• 제목/요약/키워드: T-section

검색결과 1,196건 처리시간 0.031초

홍수 규모별 대청호에 유입하는 하천 밀도류의 특성 변화 (Variation of Inflow Density Currents with Different Flood Magnitude in Daecheong Reservoir)

  • 윤성완;정세웅;최정규
    • 한국수자원학회논문집
    • /
    • 제41권12호
    • /
    • pp.1219-1230
    • /
    • 2008
  • 여름철 홍수시 성층화된 저수지로 유입하는 하천수는 저수지 표층수에 비해 낮은 수온과 높은 부유고형물질(SS) 농도를 가지므로 주변수에 비해 상대적으로 높은 밀도를 가지게 된다. 이러한 밀도차로 인해 형성된 밀도류의 저수지 내 진행과정은 수질과 수생태계에 큰 영향을 주게 된다. 따라서 하천수 밀도류의 거동분석은 저수지 수질관리를 위한 현장조사의 최적화, SS와 영양염류 등 오염물질의 이송 확산 해석에 중요한 요소이다. 본 연구의 목적은 기존 연구를 통해 검증된 2차원 수치모델을 이용하여 다양한 홍수규모에서 대청호로 유입하는 하천 밀도류의 거동 특성인 침강점 수심($d_p$)과 거리($X_p$), 분리점 수심($d_s$), 중층류 관입두께($h_i$), 댐축 도달시간($t_a$), 감소율(${\beta}$)을 분석함으로써 저수지 수질관리를 위한 기초정보를 제공하는데 있다. 모의조건은 평수년이었던 2004년 6월 13일부터 7월 3일 동안 발생한 홍수사상의 수문곡선을 기준으로 유입 유량의 규모를 10개의 등급으로 나누었으며, 초기 성층조건은 탁수가 유입되기 전의 발달된 성층구조를 적용하였다. 유입수와 저수지 성층구조의 특성치는 밀도 Froude 수(Fri)로 나타내었으며, 10개의 $Fr_i$ 조건별로 $d_p,\;X_p,\;d_s,\;h_i,\;t_a$, SS의 ${\beta}$값 등을 산정하였다. 연구결과 $d_p,\;X_p,\;d_s,\;h_i$는 대체로 $Fr_i$ 값과 비례하여 증가하였으며 중층류의 진행속도도 빨라지는 경향을 나타내었으나, 저수지 지형변화에 큰 영향을 받는 것으로 나타났다. 정상상태를 가정하는 Hebbert 식은 저수지 수위변화와 지형변화를 고려하지 못하기 때문에 수치모델 보다 $d_p$값을 과대 산정하였다. 유입 SS 농도의 감소율(${\beta}$)은 $Fr_i$가 클수록 작아지는 경향을 보였으나, $Fr_i$>9.0에서는 난류혼합효과 때문에 다시 증가하였다. 연구결과는 저수지운영 실무자들이 홍수규모별로 탁수의 초기 거동특성을 간단히 예측하는 목적으로 사용할 수 있다.

소구치 발거를 통한 교정치료가 한국어 자음의 발음에 미치는 영향 (THE EFFECT OF ORTHODONTIC TREATMENT BY PREMOLAR EXTRACTION ON THE PRONUNCIATION OF THE KOREAN CONSONATS)

  • 이정희;윤영주;김광연
    • 대한치과교정학회지
    • /
    • 제27권1호
    • /
    • pp.91-103
    • /
    • 1997
  • 교정치료가 발음에 어떠한 영향을 미치는가에 대해 연구하기 위해 구강용적의 감소를 초래하는 4개의 소구치를 발거하고 교정치료를 끝낸 환자와 대조군을 대상으로 한국어 자음에 대하여 자음의 지속시간과 파형의 형태를 비교 분석한 결과 다음과 같은 결론을 얻었다. 1. 자음의 지속시간에 있어서 CV형의 "ㅅ"과 "ㅌ"을 제외한 모든 어음에서 치료군의 자음 지속시간이 길었고, 특히 CV형에서의 "ㅈ"과"ㅆ"르리고 VCV형에서 "ㄷ"에서는 현저한 자음지속시간의 차이를 보였다. 2. VCV형에 있어서 두드러진 차이를 보이는 것은 "ㅉ"과 "ㅆ", "ㅊ"이였는데 "ㅉ"에 있어서는 파형의 형태가 치료군에서 더 강하고 특히 후속모음으로 이행구간에는 더 두드러졌으며, "ㅆ"에서는 선행모음에서 자음으로 이행시 치료군에서는 자음의 성분이 뚜렷하게 연속해서 나타나나, 대조군에서는 자음의 시작점이 불분명하고, 자음의 지속시간 또한 치료군에서 더 길었으며, 파형 자체의 영교차점도 치료군에서 더 빈번하였다. "ㅊ"에 있어서는 파형의 형태에 있어 유기음의 성분은 치료군에서 더 두드러졌으며, 파형의 형태 또한 강하게 나타났다. 3. 파형의 형태 비교에서는 CV형에서 "ㄷ", "ㅈ"의 발음시 치료군에서는 "ㅌ", "ㅈ" 같은 유기음에서 볼수 있는 기류의 흐름이 나타났다. 4. 유기음의 "ㅌ"와 "ㅊ"에서는 대조군보다 치료군에서 기류의 흐름이 많았으며 파형의 형태 또한 강하게 나타났다.

  • PDF

Sensory Information Processing

  • Yoshimoto, Chiyoshi
    • 대한의용생체공학회:의공학회지
    • /
    • 제6권2호
    • /
    • pp.1-8
    • /
    • 1985
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

  • PDF

High Resolution HC$_3$N Observations toward the Central Region of Sagittarius B2

  • H.S-Ching;Oh, M.ishi;M.Morimoto
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 1993년도 한국우주과학회보 제2권2호
    • /
    • pp.17-17
    • /
    • 1993
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

  • PDF

골프장 그린에서 토심별 토양 유기물 집적에 대한 미생물 분해성 평가 (Assessment of Microbial Decomposition in Soil Organic Matter Accumulation with Depth in Golf Greens)

  • 허근영;김인혜
    • 한국조경학회지
    • /
    • 제37권4호
    • /
    • pp.64-71
    • /
    • 2009
  • 집중적인 이용이 이루어지는 모래 기반의 잔디 근권부에 과도한 유기물의 집적은 잔디 생육에 심각한 장애를 일으킬 수 있다. 본 연구는 골프장 그린에서 유기물의 지속가능한 관리에 관한 연구의 일환으로서 조성 후 30년 경과한 그린에서 토심별 토양 유기물 분해를 평가하기 위해서 토양미생물 호흡량을 이용하여 토심별 토양 유기물 집적에 대한 미생물 분해를 평가하고 통기성 개선 및 돌로마이트 시용의 효과를 연구하였다. 조성 후 5년과 30년 경과한 그린의 토심 0~5cm, 5~10cm, 10~15cm 토양층에서 3반복으로 토양 시료를 채취하여 토양 유기물 함량을 분석하였다. 토양미생물 호흡량과 탈수소효소 활성이 조성 후 30년 경과한 그린에서 토심별 토양 유기물 분해를 평가하기 위해서 분석되었다. 그 후에 조성 후 30년 경과한 그린을 4개의 구획으로 구분하고 무처리한 대조구, 돌로마이트를 처리한 실험구, 토심 0~5cm 토양층을 제거한 실험구, 토심 0~5cm 토양층 제거 후 돌로마이트 처리한 실험구를 조성하였다. 처리 후 1, 2, 4주일 경과 후에 앞서 언급한 방법과 동일하게 토양 시료를 채취하여 토양 유기물 분해를 평가하기 위해서 토양미생물 호흡량을 분석하였다. 토심 0~5cm 토양층에서 토양 유기물 집적은 코어링과 같은 집약적인 관리에 의해서 조절되고 있지만 토심 5cm 이하에서는 유기물 함량이 시간 경과에 따라서 증가함으로 지속적으로 토양 환경이 악화되고 있다. 유기물에 대한 토양미생물의 분해는 토양 유기물 집적을 감소시키기 위해서 필수적이지만, 토심 5cm 이하에서 토양미생물 호흡량은 현저히 낮게 나타나고 통기성 개선과 돌로마이트 시용에 의해서 효과적으로 개선되지 않았다. 결과적으로 코어링과 같은 통기성 개선 작업들과 돌로마이트 시용은 조성 후 오랜 기간이 경과한 그린의 토심 5cm 이하에서 토양미생물 분해를 촉진시키기 위한 방법으로 효과적이지 못한 것으로 나타났다.

전문대학 간호과의 임상 실험 효율화를 위한 연구 (A Study on the Efficiency of Clinical Practice for Nursing Education in the Junior College of Nursing in Korea)

  • 이군자;김명순;양영희
    • 한국보건간호학회지
    • /
    • 제3권2호
    • /
    • pp.77-108
    • /
    • 1989
  • The purpose of this study was to find out the present condition of clinical practice and to develop a scheme on the efficiency of clinical practice for nursing education in junior college of nursing in korea. This study was conducted by 2 sections. Ist section was to find out the present condition of clinical practice to 42 directors of nursing collegd and data were collected July 8 to September 30, 1988. 2nd section wat to develop a scheme on the efficiency of clinical practice for nursing education and subjects were nursing professors 258: and clinical nurses 223 in 42 junior nursing colleges their clinical settings in korea. So total subjects were 481. Data were collected july 8, 1988 to June 30, 1988 and were analysed to get the mean, standand deviation, frequency, percentage, t-test, x-test used by SPSS - pc. Major findings were as follows: 1. The present condition of clinical education in junior college of nursing in Korea. 1) 32 colleges (76.2%) were managed by a-yeas system. 2) 25 colleges (59.5%) were performed by individual practice for each subject. 3) 4 weeks interval between class education and clinical education was a major type among total colleges(36.6%, J5 colleges) 4) 30 colleges (71.4%) provided clinical education for all subjects that should be practiced. Nursing administration wes not practiced in 5 colleges (41.9%) among the remainder(12 colleges). The main cause that all practice subjects were not practiced was the lack or absence of suitable clinical settings(8 colleges. 66.7%) 5) 18 colleges (42.9%) responded that a clinical educator was, subject-charged professor. 6) 12 colleges (29.3%) responded that a clinical instructor was in charge of 6~10 students. 7) The evaluation ration ratio(professor to head nurse) by each evaluator was mostly 50% to 50 % and 60% to 40%, respectively 11 colleges(27.5%) The most common evaluation methods were evaluation by head nures, report, presence, conference (11 colleges, 27.5%) 8) The field carrier of professor was mostly 2 years (79 persons, 20.7%) and mean was 3.2 years. The education carrier of a professor was mostly over than 6 years (261 persons, 66.4%) and mean was 9.2 years. The charge hours per-week of a professor were mostly 16-18 hours (16 persons, 131.8%) 9) 34 colleges (82.9%) approved that clinical practice hour was class hour and 18 colleges (43.9 %) counted that 2 hours of clinical education equaled 1 hour of class education. 2. A study 'on the efficiency of clinical practice for nursing education. L) general characteristics of subjects were as follows: kung-sang province (145 persons, 30.5%), 30-34 years (190 persons, 39.8%), graduated degree (245 persons, 51.5%), 6-10 years of carrier (199 persons, 41.4%) were the majority. 2) suitable clinical setting was responded the systematic ward with responsible clinical educator by 210 persons(43.8%) The response by working field of subjects showed a significant difference (p< 0.01) 3) 259 subjects (54.0%) responded that the desirable qualfication of clinical instructor was 3-5 years of clinical experience with master degree or higher. 4) The mean score of desirable quality degree of clinical instructor was 3.43 professors, score (3.54) was significantly higher than clinical nurses' (3.28) (p<0.01) 412 subjects (86.0%) responded that the insufficient guality of instructor was improved by continuing to seek more new information in reference. 5) 196 subjects (41.4%) responded that desirable qualification of head nurse was more than 2 years of head position among 5 years of clinical experience. The response by working' field of subjects showed a significant difference (p<0.05) 6) The mean score of desirable quality degree of head nurse was 3.18 Clinical nurses' score(3.38) was significantly higher than professors' (3.01) (p<0.01) 419 subjects (87.8%) responded that the insufficient of head nurse was improved by continuing relationship with instructor and being responsible from planing of clinical education. 7) The mean score of performance level of the desirable clinical education guide incollege was 2.91 Professors' score (2.96) was significantly higher than clinical nurses' (2.84) (p<0.01) 340 subjects (71.1%) responded that the possible resolution for poor performance was the more specified syllabus of clinical education and the satisfiable orientation for students. 8) The mean score of performance level of the desirable clinical education guide in hospital was 3.03 9) 141 subjects (29.6%) responded that the desirable clinical evaluator was the group of professor, head nurse, staff nurse. Response by working field of subjects was a significant difference (p< 0.05) 10) The mean score of performance level of the evaluation content needed in clinical education was 3.50 Clinical nurses' score (3.56) was significantly higher than professors' (3.45) (p<0.01) 11) 433 subjects (90.2%) responded that6 desirable evaluation method for clinical education was the presence. 12) The mean score of performance level about how personal difference among clinical educators was minimized was 2.89 and response by working field of subjects was not significant. The cause of poor performance was too much workload at clinical settings and too many students st colleges by 386 subjects (81.1%).

  • PDF

치과위생사와 치위생과 학생의 치과코디네이터 인식 비교 (A Comparative Study on Awareness the Dental Coordinator between Dental Hygienists and Dental Hygiene Students)

  • 박일순;이경희;윤혜정
    • 치위생과학회지
    • /
    • 제10권2호
    • /
    • pp.63-69
    • /
    • 2010
  • 임상치과위생사와 학생을 대상으로 치과코디네이터에 대한 인식 및 교육 후 맡고자 하는 업무분야와 수행해야 할 업무에 대한 의견을 조사하여 치과코디네이터 교육 이수자들을 위한 업무분야의 확장과 더 심화해서 다루어야 할 교육 분야에 대해 알아보고자 2007년 3월부터 2008년 6월까지 약 1년 4개월 동안 조사를 실시하여 수집된 자료를 통한 비교 분석으로 다음과 같은 결과를 얻었다. 1. 희망 취업조건을 조사한 결과, 희망 취업처의 경우 임상치과위생사는 치과병원 42.0%, 치과의원 28.4%, 학생은 치과병원 41.9%, 대학부속병원 및 종합병원 29.0% 순으로 나타났으며(p<0.001), 희망 근무지는 임상치과위생사와 학생 모두 서울이 각각 73.9%와 76.2%로 가장 많았다. 희망 소속부서의 경우 임상치과위생사는 진료지원팀이 33.0%로 가장 많았고, 학생은 진료팀이 41.9%로 가장 많았으며(p<0.05), 가장 선호하는 치과진료과목의 경우 임상치과위생사와 학생 모두 포괄진료가 각각 36.4%와 35.5%로 가장 많았다. 2. 치과코디네이터에 대한 인식을 살펴본 결과, 치과코디네이터에 대한 인식도는 임상치과위생사가 100%, 학생은 81.9%가 인식하는 것으로 응답하였으며 (p<0.001), 치과코디네이터 필요성에 대한 인식도는 학생이 94.8%로 85.2%의 임상치과위생사 보다 높게 나타났다(p<0.05). 치과코디네이터에 가장 적합한 직종에 대해서는 임상치과위생사의 65.9%, 학생의 84.5%가 치과위생사라고 응답하였다(p<0.01). 3. 치과코디네이터 교육이수자의 희망 직무분야의 결과, 희망 직명은 임상치과위생사는 상담실장이 34.1%로 가장 많았고, 학생은 실장(팀장)이 35.2%로 가장 많았으며, 가장 중요하다고 생각하는 직무 분야는 임상치과위생사와 학생 모두 상담이 각각 51.1%, 65.8%로 가장 많았다(p<0.05). 4. 치과코디네이터의 수행업무에 대한 인식은 임상치과위생사가 $4.00{\pm}0.41$로 학생의 $3.81{\pm}0.50$ 보다 높은 것으로 나타났다(p<0.01). 결론적으로 임상치과위생사나 학생 모두에게 희망 근무처에 따른 맞춤형 심화 교육이 필요하며 두 그룹 모두 상담과 업무 중재자로서의 기능을 최대한 발휘할 수 있는 교육 프로그램 개발과 재학여부나 임상경력을 고려한 지속적이며 체계적인 교육 프로그램 개발로 치과코디네이터의 계속적인 개발에 힘써야 할 것이다.

의생활 영역에 대한 중학생의 수업만족도 및 필요도에 관한 연구 (A Study on Middle School Students' Satisfaction and Need for Clothing section of Home Economics in the Textbook)

  • 강미향;오경화
    • 한국가정과교육학회지
    • /
    • 제18권2호
    • /
    • pp.63-77
    • /
    • 2006
  • 본 연구는 제7차 교육과정의 중학교 기술 가정 교과 중 의생활 단원을 세부영역으로 분류하여, 각 세부영역별 학습자의 수업만족도와 필요도를 조사하고, 교과서에 제시되어 있는 활동과제의 학습 유형 및 활용도를 조사하여 교과내용 개선을 위한 기초 자료를 제공하고자 하였다. 조사대상은 수도권 소재 중학교 3학년에 재학중인 남학생 169명과 여학생 336명으로 총 505명으로 하였다. 본 조사에서 수집된 자료는 SPSS 12.0 for Windows Program을 사용하여 분석하였다. 조사대상자들의 인구 통계적 특성과 활동과제의 활용도는 빈도와 백분율로 산출하였으며, 세부영역별 수업만족도와 교과내용의 필요도. 교과내용의 적절성과 교수방법, 교수매체의 활용, 활동과제를 하고 난 후의 느낌의 차이를 알아보기 위해서 기술통계 또는 t-test, 일원변량분석(one-way ANOVA)을 실시하였고, 일원변량분석(one-way ANOVA)의 사후검증을 위해서는 Duncan의 다중 범위 검증(Duncan's Multiple Range Test)을 실시하였다. 분석결과, 첫째, 기술 가정 교과서의 의생활 단원 세부영역별 수업만족도는 낮은 것으로 나타났다. 둘째, 세부영역에 따른 교과내용의 필요도는 의복재료 영역이 가장 낮은 필요도를 보였으며, 나머지 영역들은 보통 이상의 필요도를 보였다. 전체적으로 남학생보다 여학생이 교과내용에 대한 필요성을 더 느끼는 것으로 나타났다. 가사노동의 참여 여부에 따라서는 실생활에 적용가능한 부분에서 유의한 차이를 보였다. 셋째, 교과내용의 적절성에 관련하여 남 녀 모두 교과내용이 흥미롭지 않다고 응답하였으며, 의생활 단원의 실험 실습을 학생들이 어려워하고 있는 것으로 나타났다. 교수방법에 대해서는 '교과서를 읽어나가고 설명하는 방법에 의해 수업이 진행되었다'는 응답이 많아 앞으로 다양한 교수방법과 교수매체의 활용이 이루어져야 한다고 생각된다. 넷째, 교과서의 활동과제 활용도는 낮은 것으로 나타났으며, 발견탐구 학습이 가장 많이 활용한 것으로 나타났으며 협동학습은 전혀 활용하지 않은 것으로 나타났다. 영역별로 활용한 활동과제의 유형은 옷차림 영역의 활용도가 가장 활용도가 높았으며, 의복구성의 활동과제 활용도가 제일 낮게 나타났다.

  • PDF

불광천 자연형 하천 정비구간의 생태적 특성 변화 비교 연구 (A Study on Comparison of Changes in Ecological Characteristics for Bulgwangcheon(stream) Close-to Nature Section)

  • 박원제;이경재;한봉호;장재훈
    • 한국조경학회지
    • /
    • 제40권2호
    • /
    • pp.112-129
    • /
    • 2012
  • 본 연구는 2002년 완공된 불광천(佛光川)자연형 하천 정비구간 생태적 특성변화를 비교하여 향후 하천관리의 기초자료 제공을 목적으로 불광천 자연형 정비사업에 대한 문헌연구, 정비사업 전 후와 현재의 물리적 환경변화 조사 분석과 생태계변화 분석을 주요내용으로 하였다. 준공 이후 호안에 적용된 공법을 중심으로 훼손현황을 분석한 결과, 수충부(水衝部)지역, 강우시 유출수가 발생하는 지점을 중심으로 호안이 유실되고 식생이 훼손되었다. 현존식생 분야에서는 식물도입 내용과 현존식생을 비교 분석한 결과, 저수로변에 파종한 혼합종자 중 싸리류, 벌개미취 등은 대부분 유실되어 큰김의털이 크게 우점하였고, 갈대, 물억새, 갯버들은 소규모로 식재되어 대부분 유실되었다. 지형구조 및 초본식생구조를 종합한 결과, 혼합종자를 파종한 지역은 크게 두 가지 식생유형으로 변화하였는데, 부유물질이 많은 하천 퇴적지에서 주로 생육하는 개여뀌, 소리쟁이 등이 우점하는 지역과 건조지성 벼과식물인 큰김의털, 개밀 등이 우점하는 지역으로 구분되었다. 저수로 호안부에 갈대 및 갯버들을 식재한 공법 적용지는 저수로폭 축소와 함께 유실되었으며, 저수부에 일부 갈대, 물억새, 갯버들이 소규모 군락을 형성하고 있었으나 그 세력이 미미하였고, 식물종 구성이 매우 단순해진 상태였다. 이에 불광천 자연형 정비구간의 관리방안을 제안하였다. 첫째, 도시하천 치수기능을 고려하되 유수 흐름을 모니터링하여 적절한 호안공법을 적용해야 하며, 둘째, 하천환경에 적합한 목표식생군락(目標植生群落)을 설정하고, 고밀도로 꾸준히 식재해야 한다. 이때 현재와 같이 관상용 자생식물 보식은 지양해야 하며,교란식생은 지속적 제거가 필요하였다.

유치열과 영구치열의 구개 각부의 관계에 관한 연구 (A STUDY ON THE RELATIONS OF VARIOUS PARTS OF THE PALATE FOR PRIMARY AND PERMANENT DENTITION)

  • 이용훈;양연미;이용희;김상훈;김재곤;백병주
    • 대한소아치과학회지
    • /
    • 제31권4호
    • /
    • pp.569-578
    • /
    • 2004
  • 본 연구는 유치열과 영구치열에서 구개의 길이, 폭, 깊이 및 치열궁의 형태 등을 조사하여 남녀간의 차이와 유치열과 영구치열간의 변화양상을 파악하는 것이다. 유치열기 아동 100명과 영구치열기 성인 100명 총 200명을 대상으로 하여 상악 석고 모형을 채득하고 3차원 laser scanner(SD Scanner, DS4060, LDI, U.S.A.)를 통한 석고 모델의 측정을 통해 cloud data, polygonization, section curve and loft surface, fit and horizontal plane (Surfacer 10.0. Imageware, U.S.A.)을 기초로 하여 구개의 폭, 길이, 높이 및 치열궁의 형태 등을 계측하였다. 통계학적 분석을 위해 t-tests가 사용되었다. 이에 다음과 같은 결론을 얻었다. 1. 구개의 계측항목에서 유치열 전방부 구개높이를 제외한 나머지 항목에서 남자가 여자보다 크게 나왔으며, 유치열은 전구개폭(p<0.05)과 후구개폭(p<0.01), 영구치열은 구개폭(p<0.05)과 전구개길이(p<0.01), 중구개, 후구개길이(p<0.05)에서 남녀간에 유의한 차이가 있었다. 2. 남녀의 구개지수에서 유치열에서는 구개장고지수(p<0.05)와 구개장폭지수(p<0.01)가 남녀간에 통계학적으로 유의한 차이가 있었다. 영구치열의 구개지수에서는 남녀간에 유의한 차이가 없었다. 3. 유치열과 영구치열의 계측항목 비교에서 후방부 구개폭이 가장 많이 증가하였으며, 다음으로 후방부 구개높이, 전방부 구개폭, 전방부 구개길이 순이었다. 전방부 구개높이와 후방부 구개길이는 오히려 감소하였다. 4. 유치열과 영구치열의 구개지수 비교에서 구개장고지수와 구개장폭지수, 후구개폭고지수는 영구치열에서 증가하였고, 나머지 지수는 감소하였다.보아 Er:YAG 레이저와 Chinese ink로 photosensitization을 시행한 후의 Nd:YAG 레이저 조사는 일정시간 동안 S. mutans의 증식과 산 생성능을 억제시키므로써 치아우식증 예방효과를 얻을 수 있다고 사료되나 억제효과가 오래가지 않아 임상적으로 효과를 얻기 위해서는 자주 조사를 해주어야 한다는 문제점을 안고 있어 임상적으로 치아우식증 예방이란 단독 목적으로 사용하기에는 실용성이 크지 않다고 사료된다.전자현미경 관찰에서 초음파 진동을 가한 군에서 resin tag의 길이가 길었고, lateral branch의 수도 많이 관찰되었다.TEX>$1\rightarrow6$ 결합이 주된 결합인 수용성 글루캔이었다. 이상의 결과를 종합하면 구강에서 분리된 Streptococcus salivarius 119에 의한 Streptococcus mutans의 인공치태 형성 억제작용은 수용성 글루캔 형성에 의한 것으로 사료되었다.동을 유도할 수 있다고 사료된다. 또한 이유식을 통한 다양한 식품의 경험 및 식품 섭취방법 등을 연습하는 과정을 통해 앞으로의 식생활 및 성장 발달에 영향을 미칠 것으로 사료된다. 따라서 영유아의 성장발달에 따른 적절한 영양교육의 실시가 보다 체계적으로 활성화 되어야 하겠으며 이를 위해 실제로 도움이 될 수 있는 구체적인 교육내용, 방법 및 도구의 개발이 요구된다.어서, B군은 A군,C군,D군과 비교하여 통계학적으로 유의성 있는 차이를 보였고(p<0.05), E군은 F군,G군과 비교하여 통계학적으로 유의성 있는 차이를 보였다(p<0.05). 3. 광중합형 및 자가중합형 교정용 전색제는 법랑질탈회 예방효과가 있었다. 4. 광중합형 및 자가중합형 교정용 전색제는 법랑질탈회 진행억제효과가 있었다. 5. 광중합형 및 자가중합형 교정용 전색제 표본에

  • PDF