• Journal of Korean Academy of Nursing
• /
• v.29 no.6
• /
• pp.1294-1303
• /
• 1999

The purpose of this study was to develop a tool to assess the powerlessness and to measure the powerlessness of elderly. From the result of pre-test, twenty seven items were finally selected to survey the elderly's powerlessness. The questionnaires on the elderly's powerlessness were drafted so that such tool may be evaluated in accordance with the four point Likert Scale. The number of subjects is 1,150 with ages of 60 years or more and who live in a large city, a small and middle-sized city and a rural area. The subjects of the test and retest were 85 elderlies. Collected data were analyzed by utilizing SAS program with Cronbach's $\alpha$ and Pearson's correlation, factor analysis method and known group techniques, descriptive statics, t-test and ANOVA. The results from this study were summarized below:1. When the factor analysis method was applied for validity, the tool for powerlessness of elderly was separated into 5 factors: loss of self-confidence to deal with physical, emotional, social aspects of life; expulsion by others from meaningful human relate; perception that life is meaningless and time passes quickly; falling behind young people; being rejected by other people, having no influence on others. An application of the known group technique showed a significant difference with the result of the degree of elderly's powerlessness tools developed by the two groups, with illness and without. 2. In testing reliability, it was found that coefficient of test-retest was .9435(P<.0001) when the test-retest method was used as a test of stability, and that the alpha coefficient of internal consistency was .9141 over all items within the tool of elderly's powerlessness 3. In powerlessness of elderly, total mean is 2.8493. And in factor of powerlessness, the highest factor is falling behind young people (M=3.1713), the lowest factor is loss of self- confidence to deal with physical, emotional, social aspects of life(M=2.6080). 4. The results from the test for the degree of powerlessness, according to the subject's demographic variables, showed that there were significant differences between age, sex, marital status, educational level, religion, possession of house, job, monthly pocket money, health status, illness and a place of residence.

• Journal of KIISE
• /
• v.43 no.8
• /
• pp.910-918
• /
• 2016

A tensor is a multi-dimensional array that represents many data such as (user, user, time) in the social network system. A tensor generator is an important tool for multi-dimensional data mining research with various applications including simulation, multi-dimensional data modeling/understanding, and sampling/extrapolation. However, existing tensor generators cannot generate sparse tensors like real-world tensors that obey power law. In addition, they have limitations such as tensor sizes that can be processed and additional time required to upload generated tensor to distributed systems for further analysis. In this study, we propose TeT, a distributed tera-scale tensor generator to solve these problems. TeT generates sparse random tensor as well as sparse R-MAT and Kronecker tensor without any limitation on tensor sizes. In addition, a TeT-generated tensor is immediately ready for further tensor analysis on the same distributed system. The careful design of TeT facilitates nearly linear scalability on the number of machines.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.49-51
• /
• 1996

The z-transform method is a basic mathematical tool in analyzing and designing sampled-data control systems. However, since the z-transform method relates only the sampling-instants signals, another mathematical tool is necessary to describe the continous signals between the sampling instants. For this purpose the delayed and the modi fled z-transform methods were developed. The definition of the modi fled z-transform includes a sample in the interval [-T,0] of the original signal in its series expression, where the signal value is always zero for any physical system. From this reason one step skew of the time index always appears in its application formulas. This introduces an unnecessary operation and a gap in linking the mathematical formula and its physical interpretation. Considering the conceptual difficulty and application inconvenience, a method of using the advanced z-transform in analysis of sampled-data control systems is developed as a replacement of the modi fled z-transform. With one formulation of the advanced z-transform, now it is possible to relate both the signals of the sampling instants and those in between without any complication and conceptual difficulty.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.8 s.251
• /
• pp.873-879
• /
• 2006

To investigate applicability of the reference stress approach as simplified inelastic stress analysis to estimate local creep rupture, detailed finite element stress analyses of a T-piece pipe with different inner pressure and system loading levels are performed. The reference stresses are obtained from the finite element (FE) limit analysis based on elastic-perfectly-plastic materials, from which the local reference stress for creep rupture is determined from R5. The resulting inelastic stresses are compared with elastic stresses resulting from linear elastic FE calculations. Furthermore they are also compared with the stresses from full elastic-creep FE analyses. It shows that the stresses estimated from the reference stress approach compare well with those from full elastic-creep FE analysis, which are significantly lower than the elastic stress results. Considering time and efforts for full inelastic creep analysis of structures, the reference stress approach is shown to be a powerful tool for creep rupture estimates and also to reduce conservatism of elastic stress analysis significantly.

• Journal of radiological science and technology
• /
• v.44 no.6
• /
• pp.599-605
• /
• 2021

The International Electrotechnical Commission (IEC) 62494-1 has defined the exposure index (EI) that have a proportional relationship with the dose incident on the image receptor, and target exposure index (EI_T), deviation index (DI). In this study, an appropriate EI_T for skull radiography was established through the diagnostic reference level (DRL) and changes in DI were confirmed. Entrance surface dose (ESD) and EI were obtained using the computed radiography system displayed the EI as per IEC on console and skull phantom by experiment based on the national average exposure conditions announced in 2012 and 2019. And appropriate EI_T was established by applying the DRL in 2012 and 2019. As a results, the EI_T is changed according to the change in the DRL, and the exposure condition that becomes the ideal DI according to the change in the EI_T also has a difference of about 1.41 times. DRL is recommended to optimize the patient dose, however it is difficult to measure in real time at medical institutions whereas EI and DI are displayed on the console at the same time as exposure. When the EI_T is set based on the DRL and the DI is closed to an ideal value, it is useful as a patient dose management tool. Therefore, when the EI_T is periodically managed along with the revision of the DRLs, the patient dose can be optimized through the EI, EI_T and DI.

• Journal of Broadcast Engineering
• /
• v.15 no.2
• /
• pp.205-216
• /
• 2010

In this paper, a method of MPEG-2 Transport Stream (TS) multiplexing for Ultra HDTV (UHDTV) and its design and implementation as a SW tool is described. In practice, UHD video may be divided into several HD videos and each video is encoded in parallel. Therefore, it is necessary to synchronize and multiplex multiple bitstreams encoding each HD video for transmitting and storing UHD video. In this paper, it is assumed that 4 HD videos partitioning a UHD spatially are encoded as H.264/AVC and two 5.0 channel audios are encoded by AC-3. Therefore, 4 H.264/AVC elementary streams (ESs) and 2 AC-3 ESs is mainly considered in the TS multiplexing of UHD. For the carriage of H.264/AVC and AC-3 over MPEG-2 TS, PES packetization and TS multiplexing are designed and implemented based on the extended specification of the MPEG-2 Systems and ATSC (Digital audio compressed standard), respectively. The implemented UHD TS multiplexing tool emulates real time HW operation in the time unit corresponding to the duration of one TS packet transmission in a given TS rate. In particular, in order to satisfy the timing model, the buffers defined in the TS System Target Decoder (T-STD) are monitored and their statuses are considered in the scheduling of TS multiplexing. For UHD multiplexing, two kinds of multiplexing structures, which are UHD re-multiplexing and UHD program multiplexing, are implemented and their strength and weakness are investigated. The developed UHD TS multiplexing tool is tested and verified in terms of the syntax and semantics conformance and functionalities by using a commercial analyzer and real-time presentation tools.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2015

Safety critical systems require exhaustive verification of safety properties, because even a single corner-case fault can cause a critical safety failure. However, existing verification approaches are too costly in terms of time and computational resource required, making it hard to be applied in practice. In this paper, we implemented a tool for minimizing the size of the verification target w.r.t. verification properties to check, based on program slicing technique[1]. The efficacy of program slicing using our tool is demonstrated in a case study with a verification target Trampoline[3], which is an open source automotive operating system compliant with OSEK/VDX[2]. Experiments have shown enhanced performance in verification, with a 71% reduction in the size of the code.

• Journal of Digital Contents Society
• /
• v.16 no.6
• /
• pp.893-900
• /
• 2015

IMO has been proceeding in the maritime SQA for software quality is considered to be essential for the development of the introduction of the e-Navigation In order to ensure software quality, follow the prescribed procedures throughout the software development project and create the output as a result of executing the respective steps. This paper is introduced a case for applying to maritime software development using the tool that is capable of real-time monitoring and automated documentation. Also, It is discussed the improvement of procedures for applying the expected effects and maritime SQA for the tool utilization. The Development of customized tools for maritime SQA that is reflected an improved procedure for tool is the future goals.

• The KIPS Transactions:PartD
• /
• v.16D no.3
• /
• pp.339-352
• /
• 2009

There are a number of formal methods for distributed real-time systems in ubiquitous computing to analyze and verify the behavioral, temporal and the spatial properties of the systems. However most of the methods reveal structural and fundamental limitations of complexity due to mixture of spatial and behavioral representations. Further temporal specification makes the complexity more complicate. In order to overcome the limitations, this paper presents a new formal method, called Timed Calculus of Abstract Real-Time Distribution, Mobility and Interaction(t-CARDMI). t-CARDMI separates spatial representation from behavioral representation to simplify the complexity. Further temporal specification is permitted only in the behavioral representation to make the complexity less complicate. The distinctive features of the temporal properties in t-CARDMI include waiting time, execution time, deadline, timeout action, periodic action, etc. both in movement and interaction behaviors. For analysis and verification of spatial and temporal properties of the systems in specification, t-CARDMI presents Timed Action Graph (TAG), where the spatial and temporal properties are visually represented in a two-dimensional diagram with the pictorial distribution of movements and interactions. t-CARDMI can be considered to be one of the most innovative formal methods in distributed real-time systems in ubiquitous computing to specify, analyze and verify the spatial, behavioral and the temporal properties of the systems very efficiently and effectively. The paper presents the formal syntax and semantics of t-CARDMI with a tool, called SAVE, for a ubiquitous healthcare application.

• Proceedings of the KIEE Conference
• /
• 2004.07e
• /
• pp.126-129
• /
• 2004

This paper presents the way to analyze the static and dynamic characteristics of the Compound motor and 3 phase slip ring motor using VIS (Virtual Instrument System) and Agilent VEE, GUI(Graphics User Interface) tool. This method is composed of real time measuring of various characteristics, which can't measure using analog meter and analyzer, and presenting and analyzing the static and dynamic characteristics by table, which calculates the measured parameter. Also, this can apply to the various parts.