• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.173-177
• /
• 2008

We have developed the transparent passivation layer for top emission organic light emitting diodes using CsCl thin film by the thermal evaporation method. The CsCl film was deposited on the Ca/Ag semitransparent cathode. The optical transmittance of Ca/ Ag/CsCl triple layer is higher than that of Ca/Ag double layer in the visible range. The device with a structure of glass/Ni/2-TNATA/a-NPD/Alq3:C545T/BCP/Alq3/Ca/Ag/CsCl results in higher efficiency than the device without CsCl passivation layer. The device without CsCl thin film shows a current efficiency of 7 cd/A, whereas the device passivated with CsCl layer shows an efficiency of 10 cd/A. This increase of efficiency isresulted from the increased optical extraction by the CsCl passivation layer.

• 폴리머
• /
• 제24권4호
• /
• pp.520-528
• /
• 2000

본 연구는 고형분 70%인 하이솔리드 아크릴 수지 (BMHA)를 합성하여, 환경친화성 도료인 하이솔리드 아크릴/폴리이소시아네이트 도료(BNHS)에 적용하고 그의 도막특성을 살펴본 것에 그 의의가 있다. BMHA는 새로운 형의 단량체로서 acetoacetoxyethyl methacrylate (AAEM)을 도입하고 여기에 n-butyl acrylate, methyl methacrylate 및 2-hydroxyethyl acrylate를 4원공중합시켜 얻었다. BMHA 합성에 있어서 T$_{g}$ 값이 낮을수록, AAEM의 양이 많을수록 각각 높은 전환율을 나타내었고, T$_{g}$값 고정하의 OH 값 변화에 따른 전환율은 큰 차이가 없었다. BMHA와 폴리이소시아네이트를 상온경화시켜 하이솔리드 BNHS 도료를 제조하고서 자동차 상도용 도료로서의 적합성 여부를 알아보기 위하여 도막물성 시험을 한 결과, BNHS내에 AAEM 도입 전후의 도막물성 비교시험에서 AAEM 도입후에 내마모성과 내용제성이 향상됨으로써 자동차 상도용 도료로서의 응용가능성을 보여주었다.다.

• 한국음향학회지
• /
• 제21권7호
• /
• pp.624-631
• /
• 2002

방음벽의 상단부 형상에 따른 삽입손실을 무향실에서 모형축척 방법으로 측정하고 상호 비교하였다. 높이 0.3m의 수직형 방음벽에 대한 삽입손실과 간단한 형상물을 상단부에 설치한 방음벽의 삽입손실과의 차를 비교하였다. 실험결과 단순히 높이를 증가시키는 경우보다 상단부에 간단한 형상을 설치한 것이 더 효과적이었다. 'T'형, 'Y'형 및 '(equation omitted)'형 방음벽에 대한 삽입손실을 비교한 결과 'T'형과 '(equation omitted)'형 방음벽은 비슷하였으며 'Y'형이 가장 좋은 효과를 나타냈다. 본 연구결과는 Alfredson(PIOC. Inter-Noise 95, p. 381, 1995)등의 결과와는 잘 일치하지만 May (J. Sound Vib. 71, p. 73, 1980) 등의 결과와는 상충된다. 따라서 어떤 형태가 가장 좋은지를 결정하는 것은 어렵다. 왜 이러한 상호 모순되는 결과를 얻게 되는가를 알기 위해 경계요소법을 적용한 결과 각 연구자들마다 다른 방음벽의 높이, 음원과 수음점의 위치, 높이와 거리를 서로 다른 실험조건을 가정했기 때문임을 알 수 있었다.

• Steel and Composite Structures
• /
• 제19권6호
• /
• pp.1403-1419
• /
• 2015

When precast concrete infill panels are connected to steel frames at discrete locations, interaction at the structural interface is neither complete nor absent. The contribution of precast concrete infill panels to the lateral stiffness and strength of steel frames can be significant depending on the quality, quantity and location of the discrete interface connections. This paper presents preliminary experimental and finite element results of an investigation into the composite behaviour of a square steel frame with a precast concrete infill panel subject to lateral loading. The panel is connected at the corners to the ends of the top and bottom beams. The Frame-to-Panel-Connection, FPC4 between steel beam and concrete panel consists of two parts. A T-section with five achor bars welded to the top of the flange is cast in at the panel corner at a forty five degree angle. The triangularly shaped web of the T-section is reinforced against local buckling with a stiffener plate. The second part consists of a triangular gusset plate which is welded to the beam flange. Two bolts acting in shear connect the gusset plate to the web of the T-section. This way the connection can act in tension or compression. Experimental pull-out tests on individual connections allowed their load deflection characteristics to be established. A full scale experiment was performed on a one-storey one-bay 3 by 3 m infilled frame structure which was horizontally loaded at the top. With the characteristics of the frame-to-panel connections obtained from the experiments on individual connections, finite element analyses were performed on the infilled frame structures taking geometric and material non-linear behaviour of the structural components into account. The finite element model yields reasonably accurate results. This allows the model to be used for further parametric studies.

• Journal of information and communication convergence engineering
• /
• 제14권1호
• /
• pp.40-44
• /
• 2016

The device coupling between the stacked top/bottom field-effect transistors (FETs) in two types of monolithic 3D inverter (M3INV) with/without a metal layer in the bottom tier is investigated, and then the regime of the thickness T_ILD and dielectric constant ε_r of the inter-layer distance (ILD), the doping concentration N_d (N_a), and length L_g of the channel, and the side-wall length L_SW where the stacked FETs are coupled are studied. When N_d (N_a) < 10¹⁶ cm^-3 and L_SW < 20 nm, the threshold voltage shift of the top FET varies almost constantly by the gate voltage of the bottom FET, but when N_d (N_a) > 10¹⁶ cm^-3 or L_SW > 20 nm, the shift decreases and increases, respectively. M3INVs with T_ILD ≥ 50 nm and ε_r ≤ 3.9 can neglect the interaction between the stacked FETs, but when T_ILD or ε_r do not meet the above conditions, the interaction must be taken into consideration.

• 한국유기농업학회지
• /
• 제12권4호
• /
• pp.437-450
• /
• 2004

This study was conducted with two objectives ; one was to select the suitable soybean cultivars for cultivation in paddy field and the other was to establish the environment-friendly rotational cropping system of soybean instead of rice in paddy field. In order to evaluate growth adaptation and yields, Eve soybean cultivars were cultivated in Yeoncheon, Keonggi province, with two cultivation methods such as level row and high ridge. Growth of the top plants, such as stem length, number of branches, diameter of stem, were higher in high ridge than in level row, however, the differences among the cultivars were bigger than those between the cultivation methods. Dry weight of top plant was significantly different among the cultivars during whole growth stages, however, it was higher in level row than in high ridge at V5 stage while it became higher in high ridge as growth progressed. Roots were more developed in high ridge than in level row during whole growth stages. T/R ratio in level row was higher than that in high ridge. During whole growth stages, significant differences were observed among the cultivars in growth and yields in each cultivation method and yields of Eunhakong was the highest. In results, number of nodules and T/R ratio at V5 stage, number of pods at R2 stage, and number of seeds and T/R ratio at R5 stage had highly correlated with yields, respectively.

• 한국소음진동공학회논문집
• /
• 제18권1호
• /
• pp.94-100
• /
• 2008

Noise barriers are being used more often to solve problems of noise pollution from traffic noise. Several types of noise barriers are being installed to increase the cost-effectiveness of noise barrier installation. In this study, the insertion loss is analyzed to evaluate the effectiveness of the noise barrier by using the BEM. In order to check the validity of the BEM, the BEM and Lam's theoretical analysis are compared with measurement, which is performed in the anechoic chamber for the 1/10 scale-down model, and good agreements are obtained. By using the two dimensional boundary element method, the insertion loss is calculated and analyzed for several typical noise barriers such as the vertical barrier, the barrier with an oblique edge on top, the T-shaped barrier and the barrier with interference device on top. With these analyses, it is possible to design more cost-effective noise barriers appropriate for a particular area.

• 생약학회지
• /
• 제34권1호통권132호
• /
• pp.40-44
• /
• 2003

Antler has been used as one of the important traditional oriental medicines for many years. It contains many biochemical components including lipids, peptides, carbohydrates, and inorganic substances. The various biological activities of antler are being considered owing to such biochemical components. The purpose of this research is to compare the biochemical components of antlers after treatment of three different kinds of fodder. They are mulberry (group A), Lycii Fructus (group B) and the complex of herbs (group C). The chemical composition of each antler was determined in three sections (top, middle, and bottom) and compared with those of the control. The contents of sialic acid, uronic acid and glycosaminoglycans increased in the top antlers of the group B. Total lipids content increased in the top antlers of all groups (A, B, and C). The concentration of inorganic ions (Ca, Mg, and P) decreased in all groups. Fattyacid composition was also analyzed by GC-MS and expressed as percentage of total fatty acid concentration. The content of palmitic acid decreased in all groups. The content of 2-hydrox-yhexadecanoic acid, which has not been reported in aster, increased in the top antlers of all groups. These results suggest that the treatment of special fodder may affect the composition of the biochemical components of antlers.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권12호
• /
• pp.553-558
• /
• 2003

The A S $r_{0.7}$B $i_{2.6}$T $a_2$ $O_{9}$ (SBT)thin films are deposited on Pt-coated electrode(Pt/$TiO_2$/$SiO_2$/Si) using a RF magnetron sputtering method. The electrical properties of SBT capacitors with top electrodes were studied. In the XRD pattern, the SBT thin films in all annealing temperatures had (105) orientation. In the SEM images, Bi-layered perovskite phase was crystallized at 75$0^{\circ}C$ and grains largely grew in oxygen annealing atmosphere. The electrical properties of SBT capacitor with top electrodes represent a favorable properties in Pt electrode. The maximum remanent polarization and the coercive electric field with Pt electrode are 12.40C/$\textrm{cm}^2$ and 30kV/cm, respectively. The dielectric constant and leakage current density with Pt electrode is 340 and 6.8110$^{-10}$ A/$\textrm{cm}^2$, respectively.y.y.

• Journal of Information Science Theory and Practice
• /
• 제2권1호
• /
• pp.48-61
• /
• 2014

Using statistic and bibliometric methods to characterize scientific cooperation between China (excluding Hong Kong, Macao, and Taiwan) and South Korea through their bilateral co-authored papers covered by the Science Citation Index CD-ROM, 1991-2010, in our paper we exploit the feature of their cooperation in four levels: time sequence, academic community, key fields, and institution distribution. From the time sequence we know that collaboration between China and Korea starts in 1991, reaching the first peak during 2004-2007. As for the academic community, the number of Chinese corresponding authors (2414) is slightly lower than that of Korea (2700). Regarding the 27 high yield authors, there are only 4 coming from China. Korea has a higher active level than Chinese authors. China and Korea tend to cooperate with each other on strong disciplines such as physics, chemistry, material science, engineering, mathematics, pharmaceutical, computer science and biology. Furthermore, they also attach great importance to basic research and high-tech cooperation. Besides, Chinese Academy of Sciences ranks at the top 1 among the distribution of institutions. As a majority of the collaborative institutions are universities, the participation of non-university institutions is relatively low. There are 7 Korean universities among the top ten institutions, while Yanbian University and Tsinghua University in China rank respectively as third and fourth. Seoul National University, accompanied by Korea University and Yonsei University as the three top Korean universities, is also among the top among the cooperating institutions.