• Journal of Korean society of Dental Hygiene
• /
• v.2 no.2
• /
• pp.145-158
• /
• 2002

This is a section study for research of main cause and coping ways caused by stresses during the clinical experiment. It was researched by 231 students of third grade have finished clinical experiment until September though questionnaire. The methods for this study used the a stress measuring instrument thai was used by Hoa-Yun Jun and coping ways of stresses devised by Bell. We computed the frequency and the mean value by the SPSS 10.0 statistical data and we got the following result that from the experiment with t-test and the ANOVA analysis. 1. The mean value of stresses indicated rather higher states in figures 2,855 and the figures that were classified by each areas, indicated highest figures are affected by circumstances, that is 3.065. 2. As higher as the degree of satisfactions in their major, students feel stress less so, the result was not quite different between each of them (p=0.007). 3. The copping ways of stresses indicated, similar differences by using of long-term copping ways and short-term copping ways to cope with stresses(p=0.000). 4. In case of the students who failed college entrance exams and prepared for the next chance for more than one year, indicated highest figures that is 2.57 in short-term ways to cope with stresses, so it showed slightly differences between them(p=0.014). 5. According to the satisfactions of clinical experiments, there were not any statistical differences in long-term coping ways but, as smaller as the satisfactions, in that evidence of the students use short-term copping ways, it showed slightly differences between them(p=0.041). 6. According to the degree of stresses, low-stress groups use short-term coping ways more than high-stress groups, so it showed slightly differences between them(p=0.001). 7. As far as the using of long-term coping ways, the figures of between the lower stress groups and the higher stress groups indicated 2.89 and 2.97 respectably so, the figures were not so closed.

• Journal of Animal Science and Technology
• /
• v.45 no.5
• /
• pp.841-846
• /
• 2003

Landrace(L), Largewhite(Lw), Korean Native Pig(KNP) and commercial hybrid were experimented to determine holothane sensitivity, RYR gene mutation and quality profiles. In the results of halothane test, the incidence of halothane positive pigs was similar between L and Lw. But, the rate of dubious halothane positive type was higher in L than Lw. In hal-gene analysis, halothane-positive pigs(nn) were not found in any tested breed and heterotype(Nn) appeared only in one pig of L. Of the breed effect on the quality profiles, there were no differences in pH$_1$(pH at 1hr postslaughter), but pH$_{u}$(pH at 24hr postslaughter) was significantly higher in commercial hybrid and KNP than other breeds(p〈0.05). Color assessed by National Pork Producers Council(NPPC) and CIE L$^{*}$ was significantly paler in L breed than other breeds(p〈0.05). Significant differences were found in water holding capacity(WHC) and cooking loss in KNP(p〈0.05).

• Korean Journal of Acupuncture
• /
• v.28 no.4
• /
• pp.1-15
• /
• 2011

Objectives : The purpose of this study is to evaluate the feasibility of massive clinical research and to make a basic analysis on the effectiveness and safety of moxibustion treatment on knee osteoarthritis compared to usual care. Methods and Results : This study is a protocol for a pilot randomized controlled trial. Forty participants are assigned to the moxibustion group (n=20) and usual care group (n=20). Participants assigned to the moxibustion group receive moxibustion treatment on the affected knee(s) at six standard acupuncture points (ST36, ST35, ST34, SP9, Ex-LE04 and SP10) three times per week for four weeks (total of 12 sessions). Participants in the usual care group don't receive moxibustion treatment during the study period and follow-up are made on the 5th, 9th and 13th weeks after random allocation. Both groups are allowed to use any kind of treatment, including surgery, conventional medication, physical treatment, acupuncture, herbal medicine, over-the-counter drugs and other active treatments. Education material that explains knee osteoarthritis and current management options and self-exercise is provided for each group. The pain scale of the Korean Western Ontario and McMaster Universities Questionnaire (K-WOMAC) is the primary outcome measurement used in this study. Other subscales of the K-WOMAC, the Short-Form 36 Health Survey (SF-36), Beck Depression Inventory (BDI), Physical Function test, Patient Global Assessment, and Pain Numeric Rating Scale (NRS) are used as outcome variables to evaluate the effectiveness of acupuncture. Safety is assessed at every visit. Conclusions : The result of this trial will provide a basis for the effectiveness and safety of acupuncture treatment for knee osteoarthritis.

• The Journal of the Korea Contents Association
• /
• v.11 no.5
• /
• pp.449-465
• /
• 2011

The purpose was to contribute substantially in terms of marketing strategic planning and implementation of coffee shops. Additionally, the target was set as the favorite coffee shops on the basis of the young people. Through the IPA Matrix, subdividion variable was derived and by using the variables in each quadrant, tested the variables that have significant effect on satisfaction, reuse, and recommendation intentions. The study results showed that there was a significant difference in the importance performance (IPA) difference analysis of coffee shop service quality elements and this proved that empirically, the expectations were different. Additionally, it was evident that there were statistically significant and not statistically significant elements in the relationship between service quality element and the overall satisfaction rate in each elements shown in the IPA. Through this, it was possible to provide the information on what service quality elements to focus and distribute. It was possible to understand that the ultimate goal should be satisfaction since the overall satisfaction positively affects the reuse and intention of recommendation and it was possible to re-confirm the previous studies which stated that overall satisfaction, reuse, and recommendation intentions have a positive influence.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.8
• /
• pp.5-19
• /
• 2012

Vertical drains along with the preloading technique have been commonly used to enhance the consolidation rate of dredged placement formation. In practice, vertical drains are usually installed in the process of self-weight consolidation of a dredged soil deposit because this process takes considerable time to be completed, which makes conventional analytical or numerical models difficult to quantify the consolidation behavior. In this paper, we propose a governing partial differential equation and develop a numerical model for 2-D axisymmetric non-linear finite strain consolidation considering self-weight consolidation to predict the behavior of a vertical drain in the dredged placement foundation which is installed during the self-weight consolidation. In order to verify the developed model in this paper, results of the numerical analysis are compared with that of the lab-scaled self-weight consolidation test. In addition, the model verification has been carried out by comparing with the simplified method. The comparisons show that the developed model can properly simulate the consolidation of the dredged placement formation with the vertical drains installed during the self-weight consolidation. Finally, the effect of construction schedule of vertical drains and of pre-loading during the self-weight consolidation is examined by simulating an imaginary dredged material placement site with a thickness of 10 m and 20 m, respectively. This simulation infers the applicability of the proposed method in this research for designing a soil improvement in a soft dredged deposit when vertical drains and pre-loading are implemented before the self-weight consolidation ceases.

• Journal of Families and Better Life
• /
• v.33 no.3
• /
• pp.15-29
• /
• 2015

The purpose of this study was to explore ethnic socialization enacted by Japanese marriage migrant women currently raising 7- to 18-year-old children in Korea. To accomplish this goal, we examined the following research questions: (1) What is the level of ethnic socialization enacted by Japanese marriage migrant mothers? (2) Does the level of ethnic socialization vary by demographic and ethnocultural factors? (3) To what extent do demographic and ethnocultural factors influence the enactment of ethnic socialization by Japanese marriage migrant mothers? The sample consisted of 243 Japanese marriage migrant women currently raising 7- to 18-year-old children in Korea. For data analysis, T-test, correlation, ANOVA, and hierarchical regression analyses were used. Also, we performed separate analyses for two subtypes of ethnic socialization in particular, namely cultural socialization and preparation for bias. Ethnocultural factors examined in this study were the level of discrimination experience, Japanese ethnic identity, and husbands' ethnic orientation in childrearing. The main results of this study were as follows. First, results showed that Japanese marriage migrant women enacted moderate levels of cultural socialization and preparation for bias. Second, Japanese marriage migrant women's cultural socialization and preparation for bias were both positively related to the levels of women's discrimination experience and Japanese ethnic identity. Also, the younger the age of the firstborn child, the more preparation for bias these women performed. In addition, women whose Korean husbands wanted to raise their children more biculturally performed more cultural socialization compared to those with Korean husbands who wanted to raise their children as Korean. Third, hierarchical regression analyses revealed that women's discrimination experience and ethnic identity positively predicted both types of ethnic socialization. Also, Korean husband's bicultural orientation towards childrearing predicted a higher level of cultural socialization by Japanese marriage migrant women. Results of this study provide basic information about ethnic socialization among multicultural families in Korea, which can be useful for promoting positive self-identity among multicultural children. Furthermore, the results suggest that husbands' support and cooperation in ethnic socialization can be crucial for marriage migrant women to socialize their children utilizing their cultural and experiential resources.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.5
• /
• pp.428-434
• /
• 2001

After miniplate fixation of mandibular angle fractures, fracture line stability during functional loading was evaluated. Using panoramic radiographs, 15 mandibular angle fracture patients who were treated by open reduction and one miniplate fixation along the external oblique ridge, were evaluated at postoperative 1, 4 and 8 weeks. At each time, 2 radiographs were taken: one taken during maximum biting of hardened silicone sheet on the affected side molar area and the other on the non-affected side. The distraction gap of inferior border of mandible at each time and each side was measured and these data were analysed statistically with clinical findings. The differences of inferior border distraction gap during hardened silicone sheet biting on the affected side molar area and on the non-affected side molar area at 4 week radiographs were smaller than those of 1 week's except one case. At 8 week's radiographs, the fracture lines were so stabilized that it was almost impossible to find the gap differences except one case and there were increased radiopacity along the entire fracture lines. Clinically, bony union was confirmed in all cases during plate removal performed at postoperative 6 month. By statistical analysis(paired t-test), the inferior border distraction gap during biting of hardened silicone sheet on the affected side was significantly reduced during 1 and 4 week interval(p<0.01). The differences of inferior border distraction gap during biting on the affected side molar area and on the non-affected side molar area were also significantly reduced at 1 and 4 week interval(p<0.01). But the inferior border distraction(compression) gap during non-affected side biting was not significantly changed. From these findings, it could be concluded that fracture line stability during functional loading after one miniplate fixation of mandibular angle fractures stems mainly from reduction of inferior border distraction gap during affected side biting on time interval. According to these radiographic and clinical findings, the clinical superiority of one miniplate fixation technique in mandibular angle fracture treatment could be confirmed.

• Imaging Science in Dentistry
• /
• v.50 no.3
• /
• pp.227-236
• /
• 2020

Purpose: Image artifacts caused by patient motion cause problems in cone-beam computed tomography (CBCT) because they lead to distortion of the 3-dimensional reconstruction. This prospective study was performed to quantify patient movement during CBCT acquisition and its influence on image quality. Materials and Methods: In total, 412 patients receiving CBCT imaging were equipped with a wireless head sensor system that detected inertial, gyroscopic, and magnetometric movements with 6 dimensions of freedom. The type and amplitude of movements during CBCT acquisition were evaluated and image quality was rated in 7 different anatomical regions of interest. For continuous variables, significance was calculated using the Student t-test. A linear regression model was applied to identify associations of the type and extent of motion with image quality scores. Kappa statistics were used to assess intra- and inter-rater agreement. Chi-square testing was used to analyze the impact of age and sex on head movement. Results: All CBCT images were acquired in a 10-month period. In 24% of the investigations, movement was recorded (acceleration: >0.10 [m/s²]; angular velocity: >0.018 [°/s]). In all examined regions of interest, head motion during CBCT acquisition resulted in significant impairment of image quality (P<0.001). Movement in the horizontal and vertical axes was most relevant for image quality (R²>0.7). Conclusion: Relevant head motions during CBCT imaging were frequently detected, leading to image quality loss and potentially impairing diagnosis and therapy planning. The presented data illustrate the need for digital correction algorithms and hardware to minimize motion artefacts in CBCT imaging.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.1
• /
• pp.1-7
• /
• 2014

PURPOSE. The accuracy of a gypsum model (GM), which was taken using a conventional silicone impression technique, was compared with that of a polyurethane model (PM), which was taken using an iTero$^{TM}$ digital impression system. MATERIALS AND METHODS. The maxillary first molar artificial tooth was selected as the reference tooth. The GMs were fabricated through a silicone impression of a reference tooth, and PMs were fabricated by a digital impression (n=9, in each group). The reference tooth and experimental models were scanned using a 3 shape convince$^{TM}$ scan system. Each GM and PM image was superimposed on the registered reference model (RM) and 2D images were obtained. The discrepancies of the points registered on the superimposed images were measured and defined as GM-RM group and PM-RM group. Statistical analysis was performed using a Student's T-test (${\alpha}=0.05$). RESULTS. A comparison of the absolute value of the discrepancy revealed a significant difference between the two groups only at the occlusal surface. The GM group showed a smaller mean discrepancy than the PM group. Significant differences in the GM-RM group and PM-RM group were observed in the margins (point a and f), mesial mid-axial wall (point b) and occlusal surfaces (point c and d). CONCLUSION. Under the conditions examined, the digitally fabricated polyurethane model showed a tendency for a reduced size in the margin than the reference tooth. The conventional gypsum model showed a smaller discrepancy on the occlusal surface than the polyurethane model.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.2
• /
• pp.157-168
• /
• 2010

Many athletes have been using occlusal stabilization appliances to improve their performance. Few studies have examined the benefits of such an appliance in golf. We determined the effect of such appliances on the masticatory muscle activities and driving distances of professional golf players. The appliances were customized for each player and adjusted using a computerized device. The electromyographic muscle activities and driving distances with and without the appliance were measured and compared using the K7 Analyzer and the GolfAchiever II assembly. A paired t-test was used for statistical analysis. The muscle activities of the temporo-frontal and masseter muscles with the appliance were significantly more stable than those without the appliance, and the driving distances with the appliance were significantly different from those without it. Although there were intra-individual differences, professional golf players with temporomandibular disorders showed a greater improvement in performance.