• 한국지구과학회지
• /
• 제40권6호
• /
• pp.639-653
• /
• 2019

본 연구의 목적은 수온-염분도를 분석하여 음속최소층을 유추하는 과정을 통해 과학영재들의 그래프 해석 능력과 해양의 물리적 개념 이해 정도를 살펴보는 것이다. 이에 과학영재학교에 재학 중인 3학년 총 106명의 영재학생을 대상으로 해양학 학술지에 게재된 수온-염분도를 이용하여 SOFAR (SOund Fixing And Ranging) channel의 깊이를 추정하는 논서술형 문항을 만들어 양적, 질적 분석을 수행하였다. 연구결과 수온-염분도를 해석, 모델링, 변환하는 등 과학영재마다 그래프를 분석하는 수준에서 차이가 나타났으며 수온, 염분, 밀도 등에 관한 대안 개념도 노출되었다. 본 연구 결과는 과학영재들의 그래프 해석 수준을 이해하고, 그 과정에서 나타난 대안 개념을 토대로 해양 분야 교수-학습 방법 개선 프로그램 및 그래프 분석과 관련된 소재 발굴을 위한 기초 자료를 제공할 것이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1847-1852
• /
• 2003

Ultrasonic motors have many excellent performances. A variety of ultrasonic motors has been developed and used as an actuator in motion control systems. However, this motor has nonlinear characteristics. Therefore, it is difficult to achieve the precise position control system incorporating with the ultrasonic motor. This paper describes a position control scheme for traveling-wave type ultrasonic motor using a pseudo-derivative control with feedforward gains (PDFF) controller designed by the coefficient diagram method (CDM). The PDFF control system satisfies both the tracking and regulation performances, which are the most important for the precise position control system. The CDM is shown to be an efficient and simple method to design the parameters of PDFF controller. The effectiveness of the proposed control system is demonstrated by experiments.

• 아시안잔디학회지
• /
• 제2권1호
• /
• pp.70-77
• /
• 1988

In order to determine and to reduce the differences between biochemical test method for the seed viability with T.T.C. (2, 3, 5. Triphenyl tetrazolium Chloride) reagent and germinator method, the topographical diagram of red colored formazan was carried out in 15-16 parts differences. From this resulted information, the classification of the typical staining reaction given for 3 species were derived into 3-4 parts for the germinable in normal seedling, the same as the following results. 1. Corn (Gram inaceae) * Entier embryo stained in bright red color. * Both extremities of scutellum unstained * Both extremities of scuttlium, coleorhiza and non-critial portions of radicle unstained. 2. Soybean (Leguminosae) *Seed completely stained in red color. *Minor unstained areas on cotyledons. *Extreme tip of radicle unstained; minor unstained areas on cotyledons 3. Radish (Cruciferae) *Seed completely stained. *Minor unstained areas on cotyledons. *Outer cotyledon mostly unstained: inner cotyledon completely stained Extreme tip of radicle unstained: large portion of outer cotyledon unstained.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1547-1550
• /
• 2005

ISB panel, inner structured of metal in two skin and bonded, has inner structures which have low relative density, stiffness and strength with low weight of make improvement for that purpose. A kind of Inner structures have various structure types. In this paper, we have studied the Forming Limit Diagram(FLD), thickness variation and stress strain to dimple structure of sheet by analysis of Dynaform and LS-Dyna.

• 소성∙가공
• /
• 제24권5호
• /
• pp.361-367
• /
• 2015

The forming limit diagram (FLD) is the most commonly used tool for evaluating of sheet metal formability in the manufacturing field as well as the finite element analysis (FEA)-based design process. Determination of the forming limits is considerably influenced by testing/measuring machines, techniques and conditions. These influences may cause a large scatter in FLD from laboratory to laboratory. Scatter is especially true when the ‘position-dependent method’, as is specified in most national and international standards, is used. In the current study a new ‘time-dependent method’ is proposed, which is to determine the forming limit strains more accurately and reasonably when producing a FLD from experimental data. This method is based on continual strain measurement during the test. The results are compared to those from the existing standardized methods.

• 한국초등과학교육학회지:초등과학교육
• /
• 제32권4호
• /
• pp.527-534
• /
• 2013

This study investigated elementary school teachers' understanding of the image formation by converging lens, pinholes camera, mirror and water. In each case teachers were asked to draw the ray diagram to indicate the position of the image. Teachers' ray diagrams were analyzed in accordance with the scientific process of image formation. Results of analysis showed that teacher's conceptions were classified into five levels for each situation. And most of the teachers were in level 3 and level 4 in each case. Because they had difficulties in the appling scientific conception(propagating path of light, diffused reflection from each object point, role of the eye, ray tracing) to finding location of image. Also most of teachers didn't know how to apply the law of reflection and refraction to each situation. The study finally discussed the teacher training program of the optical image.

• 환경영향평가
• /
• 제12권4호
• /
• pp.259-270
• /
• 2003

To investigate the water quality and the pollution state of lower Yeongsan river system, 38 water samples were taken from the main stream of the Yeongsan river, Gomakwon and Hampyeong streams of the system in dry and flood seasons, May and August, 2001. The Yeongsan river is typically natural in accordance with pH-& diagram. But the chemistry based on Piper's diagram indicates that the river is influenced by seawater. BOD increases as the sampling sites are approaching the downstream in Gomakwon and Hampyeong streams overwhelming WQS V grade of 12.40mg/l. T-N and T-P of the river are mainly loaded not in above branch streams but in the main stream of the river, which are caused by manure for farming, domestic animal discharges and life-sewage, in possible. Meanwhile, heavy metal contents are below WQS or not detect in whole water samples. So, it shows that the above river waters be polluted by not industrial but life/agricultural foul waters.

• 한국환경과학회지
• /
• 제11권9호
• /
• pp.881-895
• /
• 2002

Sediments and river waters form the channel of Hwasun-cheon were studied in sedimentological size and geochemical analyses of metallic elements for the purposes of identification of depositional environments and geochemical characteristics. The sizes of sediments are assigned to pebble to coarse sand in mean size and polymodal in distribution. And the sediments are poorly to very poorly sorted and positively skewed. According to the grain size distributions of the sediments, the Hwasun-cheon belongs to gravel-bed river on the basis of the grain size distribution of the sediments. The behaviors of metallic elements in the sediments mainly depend on not grain size distribution but the geology connected with geomorphological reliefs near the stream. Contamination indices(CI) of Zn, Cu and Pb are 2.83 to 6.96 with average 4.31 in the sediments. Hwasun-cheon is assigned to general stream type in accordance with water quality of physical factors and chemical characteristics by Piper's diagram. Though meaningful values of BOD, T-N, T-P were locally depicted near Masan-ri, Hwasun-eup and Jiseok-cheon areas, artificial metal concentration do not represent in the most area of the stream. Sediments and river water are considered that the relatively more or less high metallic contents in the stream are originated from coal mine and urban area.

• 천문학논총
• /
• 제27권4호
• /
• pp.285-286
• /
• 2012

We combine data from two all-sky surveys, the Swift/Burst Alert Telescope 22 Month Source Catalog and the AKARI Point Source Catalogue, in order to study the connection between the hard X-ray (> 10 keV) and infrared (IR) properties of local active galactic nuclei (AGN). We find two photometric diagnostics are useful for source classification: one is the X-ray luminosity vs. IR color diagram, in which type 1 radio-loud AGN are well isolated from other AGN. The second one uses the X-ray vs. IR color-color diagram as a redshift-independent indicator for identifying Compton-thick (CT) AGN. Importantly, CT AGN and starburst galaxies in composite systems can also be separated in this plane based upon their hard X-ray fluxes and dust temperatures. This diagram may be useful as a new indicator to classify objects in new surveys such as with WISE and NuSTAR.

• Structural Engineering and Mechanics
• /
• 제55권4호
• /
• pp.857-869
• /
• 2015

The aluminum 7075-T6 is known as an alloy widely used in aircraft structural applications, which does not exhibit strain rate sensitivity during dynamic compressive tests. Despite mechanical importance of the material, there is not enough attention to determine appropriate sample dimensions such as a sample diameter relative to the device bar diameter and sample length to diameter (L/D) ratio for dynamic tests and how these two parameters can change mechanical behaviors of the sample under dynamic loading condition. In this study, various samples which have different diameters of 31.8, 25.4, 15.9, and 9.5 mm and sample L/D ratios of 2.0, 1.5, 1.0, 0.5, and 0.25 were tested using Split Hopkinson Pressure Bar (SHPB), as this testing device is proper to characterize mechanical behaviors of solid materials at high strain rates. The mechanical behavior of this alloy was examined under ${\sim}200-5,500s^{-1}$ dynamic strain rate. Aluminum samples of 2.0, 1.5 and 1.0 of L/D ratios were well fitted into the stress-strain curve, Madison and Green's diagram, regardless of the sample diameters. Also, the 0.5 and 0.25 L/D ratio samples having the diameter of 31.8 and 25.4 mm followed the stress-strain curve. As results, larger samples (31.8 and 25.4 mm) in diameters followed the stress-strain curve regardless of the L/D ratios, whereas the 0.5 and 0.25 L/D ratios of small diameter sample (15.9 and 9.5 mm) did not follow the stress-strain diagram but significantly deviate from the diagram. Our results indicate that the L/D ratio is important determinant in stress-strain responses under the SHPB test when the sample diameter is small relative to the test bar diameter (31.8 mm), but when sample diameter is close to the bar diameter, L/D ratio does not significantly affect the stress-strain responses. This suggests that the areal mismatch (non-contact area of the testing bar) between the sample and the bar can misrepresent mechanical behaviors of the aluminum 7075-T6 at the dynamic loading condition.