• 제목/요약/키워드: T-plate

검색결과 1,307건 처리시간 0.024초

시각피질의 기능적 MR 연구: 광자극 크기와 피질 활성화와의 관계 (Functional MRI of Visual Cortex: Correlation between Photic Stimulator Size and Cortex Activation)

  • 김경숙;이호규;최충곤;서대철
    • Investigative Magnetic Resonance Imaging
    • /
    • 제1권1호
    • /
    • pp.114-118
    • /
    • 1997
  • 목적: 기능적 MR 영상은 외부자극에 따라, 이에 상응하는 특정한 뇌피질 부위의 혈류량의 변화를 신호강도의 차이로 나타내는 방법이다. 시각피질에 대한 기능적 MR은 환자가 광자극을 응시함으로써 수행될 수 있는 것으로, 이의 수행에는 적절한 형태의 광자극원이 필수적이다. 이에 저자는 광자극원의 크기가 시각피질 활성화에 영향을 미칠 수 있는지 알아보기 위하여 본 연구를 하였다. 대상 및 방법: 정상적인 시력을 가진 자원자 5명을 대상으로 시각활성화 기능적 MR을 시행하였다. 광자극원은 $11{\times}8cm$ 크기의 기판에 적색 LED(light-emitting diodes) 39개를 박고 직류전원을 사용하도록 만들었다. 이를 크기에 따라 full field, half field 및 focal central field의 3가지로 구분하고 8Hz로 점멸하였다. EPI 기법으로 6회의 광자극 기간과 6회의 휴식기간을 번갈아 3차례 시행하여 총 36회의 검사를 하고, Z-score로 통계처리하였다. 이 때 얻은 활성화 영상을 같은 부위의 T1강조영상에 결합시켰다. 각 경우에서 시각피질에서 활성화된 pixel의 수를 full field, half field 및 focal central field에서 얻어진 pixel 수의 합으로 나누어 활성화지수를 구하였다. 이 활성화지수를 토대로 광원크기와의 관계를 분석하였다. 결과: Full field로 자극을 주었을 때 시각피질의 평균 신호강도의 증가는 약 9.6%였다. 4명에서 활성화지수는 full field, half field, focal central field의 순으로 감소하였으며, 나머지 1명에서는 half field 시의 값이 full field 시의 값보다 컸다. 광원크기에 따른 활성화지수의 범위는 full field 43-73%(평균 55%), half field 22-40%(평균 32%), focal central field 5-24%(평균 13%)였다. 결론: 기능적 MR영상을 이용하여 시각피질의 활성화를 용이하게 확인할 수 있었으며 광자극원의 크기에 따라 증가되는 시각피질 활성화를 입증할 수 있었다.

  • PDF

울릉분지와 동해 해산의 기원과 발달과정에 대한 해양지구물리학적 연구 (Marine Geophysical Constraints on the Origin and Evolution of Ulleung Basin and the Seamounts in the East Sea)

  • 김진호;박수철;강무희;김경오;한현철
    • 자원환경지질
    • /
    • 제38권6호
    • /
    • pp.643-656
    • /
    • 2005
  • 동해는 일본분지, 야마토 분지, 울릉분지 등 큰 3개의 해양분지와 크고 작은 고지대(topographic hihgs) 등으로 구성되어 있고, 주변해(marginal sea) 또는 후배호 분지 (back-arc basin)로 분류되며 태평양판, 필리핀판 등이 주변해 위치하고 있다. 동해의 남서쪽에 위치한 울릉분지는 평균수심 약 1500 미터, 최대수심 약 2500 미터를 보이며, 2000 미터 등 심선을 따라 동해의 일본 분지와 연결되어 있다. 분지 내에서 해저면 경사는 대체적으로 서쪽이 크게 나타나며, 남쪽과 동쪽의 경사는 이에 비하여 상대적으로 작게 나타난다. 지진계(OBS) 자료와 탄성파 자료 등에 의해 밝혀진 울릉분지의 지각 두께는 북쪽으로 그리고, 한국 연안 쪽으로 갈수록 두꺼워지는 경향을 보이며, 퇴적물의 두께는 울릉분지 남서쪽으로 갈수록 점차 두꺼워져 최대 약 12km에 이른다 울릉분지의 지각은 열개된 대륙지각(rifted continental crust), 신장된 대륙지각, 해저확장 초기단계에 형성된 해양지각 등 다양하게 제시되고 있으나 현재까지 구체적 증거는 없다. 수심 및 중력자료에 의하면, 울릉분지의 축은 북서-남동 방향으로 발달하고 있다. 또한, 후리에어-이상의 분포도 수심 자료와 유사하게 북서-남동 방향의 축을 중심으로 대칭성을 보이고 있으며, 퇴적물의 두께 분포 역시 북서쪽에서 남동 방향으로 진행하면서 일반적으로 두꺼워지는 양상을 보이고 있다. 울릉분지가 상대적으로 절은 연령에 해당하는 지각임에도 불구하고, 전체적으로는 후리에어-이상 값이 $-40\~50mGal$ 정도의 낮은 특징을 보이는데 이것은 울릉분지를 구성하는 지각과 퇴적물의 밀도가 일본분지와 야마토 분지를 구성하는 물질에 비하여 상대적으로 낮다는 것을 의미한다.나타났고, 이에 대한 적극적인 대안으로 의사와 간호사를 위한 교육프로그램 개발과 교육이 절실히 필요한데 일시적이고 일회적인 교육보다는 지속적이고 장기적이고 자동적으로 운영되는 체계가 필요하다.후 32.4$\pm$4.4, 32.1$\pm$4.5, 술 후 1일에 33.4$\pm$5.0, 31.7$\pm$5.1였다(repeated measures ANOVA, p < 0.05). 술 후 출혈량(mL)은 RAP군과 대조군에서 술 후 6시간에 357.2$\pm$ 177.1, 411.7 $\pm$ 279.5, 술 후 24시간에 599.4$\pm$145.6, 678.8 $\pm$256.4였다(t-test, p < 0.05). 동종 수혈은 RAP군에서 34명 중 7명에서(20.6$\%$), 대조군에서는 46명중 16명에서(34.8$\%$) 시행되어, RAP군에서 유의하게 빈도가 낮았다(Chi-square test, p < 0.05). 결론: 역행성 자가 충전법은 심폐바이패스의 충전에 의한 혈액희석을 최소화함으로서, 개심술 후 출혈과 동종수혈을 또한 줄이는 데 효과적인 방법이 될 수 있다고 생각된다.타내지 않았다.성 교사, 가정 전공 교사가 그렇지 않은 교사보다 해석적, 해방적 행동목표를 더 중요하게 인식하고 있었다. 특히 가정교육 철학을 배운 경험이 있는 교사가 그렇지 않은 교사보다 해방적 행동체계 목표를 중요시하는 것으로 나타났다. 이 연구 결과는, 실천 비판적인 가정 교과의 본질을 구현하기 위해서는 주생활 영역의 교육과정에 기술적, 해석적, 해방적 행동에 대한 목표들을 고루 포함하여야 하며 특히

탈곡기의 급동 속도가 도정 손실에 미치는 영향 (Effect of Thresher Drum-Speed on the Quality of the Milled Rice)

  • 정창주;고학균;이종호;강화석
    • Journal of Biosystems Engineering
    • /
    • 제4권2호
    • /
    • pp.10-24
    • /
    • 1979
  • It is understood that drum speed of threshers and the moisture content of paddy grains to be threshed, respectively, have a signific:mt effect upon rice recoveries. Threshing under an increased drum speed would give a high performance rate, which is the general practice in custom work threshing in association with the use of semiauto-t hreshers. In the connection, however, it may result in the promotion of grain cracks and brokens of the rice product after milling. No reference or determination for an opti mum drum speed of the thresher is made available for various grain moisture contents at the time of the threshing operation and for different rice varieties especially for the Tongil rice varieties. This study was Conducted to find out and determine effects of the drum speeds on grain losses. The grain loss was quantified in terms of recovery rates of rice grains after treatments. Samples of each of all treatments were taken from the grain sampling plate placed in the grain conveyor of threshers. The grain sample plate was specially provided for this experiment. The brown-rice, milling, and head-rice recJveries were tes ted in the laboratory mill, respectively. Two rice varieties, Akibare and Suweon 251, each with five levels of different moist\ulcornerure contents at harvest and six levels of different drum speeds of threshers, were selected and used for treatments in this experiment. Two conditions of materials were tested in the thresher. One condition was to thresh the experimental material immediately after cutting, referred to as the wet-material thr eshing in this study. The other was to thresh the experimental :material, dried to contain about 15-16 percent of the grain moisture under the shocking operation. This is referred to as the dry-material threshing in this study. In additioon, field measurements for the grain moistures and drum-sdeeds under actual operation practices of the traditional field threshing, were conducted with a view to comparing with results of the experimental treatments. The results of the study may be summarized as follows: 1. For threshing treatments of Japonica-type rice variety (Akibare) , the effect of drum speeds and levels of grain moisture at cutting upon brown-rice, milling, and head-rice recoveries were found statistically significant. No significant difference in these recovery rates was noticed regardless of whether the material was threshed right after cutting or after drying by the shocking operation. 2. For the Tongil-sister rice variety(Suweon 251), milling recovery for the varied drum-speed and the grain~moisture level at cutting was found statististically significant. Th milling recovery was much significant when associated with the wet-material thres\ulcornerhing compared to the dry-material threshing. 3. The optimum peripheral velocity to be maintained at the edge of teeth on the thr\ulcorneresher drum was determined and may be recommanded as that of about 12 to 13 meters per second in view of the maximum recovery rate of the milled rice. 4. The effect of the drum speed on the qualitative loss of the milled rice was much greater in the case of the Tongil variety than Japonica. This effect was also greater by the wet-material threshing than by the dry-material threshing. Therefore, to apply the wet-material threshing operation for the Tongil variety, in particular, it should be very important to introduce the kind of threshing technology which would maintain the drum speed at optimum. 5. A field survey for the actual drum speed of threshing operations for 50 threshers indicated that average peripheral velccity was 12.76m/sec., and that the range was from 10.50 to 14.90m/sec. Approximately, more than 30% of the experimented and measured threshers were being operated at speeds which exceeded the optimum speed determined and assessed in this study. Accordingly, it should be highly desirable and important to take counter-measures against these threshing practices of operational overspeed.

  • PDF

탈곡기의 급동 속도가 도정 손실에 미치는 영향 (Effect of Thresher Drum-Speed on the Quality of the Milled Rice)

  • 정창주;고학균;이종호;강화석
    • Journal of Biosystems Engineering
    • /
    • 제4권2호
    • /
    • pp.9-9
    • /
    • 1979
  • It is understood that drum speed of threshers and the moisture content of paddy grains to be threshed, respectively, have a signific:mt effect upon rice recoveries. Threshing under an increased drum speed would give a high performance rate, which is the general practice in custom work threshing in association with the use of semiauto-t hreshers. In the connection, however, it may result in the promotion of grain cracks and brokens of the rice product after milling. No reference or determination for an opti mum drum speed of the thresher is made available for various grain moisture contents at the time of the threshing operation and for different rice varieties especially for the Tongil rice varieties. This study was Conducted to find out and determine effects of the drum speeds on grain losses. The grain loss was quantified in terms of recovery rates of rice grains after treatments. Samples of each of all treatments were taken from the grain sampling plate placed in the grain conveyor of threshers. The grain sample plate was specially provided for this experiment. The brown-rice, milling, and head-rice recJveries were tes ted in the laboratory mill, respectively. Two rice varieties, Akibare and Suweon 251, each with five levels of different moist?ure contents at harvest and six levels of different drum speeds of threshers, were selected and used for treatments in this experiment. Two conditions of materials were tested in the thresher. One condition was to thresh the experimental material immediately after cutting, referred to as the wet-material thr eshing in this study. The other was to thresh the experimental :material, dried to contain about 15-16 percent of the grain moisture under the shocking operation. This is referred to as the dry-material threshing in this study. In additioon, field measurements for the grain moistures and drum-sdeeds under actual operation practices of the traditional field threshing, were conducted with a view to comparing with results of the experimental treatments. The results of the study may be summarized as follows: 1. For threshing treatments of Japonica-type rice variety (Akibare) , the effect of drum speeds and levels of grain moisture at cutting upon brown-rice, milling, and head-rice recoveries were found statistically significant. No significant difference in these recovery rates was noticed regardless of whether the material was threshed right after cutting or after drying by the shocking operation. 2. For the Tongil-sister rice variety(Suweon 251), milling recovery for the varied drum-speed and the grain~moisture level at cutting was found statististically significant. Th milling recovery was much significant when associated with the wet-material thres?hing compared to the dry-material threshing. 3. The optimum peripheral velocity to be maintained at the edge of teeth on the thr?esher drum was determined and may be recommanded as that of about 12 to 13 meters per second in view of the maximum recovery rate of the milled rice. 4. The effect of the drum speed on the qualitative loss of the milled rice was much greater in the case of the Tongil variety than Japonica. This effect was also greater by the wet-material threshing than by the dry-material threshing. Therefore, to apply the wet-material threshing operation for the Tongil variety, in particular, it should be very important to introduce the kind of threshing technology which would maintain the drum speed at optimum. 5. A field survey for the actual drum speed of threshing operations for 50 threshers indicated that average peripheral velccity was 12.76m/sec., and that the range was from 10.50 to 14.90m/sec. Approximately, more than 30% of the experimented and measured threshers were being operated at speeds which exceeded the optimum speed determined and assessed in this study. Accordingly, it should be highly desirable and important to take counter-measures against these threshing practices of operational overspeed.

현대금속공예용 동합금판의 재료분석과 형질변환 실험 및 응용에 관한 연구 (A Study of material analysis and its experimentation of metamorphosis and its utilities in Copper Alloy plates for contemporary metal craft)

  • 임옥수
    • 디자인학연구
    • /
    • 제17권4호
    • /
    • pp.241-250
    • /
    • 2004
  • 이 논문은 현재에 통용되고 있는 동합금판 C2200, C5210, C7701, C8113 등의 특징 및 용도와 소재의 재질적 특성을 data화하였고, 그 표현의 가능성을 조사하여 수치화하였고, 그 기법실험의 1단계로서 일반접합과 TIG 접합에 대하여, 2단계 실험으로서 망상조직기법과 전해주조기법에 대하여 농하였으며, 이 기법을 응용한, 연구작품의 3가지 사례를 다루었다. 이 때 사용한 동합금은 (주)풍산금속 소재기술연구소 이동우 박사가 지원한 4가지 동합금, 즉 단동, 스프링용 인청동, 스프링용 양백, 백동을 사용하여, 적층기법, 망상조직기법, 융합기법, 전해주조기법을 작품에 따라서 통합 또는 부분적으로 적용시켰다. C2200 의 경우, 황동은 2mm이하의 박판(薄板)에서는 교류 TIG 용접법이 좋으며 그 이상에서는 직류 정극성 TIG 용접법으로, 용접에 의한 잔류 응력부식을 열처리를 250~300도에서 행한다. C5210 의 경우는 고온의 환원성기(還元性氣)중에서도 수소(水素) 취성이 없고 고온에서 O를 흡수하지 않으며, 경화(輕化) 온도도 약간 높아, 용접용으로 매우 적합하다. 일반적으로 Sn을 2-9% P를 0.03-0.4%정도 포함하고 있는데, Sn의 함유량이 증가함에 따라 응고 온도 범위가 광범위해졌으며 용접후의 냉각 시, 열분열 방지에는 TIG용접의 용접속도를 빠르게, 용융지(溶融池)를 작게, 예열 온도는 200도로 하는 것이 좋다. C7701의 경우는 조성범위가 10-20% Ni, 15-30% Zn의 것이 많이 사용된다. 약 30% Zn 이상이 되면(${\alpha}+{\beta}$) 조직이 되어 점성이 낮아지고 냉간 가공성은 저하하나 열간 가공성은 좋다. 양백은 또한 전기저항이 높고 내열, 내식성이 좋다. C8113의 경우는 내해수성, 내마모성이 우수하며 고온 강도가 높고 백동은 10-30% 니켈을 포함하며 완전히 고용(固溶)해서 단상(單相)이 된다. 이 때문에 결정입(結晶粒)도 크게 되기 쉬우며, 구속이 강한 경우 미량의 Pb, P, S라는 분열 감수성이 높아진다.

  • PDF

고분자 전해질 연료전지용 바이폴라 플레이트의 유로 연구 (Study on the channel of bipolar plate for PEM fuel cell)

  • 안범종;고재철;조영도
    • 한국가스학회지
    • /
    • 제8권2호
    • /
    • pp.15-27
    • /
    • 2004
  • 본 논문은 상용 프로그램인 Fluent를 이용하여 고분자 전해질 연료전지(polymer electrolyte membrane fuel cell)의 바이폴라 플레이트 위에 새겨진 유로형상을 분석함으로서 연료전지의 성능을 향상시키는데 그 목적이 있다. 수소 소모량이 가장 많은 유로크기를 구하기 위하여 0.5 ${\~}$ 3.0mm의 범위에 대해 시뮬레이션을 수행하였으며, 유로너비, 지면너비, 유로깊이가 적을수록 아노드에서 수소이용율이 높음을 알 수 있었다. 유로너비가 증가하면 유로의 전체길이를 감소하므로 유로에서 압력하락이 감소하게 되며, 지면너비를 증가시키면 수소가 지면 밑으로 확산하여 수소의 순 소비가 감소하기 때문이다. 또한 유로너비를 변화시키는 것은 지면너비를 변화시키는 것보다 수소 소모에 민감하게 영향을 끼침을 알 수 있었다. 유로깊이에 따른 수소 소모량의 변화는 유로너비에 비해 크지 않으나 유로깊이는 바이폴라 플레이트의 부피에 크게 영향을 미치므로 가능한 한 적게 하여야 한다. 그러나 현실적으로 기계가공이 가능한 1mm이상의 유로에서는 유로너비 1.0mm, 지면너비 1.0mm, 유로깊이 0.5mm에서 수소 이용율이 가장 높았으며 최적 유로크기로 판단된다. 시뮬레이션결과로부터 최적 유로크기로 성형한 2cm${\times}$2cm크기의 대각선형과 5자형 유동장에 MEA를 결합한 단위전지의 성능을 100W 연료전지평가시스템을 이용하여 측정하였다. 측정결과는 대각선형과 5자형에서 유사하게 높은 OCV가 나타났으며, 전류밀도는 0.6V이하에서는 대각선형이 $2-40mA/m^2$ 더 높았으나 0.7-0.8V에서는 S자형이 $5-10mA/m^2$ 더 높게 나타났다.질을 향상시키고 의료자원의 효율적인 이용을 촉진하기 위해 호스피스 완화의료 서비스의 표준화와 제도화가 필요하다.를 활용한 사용자인터페이스(UI)디자인의 가능성을 확대시킬 수 있을 것이다. 스크린의 사용에 있어서 사용자의 시각적 한계성을 극복하기 위한 새로운 GUI의 시도와 제안은 향후 모바일 기기 디자인의 새로운 방향성을 제시하고 있다.각되며 이를 위해서는 호스피스 관련 기관뿐만 아니라 국가적 차원의 아동 호스피스에 대한 관심과 지원이 요구된다고 생각한다. 양상과 일치하였고 표준조건(water flux 1 cm/일)에서 예측된 이동소요시간에 따라 metolcarb는 most mobile, molinate와 fenobucarb, isazofos는 mobile내지 most mobile, dimepiperate는 moderately mobile이나 mobile, diazinon은 mobile, fenitrothion과 parathion은 slightly mobile 또는 mobile, chloipyrifos-methyl은 immobile이나 slightly mobile 등급에 속하는 것으로 나타났다.히 요구되고 있는 현실이다.브로 출시에 따른 마케팅 및 고객관리와 관련된 시사점을 논의한다.는 교합면에서 2, 3, 4군이 1군에 비해 변연적합도가 높았으며 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다 이번 연구를 통하여 복합레진을 간헐적 광중합시킴으로써 변연적합도가 향상될 수 있음을 알 수 있었다.시장에 비해 주가가 비교적 안정적인 수준을 유지해 왔다고 볼 수 있다.36.4%)와 외식을 선호(29.1%)${\lrcorner}$ 하기 때문에 패스트푸드를 이용하게 된 것으로 응답 하였으며, 남 여 대학생간에는 유의한

  • PDF

핸디사이즈 운임지수 및 스팟용선료 변화에 영향을 미치는 요인 분석 (Factor Analysis Affecting on Changes in Handysize Freight Index and Spot Trip Charterage)

  • 이충호;김태우;박근식
    • 한국항만경제학회지
    • /
    • 제37권2호
    • /
    • pp.73-89
    • /
    • 2021
  • 핸디사이즈 벌크선 시장은 중대형 선박으로 운송이 불가능한 다양한 화물을 운송할 수 있으며, Spot용·대선 시장이 활성화 되어 있고 중대형 벌크선과 독립적인 성격의 시장으로 단기간에 변화하는 시황 및 용선료 변동성에 의한 위험이 보다 많은 시장이다. 본 연구에서는 부정기 벌크선 선형에서 핸디사이즈 운임지수(BHSI)와 Spot용선료에 영향을 미치는 요인들을 검정하고 요인들의 과거 값을 이용하여 종속변수의 동태적 반응을 파악 및 단기 예측을 위하여 벡터자기회귀모형(VAR)을 이용하여 분석을 하였다. 인과성 검정 결과 핸디사이즈의 주요 선적 화물인 원료탄, 일본후판, 열연강판의 가격과 선복량, 선박유가와 인과관계가 나타났으며, VAR모형의 적정시차와 안정성을 확인 후 충격반응함수와 예측오차분해분석을 실시하였다. 충격반응함수 분석 결과 원료탄 가격, 열연강판 가격, 선박유가 3가지 변수는 신뢰구간 상한과 하한이 모두 같은 구간으로 유의하다고 나타났으며, 열연강판 가격의 충격이 가장 유의한 영향을 미치는 것으로 확인되었다. 운임지수(BHSI)와 Spot용선료 두 종속변수 모두 거의 동일한 결과로 나타났으며 t시점에서 발생한 원료탄가격의 표준편차 1단위의 충격에 양(+)의 영향, 열연강판 가격의 충격에 양(+)의 영향, 선박유가의 충격에는 음(-)의 영향의 결과를 보였다. 예측오차 분산분해분석 결과 운임지수(BHSI)와 Spot용선료에 영향을 미치는 설명력은 열연강판 가격, 원료탄 가격, 선박유가, 일본후판 가격, 선복량 순으로 동일하게 나타났으며 열연강판 가격의 설명력은 3기부터 점차 상승하여 운임지수에는 30%, Spot용선료에는 26%까지 영향을 미친다고 나타났다. 기존 선행연구와 차별화하여 단기적인 시차 영향을 알아보기 위해 주요 선적화물의 월간 가격 데이터를 사용하여 분석을 수행하였으며, 월 단위 시황 예측이 가능한 유의미한 결과를 도출하였다. 이 연구가 핸디사이즈 선박을 운항하는 선사와 핸디사이즈 용·대선 시장 관계자들에게 단기적인 시황 예측에 도움이 될 수 있다는데 의의가 있다고 생각한다.

스케일링 시 에어로졸에 의한 술자의 의복 오염도 (Contamination of operator's clothing by aerosols during scaling)

  • 강경희;김예진;민지연;박슬기;우주희;궁화수
    • 대한치과의료관리학회지
    • /
    • 제5권1호
    • /
    • pp.31-37
    • /
    • 2017
  • 감염관리는 전반적인 의료행위에서 중요성이 부각되고 있으며 치과 또한 철저한 감염관리가 필요하다. 감염의 매개체에는 여러 가지가 있고, 그 중 의료진 의복으로 인한 감염이 있다. 병원 직원의 오염된 의복은 원내감염의 매개체가 될 수 있다. 이에 스케일링 시 에어로졸에 의한 의복오염도를 실험하였다. 가슴, 배, 허벅지, 소매 끝, 바지 끝 부위를 실험 대상으로 하였다. 실험한 자료는 IBM SPSS (ver20.0) 통계프로그램으로 분석하였다. 스케일링 전(대조군)과 스케일링 후(실험군) colony수의 평균값은 ANOVA (일원배치분산분석)을 사용하였으며, 사후 분석은 Scheffe를 시행하였다. 스케일링 전-후 colony수의 평균값에 대한 유의성 검증은 Paired t-test 비모수 검정방법을 사용하였다. 1. 의복의 가슴 부위에서 스케일링 전 colony수의 평균은 2.13 CFU이고, 스케일링 후 colony 수의 평균은 50.00 CFU로 약 25배 증가한 것으로 나타났다(p=0.012). 2. 의복의 배 부위에서 스케일링 전 colony수의 평균은 4.00 CFU이고, 스케일링 후 colony수의 평균은 16.63 CFU로 약 4배 증가한 것으로 나타났다(p=0.018). 3. 의복의 허벅지 부위에서 스케일링 전 colony수의 평균은 3.63 CFU이고, 스케일링 후 colony수의 평균은 22.88 CFU로 약 7배 증가한 것으로 나타났다(p=0.017). 4. 의복 소매 끝에서 스케일링 전 colony수의 평균은 3.63 CFU이고, 스케일링 후 colony수의 평균은 17.38 CFU로 약 6배 증가한 것으로 나타났다(p=0.028). 5. 의복 바지 끝에서 스케일링 전 colony수의 평균은 2.38 CFU이고, 스케일링 후 colony수의 평균은 33.63 CFU로 약 17배 증가한 것으로 나타났다(p=0.012). 6. 스케일링 후 의복 부위에서 colony수의 평균은 가슴, 바지 끝, 허벅지, 배, 소매 끝 순으로 높게 나타났다. 7. 스케일링 전-후 colony수의 증가율은 가슴, 바지 끝, 허벅지, 소매 끝, 배 순으로 높게 나타났다. 스케일링 시 에어졸로에 의해 의복이 오염되는 것을 확인하였다. 그러므로 우리는 스케일링에 의한 에어로졸로 의복이 오염되는 것을 인지하고 스케일링 후에는 의복을 깨끗이 해야 할 필요성이 있다. 이에 따라 치과기구관리와 함께 의복도 감염방지 대책이 시급한 것으로 보인다. 또한 치과 의료인들에게 자세한 감염교육이 필요할 것이다. 실험 결과로 의복오염의 심각성을 일깨우고, 의복에 대한 감염의식을 높여야 된다.

중공형상 및 재료의 영향을 고려한 도넛형 이방향 중공슬래브의 일방향 전단강도 (One-Way Shear Strength of Donut Type Biaxial Hollow Slab Considered Hollow Shapes and Materials)

  • 정주홍;이승창;최창식;최현기
    • 콘크리트학회논문집
    • /
    • 제24권4호
    • /
    • pp.391-398
    • /
    • 2012
  • 이 연구는 도넛형 중공형성체를 사용한 이방향 중공슬래브의 일방향 전단 성능에 관한 연구이다. 최근 건물의 고층화 및 장경간화로 인하여, 다양한 자중 저감형 슬래브 공법에 대한 연구가 진행되고 있다. 이방향 중공슬래브 시스템은 구조성능 저하를 최소화하면서 자중을 효율적으로 줄일 수 있는 시스템으로 알려져 있다. 하지만 기존 연구에 따르면 이방향 중공슬래브는 일반 RC 슬래브에 비해 낮은 전단강도를 가지고 있으며, 이는 중공형상 및 중공형성체 재료에 의해 영향을 받는 것으로 보고되고 있다. 또한 현재의 설계기준은 이방향 중공슬래브의 일방향 전단강도에 대해 명확한 기준을 제시하지 못하고 있다. 도넛형 이방향 중공슬래브의 일방향 전단강도를 확인하기 위하여, 총 4개의 전단강도 실험체를 제작/실험하였다. 그 중 한 개의 실험체는 기준 RC 실험체이고 나머지는 모두 중공슬래브이다. 변수는 도넛형과 비도넛형 두 가지의 중공형상 및 일반 플라스틱과 유리섬유 강화 플라스틱 중공형성체로 설정하였다. 실험 결과, 중공형상과 재료에 따라 이방향 중공슬래브의 전단강도는 차이를 보임을 확인할 수 있었다. 또한 이 결과를 바탕으로 기존의 구형 중공슬래브의 일방향 전단강도 산정시 사용되는 유효단면 산정법의 도넛형 이방향 중공슬래브 적용에 대한 문제점을 도출하였다.

DGGE 기법을 이용한 생물활성탄 공정의 부착 박테리아 군집분석 (Analysis of Attached Bacterial Communities of Biological Activated Carbon Process Using DGGE Method)

  • 손희종;최진택;손형식;이상준
    • 대한환경공학회지
    • /
    • 제34권8호
    • /
    • pp.533-540
    • /
    • 2012
  • BAC 공정 운전초기부터 부착 박테리아들의 생체량이 정상상태(steady-state)에 도달한 이후까지 $BDOC_{total/rapid/slow}$ 제거율의 변화와 DGGE와 ATP 분석을 통하여 부착 박테리아들의 군집과 생체량을 평가하였다. 용존 유기물질 제거율 평가에 따른 BAC 공정의 정상상태 도달 여부 평가결과를 보면 DOC의 경우 운전 bed volume 27,500 부근에서 BAC 공정이 정상상태에 도달하였고, $BDOC_{rapid}$$BDOC_{total/slow}$의 경우는 각각 운전 bed volume 15,000 부근과 32,000 부근에서 정상상태에 도달하였다. BAC 공정의 운전기간 증가에 따른 HPC 및 ATP 농도 분석을 통한 부착 박테리아들의 생체량 평가결과 bed volume 22,500 이후로 거의 일정한 생체량을 유지하였으며, 이 때 HPC와 ATP 농도는 각각 $3.3{\times}10^8$ cells/g 및 $2.14{\mu}g/g$ 정도로 나타났다. DGGE를 이용하여 운전기간 증가에 따른 BAC 부착 박테리아들의 군집분석 결과 운전초기(bed volume 8,916)의 경우 분석가능한 DGGE band 개수가 5개였으나 운전기간 증가에 따라 분석가능한 DGGE band 개수는 최대 11개로 증가하였다. 또한, DGGE를 이용한 박테리아 군집분석 결과 BAC 운전기간의 증가에 따라 다양한 박테리아 그룹들이 존재하였고, Pseudomonas fluorescens, Acinetobacteria와 유사한 uncultured bacterium, uncultured Novosphingobium sp. 및 Flavobacterium frigidarium은 운전초기 단계부터 지속적으로 부착 박테리아 군집을 형성하였고, 전체적으로 Proteobacteria 그룹이 비교적 높은 비율로 우점하였다.