(maxillary sinus: 18.3%, mandibular canal: 11.1%, nasal cavity: 6.3%, mental foramen: 5.6%, and incisive canal: 0.4%). Implant fracture and over-drilling were found in 1.6% and 0.8% of cases, respectively. Severity was categorized as mild (9.5%), moderate (35.7%), severe (37.7%), and extreme (17.1%), and 52.4% of implants had inappropriate angulation. Conclusion: CBCT imaging is recommended for detecting dental implant malpositioning. The most common and severe type of malpositioning was buccal cortex perforation.

• 한국축산식품학회지
• /
• 제31권1호
• /
• pp.74-80
• /
• 2011

유화형 소시지에 제조 방법을 다르게 추출한 솔잎 추출물을 첨가하여 냉장온도($4{\pm}1^{\circ}C$)에서 30일간 저장하면서 pH, TBARS, 총 미생물수, 육색 및 아질산염 잔존량을 조사하였다. 시험구는 솔잎을 첨가하지 않은 대조구, 솔잎즙 첨가구는 T1, 솔잎 에탄올 추출물 첨가구는 T2, 솔잎중탕 추출물 첨가구를 T3 등 4개 처리구로 나누어 0, 10, 20 및 30일간 저장하면서 실험하였다. pH는 저장기간이 경과하면서 모든 처리구에서 서서히 감소하였다(p<0.05). TBARS와 총미생물수는 저장기간 동안 증가하였으며, 솔잎 즙과 에탄올 추출물을 첨가한 유화형 소시지는 대조구보다 낮아 솔잎의 첨가는 지방산화와 미생물 성장을 지연시켰고, 특히 에탄올 추출물 첨가구인 T2에서 TBARS 값과 미생물수는 가장 낮은 경향이었다(p<005). 육색은 저장기간이 지나면서 CIE $L^*$ 값과 $a^*$ 값 및 $b^*$ 값은 감소하였고, 처리구간에는 CIE $L^*$ 값과 $a^*$ 값은 T1과 T2에서 낮았고, $b^*$ 값은 T1과 T2에서 높은 결과로 솔잎 추출물의 첨가는 소시지 색을 어둡게 하는 경향이었다. 아질산염 잔존량은 저장기간이 경과하면서 감소하였는데 T2에서 다른 시험구보다 유의하게 감소하였다. 이상의 결과를 종합적으로 고찰해보면 솔잎 에탄올 추출물 첨가는 지방의 산화와 미생물 성장 억제 및 아질산염 잔존량 감소에 효과가 가장 있을 것으로 생각된다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권5호
• /
• pp.456-465
• /
• 2016

In order to optimize the performance of a Wells turbine with fixed guide vanes, the designs of an end plate and a ring on the tip of the turbine rotor are proposed as penetrating blade tip treatments. In this study, numerical investigations are made using computational fluid dynamics (CFD)-based ANSYS Fluent software, and validated by corresponding experimental data. The flow fields are analyzed and non-dimensional coefficients $C_A$, $C_T$ and ${\eta}$ are calculated under steady-state conditions. Numerical results show that the stalling phenomenon on a ring-type Wells turbine occurs at a flow coefficient of ${\phi}=0.36$, and its peak efficiency can reach 0.54, which is 16% higher than that of an unmodified turbine and 9% higher than in the case of an endplate-type turbine. In addition, quasi-steady analysis is used to calculate the mean efficiency and output work of a wave cycle under sinusoidal flow conditions. As a result, it has been found that the ring-type turbine is superior to other types of Wells turbines.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.374-377
• /
• 2008

High temperature deformation behavior and texture evolution during ECAP(equal channel angular pressing) of Zn-0.3Al alloy were investigated in this study. ECAP was conducted at temperatures from $40^{\circ}C$ to $160^{\circ}C$ on the plate type specimen of 5mm thickness and 20mm width. The specimens obtained by ECAP showed typical texture with basal poles tilted away from the ND toward ED. A series of compression tests was carried out at temperatures from RT to $200^{\circ}C$ under the strain rate from 0.03 to 10/s. With the strain rate increased, serration behavior was observed to be prominent.

• 멤브레인
• /
• 제15권2호
• /
• pp.114-120
• /
• 2005

본 연구의 목적은 도시 하수처리를 위한 막결합형 $A_2O$공정에 관해 실제적인 정보를 얻고자 하는 것이다. 공경 $0.25\;{\mu}m$의 평판형 정밀여과막을 공기가 주입되는 호기조에 침지시켜 처리수는 저압으로 여과된다. 인공폐수를 대상으로 최적의 처리수질과 장기운전의 안정성 확보를 위한 내부반송율과 MLSS 농도 등의 최적 운전인자를 산정하고자 하였다. 내부반송은 각각 호기조에서 무산조로 반송한 것을 type 1, 무산조에서 혐기조로 반송한 것을 type 2라고 규정지었다. 플럭스는 15 LMH, type 1을 2Q로 고정하고 실험하였을 때 최적의 운전 조건은 MLSS 농도는 11,000 mg/L, type 2가 IQ로 나타났다. 이때, BOD $COD_{cr}$, T-N, T-P의 제거율이 각각 $97.3\%,\;94.2\%,\;64.0\%,\;63.0\%$로 타 내부반송율보다 효과적이었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1200-1202
• /
• 1993

There are many methods to investigate the physical properties of monolayers formed at the air-water interface. Among them, the displacement current method is appropriate for the investigation of the dynamic behavior of monolayers. The measuring system of displacement current method was constructed at home-made Kuhn type LB deposition apparatus using aluminium plate electrode. The currents induced by the dynamic motion of molecules were measured when the molecules were pressed by barrier. To verify the measuring system, we used 4-octyl -4'-(5-carboxy-pentamethyleneoxy)-azobenzene molecules which has two remarkable variations of surface pressure of monolayer at the air-water interface. We can detect the two peaks of displacement currents which shows that the orientations of molecules are changed greatly at the state of these two remarkable changes of surface pressure.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권2호
• /
• pp.21-24
• /
• 2010

This paper deals with numerical analysis on a high-$T_c$ superconducting (HTS) electrodynamic suspension (EDS) simulator according to the variation of the ground conductor conditions. Because the levitation force of EDS system is formed by the magnetic reaction between moving magnets and fixed ground conductors, the distribution of the magnetic flux on a ground conductor plays an important role in the determining of the levitation force level. The possible way to analyze HTS EDS system was implemented with 3D finite element method (FEM) tool. A plate type ground conductor generated stronger levitation force than ring type ground conductor. Although the outer diameter of Ring3 (335 mm) was larger than that of Ring2 (235 mm), the levitation force by Ring2 was stronger than that by Ring3. Considering the results of this paper, it is recommended that the magnetic flux distribution according to the levitation height and magnet current should be taken into account in the design of the ground conductors.

• 한국항공우주학회지
• /
• 제31권9호
• /
• pp.26-31
• /
• 2003

노후 항공기는 일반적으로 다중손상(MSD)이라고 하는 폭넓게 분포된 피로손상을 내포하고 있다. 2024-T3 알루미늄합금과 같은 연성재료에 있어서 다중손상은 전통적인 파괴역학에서 예측할 수 있는 것보다 낮은 운용수명을 예측하게 만드는 것으로 알려져 있다. 본 논문에서는 다중손상을 갖는 평판 구조물을 모델링한 Fastener Hole을 갖는 2024-T3 알루미늄합금 판재로 제작된 Hole/Slot type M(T) 시편에 예입압입을 적용한 후 피로시험을 수행하여 피로균열 성장지연에 의한 운용수명 증가에 대한 효과를 연구하였다. 예비압입을 적용한 시편은 파단에 이르는 사이클수가 최소 10배에서 최대 40배까지 증가하였으며, 일정진폭 하중의 최대값을 증가시킴에 따라서 그 효과가 감소함을 보여주었다. 또한, 압입에 의한 균열성장지연 메커니즘은 균열진전경로가 압입자국에 들어서면서 균열성장률이 감소하기 시작하며 압입자국의 중심을 지나면서 최소균열성장률 상태로 일정한 시간동안 균열성장이 정체됨으로써 피로수명이 연장됨을 밝혔다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권3호
• /
• pp.348-363
• /
• 2013

The use of I-Core sandwich panel has increased in cruise ship deck structure since it can provide similar bending strength with conventional stiffened plate while keeping lighter weight and lower web height. However, due to its thin plate thickness, i.e. about 4~6 mm at most, it is assembled by high power $CO_2$ laser welding to minimize the welding deformation. This research proposes a volumetric heat source model for T-joint of the I-Core sandwich panel and a method to use shell element model for a thermal elasto-plastic analysis to predict welding deformation. This paper, Part I, focuses on the heat source model. A circular cone type heat source model is newly suggested in heat transfer analysis to realize similar melting zone with that observed in experiment. An additional suggestion is made to consider negative defocus, which is commonly applied in T-joint laser welding since it can provide deeper penetration than zero defocus. The proposed heat source is also verified through 3D thermal elasto-plastic analysis to compare welding deformation with experimental results. A parametric study for different welding speeds, defocus values, and welding powers is performed to investigate the effect on the melting zone and welding deformation. In Part II, focuses on the proposed method to employ shell element model to predict welding deformation in thermal elasto-plastic analysis instead of solid element model.