• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.71-83
• /
• 2001

The purpose of this study was to Prove that the medial edge epithelial cells covering the secondary palatal shelves were removed by apoptosis during palatal fusion. 12 mature female rats (Suprague-Dawley) were mated overnight with male rats and sacrificed on days 15.0, 16.5, 16.75, 17.0 of pregnancy. The embryos were removed from the uterus and the heads were embedded in paraffin. The paraffin blocks were sectioned and the sections were undergone H-E staining for general histologic feature and TdT staining for detection of apoptotic cells. The obtained results were as follows. k. In the section of 16.0 and 16.5 day embryos, the palatal shelves were prior to contact and no apoptotic cells wereobserved in the medial edge epithelium. At the initial contact of Palatal shelves, there was a few apoptotic cells in the fusing epithelium. 2. In the 16.75 day embryos, the samples that epithelial seams did not lost there continuity, apoptotic cells were rarely seen at the midline epithelial seam. In contrast, a lot of apoptotic cells were observed at epithelial triangles and the junction between palatal shelves and nasal septum. 3. In the 16,75 day embryos, the samples that epithelial seams lost their continuity and disrupted to epithelial islands, large number, of apoptotic cells were observed at epithelial islands and epithelial triangles. Some apoptotic cells were also observed at the oral, nasal epithelium near the midline. 4. In the 17.0 day embryos, most of epithelial islands were disappeared and mesenchymal confluence was achieved. Apoptotic cells were rarely observed in the mesenchymal tissue which replaced epithelial islands, but there were some apoptotic cells at the epithelial triangles, oral and nasal epithelium. From the results of the study, it was revealed that medial edge epithelial cells of fusing palate were removed by apoptosis. Apoptotic cells were found mainly in the disappearing midline epithelial seam and the oral and nasal epithelial triangles at some late stages of palatal fusion.

• Journal of Magnetics
• /
• v.9 no.1
• /
• pp.17-22
• /
• 2004

We studied the magnetotransport properties of tunnel junctions with AlO and AlN barriers fabricated using microwave-excited plasma. The plasma nitridation process provided wider controllability than the plasma oxidization for the formation of MTJs with ultra-thin insulating layer, because of the slow nitriding rate of metal Al layers, comparing with the oxidizing rate of them. High tunnel magnetoresistance (TMR) ratios of 49 and 44% with respective resistance-area product $(R{\times}A) of 3 {\times} 10^4 and 6 {\times} 10^3 {\Omega}{\mu}m^2$ were obtained in the Co-Fe/Al-N/Co-Fe MTJs. We conclude that AlN is a hopeful barrier material to realize MTJs with high TMR ratio and low $R{\times}A$ for high performance MRAM cells. In addition, in order to clarify the annealing temperature dependence of TMR, the local transport properties were measured for Ta $50{\AA} /Cu 200 {\AA}/Ta 50 {\AA}/Ni_{76}Fe_{24} 20 {\AA}/Cu 50 {\AA}/Mn_{75}Ir_{25} 100 {\AA}/Co_{71}Fe_{29} 40 {\AA}/Al-O$ junction with $d_{Al}= 8 {\AA} and P_{O2}{\times}t_{0X}/ = 8.4 {\times} 10^4$ at various temperatures. The current histogram statistically calculated from the electrical current image was well in accord with the fitting result considering the Gaussian distribution and Fowler-Nordheim equation. After annealing at $340^{\circ}C$, where the TMR ratio of the corresponding MTJ had the maximum value of 44%, the average barrier height increased to 1.12 eV and its standard deviation decreased to 0.1 eV. The increase of TMR ratio after annealing could be well explained by the enhancement of the average barrier height and the reduction of its fluctuation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.1
• /
• pp.1-10
• /
• 1993

The purpose of this study was to evlauate the microleakage of 3 dentin bonding agents using different dentin pretreatment method under simulated physilogic pressure in cementing the porcelain laminate veneer. Noncarious 60 human maxillary molars were selected and randomly assigned to 4 groups of 15 each. The group with the margin placed on the enamel was classified as the control and the groups with the margin placed on root surface were subdivided into 3 groups according to the dentin bonding agents used. The group using All Bond 2 was classified as experimental group 1, the group using Scotchbond MP was classified as experimental group 2, and the group using Gluma was classified as experimental group 3. Roots were removed at 3mm below the cementoenamel junction, and reductions of the teeth for the porcelain laminate veneer were done on the mesial 1/2 of the buccal surface of each teeth. The pulp was extirpated and the pulp chamber was cleaned with 37% phosphoric acid for the patency of dentinal tubule. Under simulated physiologic pressure, porcelain laminate veneers were cemented to the teeth using each dentin bonding agent and luting cement. After cementation, all samples were stored at 36t in water for 24 hours and thermocycled for 1500 cycles, then immersed in 0.5% basic fuchsin solution and the teeth were sectioned longitudinally by using diamond saw and the extent of microleakage was measured. The following results were obtained, 1. Microleakage was observed in a few samples of control group but all the samples of experimental groups. 2. The control group showed the less extent of microleakage than the experimental groups. In experimental groups the experimental group 1 & the experimental group 2 showed similiar extent of microleakage and the experimental group 3 showed the greater extent of microleakage than other groups. Conclusively, practicing the porcelain laminate veneers in the clinic, although the margin of the porcelain laminate veneer should be placed on enamel, in the case that it is inevitable to place the margin of the porcelain laminate veneer on the root surface, it is recommened to use dentin bonding agents which use no dentin pretreatment or a dentin pretreatment which can leave the smear plugs.

• Journal of the Korean Vacuum Society
• /
• v.22 no.3
• /
• pp.156-161
• /
• 2013

We fabricated transparent conductive electrodes with silver (Ag) nanofibers by electrospinning process. Ag nanofibers have high aspect ratio and fused junctions which result in low sheet resistance. Electrospinning is a fast and efficient process to fabricate continuous one-dimensional (1D) nanofibers. Ag/polymer ink were prepared in polymer matrix solution by a sol-gel method. Then, Ag/polymer nanofibers precursors are heated at $200{\sim}500^{\circ}C$ in air for 2 h to eliminate partially the polymers. The topographical features of the Ag nanofibers were characterized by FE-SEM, and the electrical property was analyzed through I-V measurement system. Finally, optical property was measured using UV/VIS spectroscopy. The transparent conductive electrodes with Ag nanofibers exhibited a sheet resistance (Rs) of $250{\Omega}/sq$ at a transparency (T) of 83%. Transparent conductive films, contain the Ag nanofibers as conductive materials, have good electrical, optical, and mechanical properties. Therefore, it is expected to be useful for the application of flexible display in the future.

• Journal of Chest Surgery
• /
• v.20 no.3
• /
• pp.439-450
• /
• 1987

The arterial blood pressure response elicited by stimulating the peripheral afferent fibers of different groups and origins was studied in cats. Experimental animals were anesthetized with a-chloralose [60mg/kg] and artificially ventilated with a respirator. The lumbosacral spinal cord was exposed through a laminectomy and L7 ventral root was isolated. The sural, medial gastrocnemius and common peroneal nerves were also exposed in the hindlimb. The arterial blood pressure was monitored continuously while the exposed peripheral nerves and L7 ventral root were being stimulated. Then, spinal lesions were made on the dorsolateral sulcus area, dorsolateral funiculus and other areas at the thoracolumbar junction. The arterial blood pressure responses were compared before and after making spinal lesions. The following results were obtained. 1. The mean arterial blood pressure was elevated from 103*7.3 to 129*8, 1 [mean*S.E.] mmHg [p<0.001] during stimulation of the sural nerve with C-strength [1000T], 20Hz. Stimulation with Ad-strength, 1Hz resulted in the depression of the arterial pressure by 8 mmHg [p<0.01]. 2. Stimulation of the medial gastrocnemius nerve with Ad-strength did not elicit any significant change in arterial blood pressure. Stimulation with C-strength, 20 Hz induced a pressor response from 102*6.2 to 117*6.4 mmHg [p<0.01] while that with C-strength, 1Hz induced a depressor response from 104*6.1 to 93*4.9 mmHg [p<0.001]. 3. A pressor response by 56 [from 107*7 5 to 163*9.4] mmHg [p<0.001] was induced during stimulation of the common peroneal nerve with C-strength, 20Hz stimuli. Stimulation with A4-strength, 1Hz depressed the arterial blood pressure from 111~9.3 to 94*7.8 mmHg [P<0.005]. The activation of the ventral root afferent fibers with C-strength, 20 Hz stimuli induced a pressor response by 22 mmHg [from 115*9.4 to 137*8.6 mmHg] [p<0.001]. 4. The pressor response elicited during stimulation of the sural nerve was abolished by making lesions on the dorsolateral sulcus area bilaterally. With the medial gastrocnemius nerve, the pressor response had not been abolished completely by the dorsolateral sulcus lesions. The pressor response disappeared completely with addition of the bilateral dorsolateral funiculus lesions. 5. The depressor response induced by stimulation of the sciatic nerve with Ad-strength, 1Hz was decreased by making lesions on the dorsolateral funiculus. 6. From the above results it is concluded that the difference in the blood pressure responses to the activation of the muscular afferent and the cutaneous afferent fibers is responsible for the groups of afferent fibers and the spinal ascending pathways.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.8
• /
• pp.1167-1173
• /
• 2009

This study was conducted to evaluate the effects of providing fermented soy protein to weaned pigs on nitrogen balance and apparent fecal and apparent ileal digestibility (AID) of AA. Four weaned ((Yorkshire${\times}$Landrace)${\times}$Duroc) barrows (BW = 6.58${\pm}$0.98 kg), surgically fitted with a simple T-cannula approximately 15 cm prior to the ileo-cecal junction, were fed four diets according to 4${\times}$4 Latin square design. Diets were a basal diet supplemented with one of the following: 3% SDPP (spray dried plasma protein), 5% RBP (soy protein fermented by Lactobacillus spp.), 5% PSP (soy protein fermented by Aspergillus oryzae and Bacillus subtilis), and 2.5% RPP (2.5% RBP+2.5% PSP). No differences were observed in DM and N intakes among treatments. However, the level of urine excretion was greater in the RPP group than in the PSP group. Additionally, fecal DM excretion, fecal N concentration and fecal N excretion were increased in the RBP, PSP and RPP groups when compared with the SDPP group (p<0.05). Furthermore, total excretion was increased in the RPP group when compared with the PSP group (p<0.05). In addition, N absorption and the N absorption ratio were higher in the SDPP group than in the RPP group (p<0.05). Moreover, the DM and N digestibilities were lower in the RBP, PSP and RPP groups than in the SDPP group (p<0.05), and the ash and energy digestibilities were higher in the SDPP and RBP groups than in the PSP and RPP groups (p<0.05). However, no significant differences were observed in the DM, N, Ash, Ca, P or ileal digestibilities among treatments, although the energy digestibility was higher in the SDPP group than the RBP group (p<0.05). In addition, the apparent ileal digestibilities of essential amino acids (Arg, His, Iso, Leu, Lys, Phe, Thr, and Val) were significantly higher in the SDPP group than in the other groups (p<0.05), and the levels of Ala, Cys, Glu and Try were greater in the SDPP treatment group than the RBP, PSP and RPP groups (p<0.05). Additionally, the levels of Asp, Gly and Ser were higher in the SDPP group than the PSP and RPP groups, and the level of Pro was higher in the SDPP group than the RPP group (p<0.05). Finally, total non-essential amino acid and total amino acid digestibility were higher in the SDPP group than in the other treatments (p<0.05). Taken together, the results of this study indicate that animal protein is more bioavailable than plant protein. However, the N absorption ratio and ileal digestibility were found to be similar in the SDPP and RBP groups.

• Clinical and Experimental Pediatrics
• /
• v.45 no.3
• /
• pp.354-361
• /
• 2002

Purpose : Selective introduction of genes conferring chemosensitivity into proliferating tumor cells may be used to treat cancer. We first investigated the bystander effect of retrovirus-mediated gene transfer of herpes simplex virus thymidine kinase(HSV-TK) gene to murine neuroblstoma cell line(neuro-2a) in vitro and in vivo. Second, we examined the mechanism and its enhancement of the bystander effect in murine neuroblastoma. Methods : To investigate the bystander effect, we studied tumor growth and survival time after HSV-TK/ganciclovir(GCV) treatment in a syngenic A/J mouse neuroblastoma model by mixing various ratios of HSV-TK-expressing neuro-2a cells with wild type neuro-2a cells followed by GCV treatment. To investigate the mechanism of the bystander effect in murine neuroblastoma, immunohistochemistry using connexin 43, CD4 and CD8-specific monoclonal antibodies was analyzed. We studied whether IL-2-secreting neuro-2a cells(neuro-2a/IL-2) would potentiate the bystander effect. Results : A strong bystander effect was observed in vitro and in vivo. The bystander effect in murine neuroblastoma was dependent on the immune response rather than connexin-mediated gap junction. Neuro-2a/IL-2 treatment enhanced the bystander effect in the HSV-TK/GCV system in murine neuroblastoma model. Conclusion : We conclude that the bystander effect in murine neuroblastoma depends on immune response and is enhanced by neuro-2a/IL-2.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.2
• /
• pp.95-102
• /
• 2001

Nano-scale gate length MOSFET devices require extremely shallow source/drain eftension region with junction depth of 20∼30nm. In this work, 20nm $n^{+}$-p junctions that are realized by using this $As_{2}^{+}$ low energy ($\leq$10keV) implantation show the lower sheet resistance of the $1.0k\Omega$/$\square$ after rapid thermal annealing process. The $As_{2}^{+}$ implantation and RTA process make it possible to fabricate the nano-scale NMOSFET of gate length of 70nm. $As_{2}^{+}$ 5 keV NMOSFET shows a small threshold voltage roll-off of 60mV and a DIBL effect of 87.2mV at 100nm gate length devices. The electrical characteristics of the fabricated devices with the heavily doped and abrupt $n^{+}$-p junctions ($N_{D}$〉$10^{20}$$cm^{-3}$, $X_{j}$$\leq$20nm) suggest the feasibility of the nano-scale NMOSFET device fabrication using the $As_{2}^{+}$ low energy ion implantation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.5
• /
• pp.535-543
• /
• 2004

Purpose: The purpose of this study is to compare the effect of two fiber post systems and one metal cast post system on the fracture strength and fracture pattern of crowned, endodontically treated teeth with 2 mm-height of the reamining tooth structure. Materials and methods: A total of 36 recently extracted sound human mandibular premolars were selected Each tooth structure of the crown portion except 2mm-height of the one above the cementoenamel junction was removed. After being endodontically treated, they were randomly distributed into 3 groups: group 1, restored with quarts fiber post(D.T. Light-Post), group 2, with glass fiber post(FRC Postec), and group 3, metal cast post and core. All teeth were fully covered with nonprecious metal crowns. Each specimen was embedded in an acrylic resin block and then secured in a universal load-testing machine. A compressive load was applied at a 130 degree angle to the long axis of the tooth until fractured, at a crosshead speed 20mm/min. The highest fracture loads were measured and recorded as the fracture strength of each specimen. Fracture areas were measured on the mid-buccal and mid-lingual point from the crown margins. One-way analysis of variance and Turkey test were used to determine the statistic significance of the different fracture loads and areas among the groups (p<0.05). Results: The mean fracture loads were $1391{\pm}$425N(group 1), $1458{\pm}476N$(group 2) and $1301{\pm}319N$(group 3). The fracture loads among the three groups had no statistically signifiant difference (p>.05). The mean fracture area of the fiber post was closer to the crown margin than that of the metal cast post and core(p<.05). The metal cast post showed unrestorable and catastrophic fracture patterns. Conclusion: Within the limitations of this study, fracture loads with any statistically significant difference were not recorded for endodontically treated teeth restored with two fiber posts and the metal cast post. But teeth restored with the fiber posts typically showed the fracture pattern close to the crown margin, which was almost restorable.

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.15-25
• /
• 1994

Keratinized ginigva has clinical singificance in periodontal health because it plays important roles in resistance to mechanical trauma, to penetration of bacteria, and to tensional stress by muscle attachment. In order to investigate the width change of anterior keratinized gingvial during transitional period, the width of kerainized gingiva on anterior teeth was measured annually in elementary school children with deciduous dentition until the successive anterior teeth were completely erupted. The distance from the gingival margin on mid-portion of crown to mucogingival junction was measured by Boley gauge(Hu-Friedy, U.S.A.) and was recorded as the width of keratinized gingiva. The difference of the width of keratinized gingiva according to sex and dentition was analyzed statistically by Student t-test. Following results were obtained : 1. In deciduous dentition, it was shown that the width of keratinized gingiva on maxillary central incisors($3.28{\pm}0.83mm$) was the widest(p<0.01), and that on maxillary lateral incisors, mandibular central and lateral incisors was $2.69{\pm}0.86mm$, $2.51{\pm}0.71mm$, $2.43{\pm}0.68mm$, respectively. 2. In mixed dentition, it was shown that the width of keratinized gingiva on maxillary central incisors ($5.10{\pm}0.86$) was the widest(p<0.01), and that on maxillary lateral incisors, mandibular central and lateral incisors was $4.35{\pm}0.83mm$, $3.51{\pm}0.60mm$, $3.57{\pm}0.66mm$, respectively. 3. The width of anterior keratinized gingiva was significantly increased after the successive anterior teeth were completely erupted(p<0.001). The width of keratinized gingiva on maxillary central and lateral incisors, and mandibular central and lateral incisors was increased by $1.82{\pm}0.83mm$, $1.65{\pm}0.69mm$, $0.99{\pm}0.39mm$, and $1.14{\pm}0.98mm$, respectively. 4. There was no statistical significance in the difference of the width of anterior keratinized gingiva between male and female(p>0.05).