• 한국융합학회논문지
• /
• 제10권10호
• /
• pp.27-31
• /
• 2019

본 연구의 목적은 교내 실습실의 유니트체어 수관의 바이오필름을 채취하여 미생물을 분석하고, 기존적인 물빼기방법과 소독제를 사용하는 방법을 적용하여 미생물 수의 변화를 비교하고자 실시하였다. 교내의 수관으로부터 샘플을 채취한 후 R2A배지를 이용하여 배양하였다. 미생물 동정을 거쳐 분리된 미생물의 균종을 분석하였다. 물빼기에 대한 미생물 감소를 확인하기 위해 30초, 60초, 120초 간격으로 샘플을 채취하였고, 소독제의 효과를 확인하기 위해 소독 후 샘플을 채취하였다. 이렇게 수거된 샘플을 통해 얻은 미생물의 정량적 비교는 SPSS 프로그램을 이용하였다. 결과에서 동정된 균주는 총 8개로 나타났으며 대부분 그람음성인 Sphingomonas 계열로 확인되었다. 60초의 물빼기를 통해 미생물의 수가 급감하는 것을 확인하였고, 소독 즉시 미생물은 검출되지 않았다. 본 연구에서 제시된 방법과 결과를 바탕으로 소홀하게 관리될 수 있는 유니트체어의 수관을 관리함으로써 교차 감염을 예방하고 체계적인 관리가 가능할 것이다.

• 대한치과교정학회지
• /
• 제51권4호
• /
• pp.231-240
• /
• 2021

Objective: This outcome analysis study evaluated the actual positions of the orthodontic miniplate and miniplate anchoring screws (MPASs) and the risk factors affecting adjacent anatomic structures after miniplate placement in the mandibular incisal area. Methods: Cone-beam computed tomographic images of 97 orthodontic miniplates and their 194 MPASs (diameter, 1.5 mm; length, 4 mm) in patients whose miniplates provided sufficient clinical stability for orthodontic treatment were retrospectively reviewed. For evaluating the actual positions of the miniplates and analyzing the risk factors, including the effects on adjacent roots, MPAS placement height (PH), placement depth (PD), plate angle (PA), mental fossa angle (MA), and root proximity were assessed using the paired t-test, analysis of variance, and generalized linear model and regression analyses. Results: The mean PDs of MPASs at positions 1 (P1) and 2 (P2) were 2.01 mm and 2.23 mm, respectively. PA was significantly higher in the Class III malocclusion group than in the other groups. PH was positively correlated with MA and PD at P1. Of the 97 MPASs at P1, 49 were in the no-root area and 48 in the dentulous area; moreover, 19 showed a degree of root contact (19.6%) without root perforation. All MPASs at P2 were in the no-root area. Conclusions: Positioning the miniplate head approximately 1 mm lower than the mucogingival junction is highly likely to provide sufficient PH for the P1-MPASs to be placed in the no-root area.

• 대한통합의학회지
• /
• 제9권1호
• /
• pp.41-48
• /
• 2021

Purpose : The purpose of this study is to find out if it helps to improve static balance ability and weight bearing rate for chronic stroke patients with poor balance in clinical intervention through a method of correcting movement errors while performing a task by vibrotactile bio-feedback providing pressure information. Methods : Fifteen chronic stroke patients (12 male and 3 female) were participated in this study. To examine the effects of vibrotactile bio-feedback and general standing without bio-feedback on static balance ability and weight distribution symmetric index in all subjects randomized with R Studio. The static balance ability and weight distribution symmetric index of the participants was evaluated using a force plate. A paired t-test was used for comparison of each conditions. Statistical significance was set at α=0.05. Results : The comparisons of static balance ability and weight distribution symmetric index in chronic stroke patients after two different condition are as follows. In the static balance ability and weight distribution symmetric index, the vibrotactile feedback providing pressure information showed a significant difference compared to none feedback (p<.001). Conclusion : The vibrotactile bio-feedback providing pressure information in real time can support an improve in static balance ability, uniform weight bearing rehabilitation in chronic stroke patients. In the future, it is hoped that a follow-up study that provides a better direction of intervention compared to various feedback interventions commonly used in clinical practice.

• Steel and Composite Structures
• /
• 제42권4호
• /
• pp.427-446
• /
• 2022

Cutouts in the beams or plates are often unavoidable due to inspection, maintenance, ventilation, structural aesthetics purpose, and sometimes to lighten the structures. Therefore, there will be a substantial reduction in the strength of the structure due to the introduction of the cutouts. However, these cutouts can be reinforced with the different patterns of ribs (stiffener) to enhance the strength of the structure. The present study highlights the influence of the elliptical cutout reinforced with a different pattern of ribs on the stability performance of such stiffened composite panels subjected to non-uniform edge loads by employing the Finite element (FE) technique. In the present formulation, a 9-noded heterosis element is used to model the skin, and a 3-noded isoparametric beam element is used to simulate the rib that is attached around a cutout in different patterns. The displacement compatibility condition is employed between the plate and stiffener, and arbitrary orientations are taken care by introducing respective transformation matrices. The effect of shear deformation and rotary inertia are incorporated in the formulation. A new mesh configuration is developed to house the attached ribs around an elliptical cutout with different patterns. Initially, a study is performed on the panels with different stiffener schemes for various ply orientations and for different stiffener depth to width ratios (d_s/b_s) to determine an optimal stiffener configuration. Further, various parametric studies are conducted on an obtained optimal stiffened panel to understand the effect of cutout size, cutout orientation, panel aspect ratio, and boundary conditions. Finally, from the analysis, it can be observed that the arrangement of the stiffener attached to a panel has a major impact on the buckling capacity of the stiffened panel. The stiffener's depth to width ratio also significantly influences the buckling characteristic.

• 대한치과교정학회지
• /
• 제51권3호
• /
• pp.179-188
• /
• 2021

Objective: To evaluate the overall treatment effects in terms of the amount of uprighting with changes in the sagittal and vertical positions of mandibular molars after applying an orthodontic miniplate with a nickel-titanium (NiTi) reverse curve arch wire (biocreative reverse curve [BRC] system). Methods: A total of 30 female patients (mean age, 25.99 ± 8.96 years) were treated with the BRC system (mean BRC time, 10.3 ± 4.07 months). An I-shaped C-tube miniplate (Jin Biomed) was placed at the labial aspect for the alveolar bone of the mandibular incisors. A 0.017 × 0.025-inch NiTi reverse curve arch wire was engaged at the C-tube mini-plate anteriorly and the first and second premolars and molars posteriorly in the mandibular arch. Pre- and post-BRC lateral cephalograms were analyzed. A paired t-test was used to analyze the treatment effects of BRC. Results: The mandibular second molars were intrusively uprighted successfully by the BRC system. Distal uprighting with a controlled vertical dimension was noted on the first molars when they remained engaged in the BRC and the distal ends of the arch wire were laid on the second molars. The mandibular first and second premolars showed a slight extrusion. The changes in the mandibular incisors were unremarkable, while the mandibular molar angulation improved significantly. The lower occlusal plane rotated counterclockwise (MP-LOP: 1.13° ± 2.60°). Conclusions: The BRC system can provide very effective molar uprighting without compromising the position of the mandibular anterior teeth.

• Structural Engineering and Mechanics
• /
• 제83권5호
• /
• pp.693-707
• /
• 2022

Bonded joints have proven their performance against conventional joining processes such as welding, riveting and bolting. The single-lap joint is the most widely used to characterize adhesive joints in tensile-shear loadings. However, the high stress concentrations in the adhesive joint due to the non-linearity of the applied loads generate a bending moment in the joint, resulting in high stresses at the adhesive edges. Geometric optimization of the bonded joint to reduce this high stress concentration prompted various researchers to perform geometric modifications of the adhesive and adherends at their free edges. Modifying both edges of the adhesive (spew) and the adherends (bevel) has proven to be an effective solution to reduce stresses at both edges and improve stress transfer at the inner part of the adhesive layer. The majority of research aimed at improving the geometry of the plate and adhesive edges has not considered the effect of temperature and water absorption in evaluating the strength of the joint. The objective of this work is to analyze, by the finite element method, the stress distribution in an adhesive joint between two 2024-T3 aluminum plates. The effects of the adhesive fillet and adherend bevel on the bonded joint stresses were taken into account. On the other hand, degradation of the mechanical properties of the adhesive following its exposure to moisture and temperature was found. The results clearly showed that the modification of the edges of the adhesive and of the bonding agent have an important role in the durability of the bond. Although the modification of the adhesive and bonding edges significantly improves the joint strength, the simultaneous exposure of the joint to temperature and moisture generates high stress concentrations in the adhesive joint that, in most cases, can easily reach the failure point of the material even at low applied stresses.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권1호
• /
• pp.49-54
• /
• 2009

This paper presents the numerical simulation results on the moving type electrodynamic suspension (EDS) simulator and static type EDS simulator using high-Tc superconducting (HTS) levitation magnet. The levitation force of the EDS system is formed by the reaction between the moving magnet and the fixed ground conductor. The possible two ways to simulate the EDS system were simulated in this paper by using finite element method (FEM). The first way was the moving type simulator which consists of the fixed HTS magnet and the moving ground conductor. The second way was the static type simulator which consists of the fixed magnet, the fixed ground conductor and the ac current supply system. To verify the characteristics of high speed EDS system with the moving type simulator heavy, large and fast moving ground conductor is needed. The static type simulator can get the characteristics of the high speed EDS system by applying equivalent ac current to velocity, therefore it does not need large moving part. The static type EDS simulator, which can consist of an HTS magnet, the fixed ground conductor(s), an AC power supply and the measuring devices, also test the effect of the shape of the ground conductor easily. The plate type ground conductor made stronger levitation force than ring type ground conductor. Although the outer diameter 335 mm ring type ground conductor (Ring3) was larger than the outer diameter 235 mm ground conductor (Ring2), the levitation force by Ring2 was stronger than that by Ring3. From the calculation results on this paper, the consideration of the magnetic flux distribution according to the levitation height should be included in the process of the ground conductor design.

• 한국전자통신학회논문지
• /
• 제18권5호
• /
• pp.877-884
• /
• 2023

본 연구에서, 개인 차량이 주차할 수 있는 지정 공간 및 정의된 개인사용 시간에 다른 차량이 주차하여 있는 경우 초음파 물체 인식 센서를 활용하여 차량 진입을 파악하고, 그리고 카메라 센서가 번호판을 인식한다. 만일 개인 차량 소유자가 인정한 차량이 아닌 경우, 어플리케이션 서버의 "개인 주차장 운영 블록"은 경찰청의 차량 번호정보 조회 Open API를 근거로 개인의 전화번호를 받는다. 이후 주차 처리시 비권리권자는 주차 권리권자의 승인을 받아서 인정되는 시간만큼 주차를 하고 주차요금을 시청 공공 계좌에 입금한다. 본 연구를 통하여, 시청이 인정해준 개인 주차 공간에서 도심의 주차관리를 가장 효과적으로 할 수 있는 운영 처리 방법을 찾을 수 있었다.

• Clinical and Experimental Pediatrics
• /
• 제49권4호
• /
• pp.439-445
• /
• 2006

목 적 : ${\alpha}$-Galactosylceramide (GalCer)로 자극한 자연살상 T 세포(NKT)는 CD1d 및 T 세포 수용체(T cell receptor) 의존적으로 일부 백혈병에서 항암효과를 발현하나, CD1d음성인 신경모세포종에서는 세포독성을 유도할 수 없다. 이들 NKT세포의 활성화 시 분비되는 많은 양의 사이토카인의 직접적인 항암효과에 대해서는 소수의 보고가 있다. 본 연구에서는 hCD1d/${\alpha}$-GalCer tetramer로 NKT세포를 자극하여 얻은 상청액(supernatant)을 이용하여 NKT세포에 의한 신경모세포종의 치료적 접근의 가능성을 알아보았다. 방 법 : 신경모세포종 세포 주를 IMDM 배지에 배양하였고, NKT세포에서 분비되는 사이토카인 양은 cytometric bead array (CBA)분석으로 측정하였다. 세포 생존율은 calcein-AM 형광물질을 이용하여 digital image microscopy scanning (DIMSCAN)으로 측정하였고 특이 세포고사(specific apoptosis)는 annexin V and 7-AAD 염색 후 유식세포분석기를 통하여 산출하였다. 결 과 : 활성화된 NKT세포는 많은 양의 IL-2, IL-4, INF-${\gamma}$와 TNF-${\alpha}$을 분비하였다. NKT 자극 후 얻어진 상청액은 8개의 신경모세포종 세포 주 중 4개에서 의미있는 세포독성을 나타냈으며, 그 기전은 annexin-V 염색이나 pancaspase 억제제의 전 처치 실험으로 세포고사을 통하여 유도됨을 알 수 있었다. 그리고 이들 세포고사 유도는 anti-TNF-${\alpha}$, anti-IFN-${\gamma}$ 중화항체의 단독투여 시 현저히 감소하였고 동시투여 시에는 완전하게 억제되었다. 결 론 : NKT 세포의 활성화에 의해 분비된 IFN-${\gamma}$와 TNF${\alpha}$가 일부 신경모세포종 세포 주에서 협동적 세포 독성을 유도하였다.

• Journal of Biosystems Engineering
• /
• 제10권1호
• /
• pp.54-68
• /
• 1985

It is desirable to collect the solar thermal energy at relatively high temperature in order to minimize the size of thermal storage system and to enlarge the scope of solar thermal energy utilization. So far the concentrating solar collector has been developed to collect solar thermal energy at relatively high temperature, but it has some difficulties in maintaining the volumetric body of solar collector for long term utilization. On the other hand, the flat-plate solar collector has been developed to collect the solar thermal energy at low temperature, and it has advantages in maintaining the system for long term utilization, since it's thickness is thin and not volumetric. In this study, to develop a solar collector that has both advantages of collecting solar thermal energy at high temperature and fixing conveniently the collector system for long term period, a cylindrical parabolic concentrating solar collector was designed, which has two rows of parabolic reflectors and thin thickness such as the flat-plate solar collector, maintaining the optical form of concentrating solar collector. The characteristics of the concentrating parabolic solar collector newly designed was analysed and the results are summarized as follows; 1. The temperature of the air enclosed in solar collector was all the same as $50^{\circ}C$ in both cases of the open and closed loop, and when the heat transfer fluid was not circulated in tubular absorber, the maximum surface temperature of the absorber was $118-120^{\circ}C$, this results suggested that the heat transfer fluid could be heated up to $118^{\circ}C$. 2. In case of longitudinal installation of the solar collector, the temperature difference of heat transfer fluid between inlet and outlet was $4^{\circ}-6^{\circ}C$ at the flow rate of $110-130{\ell}/hr$, and the collected solar energy per unit area of collector was $300-465W/m^2$. 3. The collected solar energy per unit area for 7 hours was 1960 Kcal/$m^2$ for the open loop and 220 Kcal/$m^2$ for the closed loop. Therefore it is necessary to combine the open and closed loop of solar collectors to improve the thermal efficiency of solar collector. 4. The thermal efficiency of the solar collector (C.P.C.S.C.) was proportional to the density of solar radiation, indicating the maximum thermal efficiency ${\eta}_{max}=58%$ with longitudinal installation and ${\eta}_{max}=45%$ with lateral installation. 5. The thermal efficiency of the solar collector (C.P.C.S.C.) was increased in accordance with the increase of flow rate of heat transfer fluid, presenting the flow rate of $110{\ell}/hr$ was the value of turning point of the increasing rate of the collector efficiency, therefore the flow rate of $110{\ell}/hr$ was considered as optimum value for the test of the solar collector (C.P.C.S.C.) performance when the heat transfer fluid is a liquid. 6. In both cases of longitudinal and lateral installation of the solar collector (C.P.C.S.C.), the thermal efficiency was decreased linearly with an increase in the value of the term ($T_m-T_a$)/Ic and the increasing rate of the thermal efficiency was not effected by the installation method of solar collector.