• Structural Engineering and Mechanics
• /
• v.77 no.1
• /
• pp.89-102
• /
• 2021

Rapid construction of prefabricated bridges requires minimizing the field work of precast members and ensuring structural stability and constructability. In this study, we conducted experimental and analytical investigations of transverse joints of prefabricated T-girder bridge superstructures to verify the flexural performance and serviceability. In addition, we conducted parametric studies to identify the joint parameters. The results showed that both the segmented and continuous specimens satisfied the ultimate flexural strength criterion, and the segmented specimen exhibited unified behavior, with the flexural strength corresponding to that of the continuous specimen. The segmented specimens exhibited elastic behavior under service load conditions, and the maximum crack width satisfied the acceptance criteria. The reliability of the finite element model of the joint was verified, and parametric analysis of the convexity of the joint section and the compressive strength of the filler concrete showed that the minimum deflection and crack width occurred at a specific angle. As the strength of the filler concrete increased, the deflection and crack width decreased. However, we confirmed that the reduction in the crack width was hardly observed above a specific strength. Therefore, a design suitable for prefabricated bridges and accelerated construction can be achieved by improving the joint specifications based on the required criteria.

• Journal of the Korean Society of Physical Medicine
• /
• v.7 no.3
• /
• pp.293-302
• /
• 2012

Background & Purpose : The purpose of this study is to evaluate the impairment of SVMC(selective voluntary motor control) of the lower extremity by assessing each joints of lower limb and to analyze the motional relationship between each joints of lower limb using SCALE(Selective Control Assessment of the Lower Extremity) during the swing phase of gait cycle in children with spastic diplegia. Method : 11 children with spastic diplegia CP who could walk independently and 10 normal developing children were participated. SCALE(Selective Control Assessment of the Lower Extremity) assessments were conducted for 11 children with CP. Gait analysis were accomplished in all participants. Qualisys motion analysis was used as a statistical tool to assess the motional relationship between hip joint, knee joint and ankle joint in each limb. We used descriptive statistics, cross-tabulation, independent t-test, linear regression to analysis motional relationship between each joints of lower limb using by SPSS ver.17.0. Result : Firstly, there were significant differences in SCALE scores between the cerebal palsy group and the control group in knee joint(p<0.05), but no significant difference in hip and ankle joints during the swing phase of gait cycle. Secondly, the difference of SCALE scores showed no statistical motional difference in knee and ankle joints during the swing phase, and showed significant motional difference in hip joints during the swing phase(p<0.05). Thirdly, there was a liner relationship between the motion of hip and ankle joints during the swing phase. Conclusion : The nature of SVMC(selective voluntary motor control) in each joints of the lower limb may reflect the ability of gait, thus SCALE may be used for assessing and for treating the cerebal palsy patients who are able to walk independently. Also we knew that the impairment of SVMC(selective voluntary motor control) increases from the proximal to the distal joints.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.6 s.58
• /
• pp.97-105
• /
• 2009

This study was conducted for the purpose of examinating the safety and economical efficiency of large high tension bolted joints. The specimen using F10T-M30 large high strength bolts has been selected and static tensile test has been conducted to evaluate the slip characteristics. In addition, finite element analysis has been carried out to estimate the number of required bolts. As a result, the average slip coefficient of M30 high strength bolts exceeded 0.4 - the standard in highway bridge design specification - and has satisfied the slip strength, which is the same as that of M22 high strength bolts. In addition, if F13T-M22 high strength bolts were applied, the number of required bolts decreased by 21%, and if F10T-M30 high strength bolts were applied, the number of required bolts decreased by 46%, that leads to the conclusion that the economical efficiency in accordance with diametering of high strength bolts was now verified.

• Imaging Science in Dentistry
• /
• v.43 no.4
• /
• pp.245-251
• /
• 2013

Purpose: This study was performed to evaluate the relationship between anterior disc displacement and effusion in temporomandibular disorder (TMD) patients using magnetic resonance imaging (MRI). Materials and Methods: The study subjects included 253 TMD patients. MRI examinations were performed using a 1.5 T MRI scanner. T1- and T2-weighted images with para-sagittal and para-coronal images were obtained. According to the MRI findings, temporomandibular joint (TMJ) disc positions were divided into 3 subgroups: normal, anterior disc displacement with reduction (DWR), and anterior disc displacement without reduction (DWOR). The cases of effusion were divided into 4 groups: normal, mild (E1), moderate (E2), and marked effusion (E3). Statistical analysis was made by the Fisher's exact test using SPSS (version 12.0, SPSS Inc., Chicago, IL, USA). Results: The subjects consisted of 62 males and 191 females with a mean age of 28.5 years. Of the 253 patients, T1- and T2-weighted images revealed 34 (13.4%) normal, DWR in 103 (40.7%), and DWOR in 116 (45.9%) on the right side and 37 (14.6%) normal, DWR in 94 (37.2%), and DWOR in 122 (48.2%) joints on the left side. Also, T2-images revealed 82 (32.4%) normal, 78 (30.8%) E1, 51 (20.2%) E2, and 42 (16.6%) E3 joints on the right side and 79 (31.2%) normal, 85 (33.6%) E1, 57 (22.5%) E2, and 32 (12.7%) E3 on the left side. There was no difference between the right and left side. Conclusion: Anterior disc displacement was not related to the MRI findings of effusion in TMD patients (P>0.05).

• Journal of Korean Physical Therapy Science
• /
• v.15 no.4
• /
• pp.27-34
• /
• 2008

Background: This study was designed to analyze Repetitive dorsiflexion exercises in ankles have effects on the active range of flexion and extension motion through lumbar, cervical spine and ankle, wrist joints. Methods: 30 female college students in their twenties who frequently wear high heels participated the number of the experimental group was 15 persons and the number of the control group was 15 persons. They did exercise at the physical therapy room in M college, from the 8th of March to the 11th of April 2007. The experimental group had used the model of dorsiflexion repetitive exercise three times per week, for 4 weeks, but the control group did not exercise at all. In the sagittal plane active ROM of the these spine and joints were measured before and after the experiment using a digital goniometer. The results of two groups were compared and analyzed using paired T-test. Results: The active range of flexion and extension motion of the vertebra(especially lumbar flexion) and distal joints were significantly different in exercise group(p<.05). Conclusion: The model of repetitive dorsiflexion exercise of the ankle joint had positive effects on improving the active range of flexion and extension motion of the lumbar vertebra and distal joints of limbs. The results suggest that the repetitive dorsiflexion exercise is useful and also effective therapy for improving motion in women usually wearing high-heel.

• Journal of Welding and Joining
• /
• v.25 no.2
• /
• pp.82-88
• /
• 2007

Sn-3.0Ag-0.5Cu lead fee solder was generally utilized in electronics assemblies. But it is insufficient to research about activation energy(Q) that is applying to evaluate the solder joint reliability of environmental friendly electronics assemblies. Therefore this study investigated Q values which are needed to IMC formation and growth of Sn-3.0Ag-0.5Cu/Cu and Sn-40pb/Cu solder joints during aging treatment. We bonded Sn-3.0Ag-0.5Cu and Sn-40Pb solders on FR-4 PCB with Cu pad$(t=80{\mu}m)$. After reflow soldering, to observe the IMC formation and growth of the solder joints, test specimens were aged at 70, 150 and $170^{\circ}C$ for 1, 2, 5, 20, 60, 240, 960, 15840, 28800 and 43200 min, respectively. SEM and EDS were utilized to analysis the IMCS. From these results, we measured the total IMC$(Cu_6Sn_5+Cu_3Sn)$ thickness of Sn-3.0Ag-0.5Cu/Cu and Sn-40Pb/Cu interface, and then obtained Q values for the IMC$(Cu_6Sn_5,\;Cu_3Sn)$ growth of the solder joints.

• Journal of Welding and Joining
• /
• v.6 no.4
• /
• pp.44-53
• /
• 1988

The mechanical strengths of buried lamellar tears located near the weld toe in the welded tee joints were evaluated in terms of the loss of load carrying capacity as a function of tear area. In static loading, the load carrying capacity was significantly reduced when tear intercepted over 10% of the cross-sectional area of the welded joints. However, the welded joints containing buried tears still failed at stresses over the yield strength of the base metal in the through-thickness direction in spite of the presence of tears up to 20-25% of the area. Fatigue strength of welded joints containing tears markedly reduced with increasing tear areas. Lehigh lamellar tearing test used in this study to produce speicmens was described in detail. The load carrying cpapacity in static loading was influenced by the reduction of supporting area whereas that in fatigue loading was influenced by the stress-concentration effects of lamellar tears and the reduction of supporting area. In bend tests, the pre-existing lamellar tears always grew up toward the weld toe. However, in fatigue loading, cracks grew up and down simultaneously form both the weld toe and the top of lamellar tears because of stress concentration. In fatigue loading, delaminations and decohesion of inclusion/matrix interface generated in multipass welds provided crack propagation paths and enhanced crack propagation because the tips of delaminations and deconhesios acted as stress raisers.

• Journal of Energy Engineering
• /
• v.14 no.2 s.42
• /
• pp.153-158
• /
• 2005

In order to investigate the short-term performance of polyethylene electrofusion joints, the mechanical tests and stress analysis have been conducted to the artificially defected weld joints. The defects of lack of fusion with a square-type were fabricated with 10, 20, 30, 40, 50, 60$\%$ size of the width of heat-ing wire zone, respectively. In this defect sires range, both tensile and bending test results showed the dependence of defect size to the electrofusion joints performance, but both sustained pressure and crush test results didn't. The numerical stress analysis results including the soil and internal pressures, tensile and bend-ing stresses clearly showed the dependence of fusion defect size. Based on both mechanical test and stress analysis results, the maximum acceptable defect size in polyethylene electrofusion joints is discussed.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.4
• /
• pp.9-15
• /
• 2008

Microstructure and contact resistance of the Au-Sn solder joints were characterized after flip-chip bonding of the Au/Sn bumps processed by successive electrodeposition of Au and Sn. Microstructure of the Au-Sn solder joints, formed by flip-chip bonding at $285^{\circ}C$ for 30 sec, was composed of the $Au_5Sn$+AuSn lamellar structure. The interlamellar spacing of the $Au_5Sn$+AuSn structure increased by reflowing at $310^{\circ}C$ for 3 min after flip-chip bonding. While the Au-Sn solder joints formed by flip-chip bonding at $285^{\circ}C$ for 30 sec exhibited an average contact resistance of 15.6 $m{\Omega}$/bump, the Au-Sn solder joints reflowed at $310^{\circ}C$ for 3 min after flip-chip bonding possessed an average contact resistance of 15.0 $m{\Omega}$/bump.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.4
• /
• pp.149-158
• /
• 2008

This article provides strength estimation of T-joint area which made of composite material. Inner and outer structures of medium range surveillance radar are all made of sandwich structure which is made with composite material(CFRP) and aluminum honeycomb core. Since the radar is voluminous and has very complex inner structure, the whole structure cannot be made as one piece. Therefore, usage of T-joints is inevitable. Since some of stress concentration areas were located around T-joint area, series of strength estimations were conducted. Three different configurations were tested to improve mechanical properties(primarily on strength). The results show an improvement on strength to meet calculated strength on stress concentrated T-joint area.