• Journal of Environmental Science International
• /
• v.3 no.3
• /
• pp.229-239
• /
• 1994

By laying emphasis on the intermediate layer, water property distribution in the Northwest Pacific is studied using the hydrographic data obtained by Japan Meteorologica] Agency in the period from 1960 to 1986. The scattering of water type in T-S diagram is relatively small in the Kuroshio Region. Both the envelopes of saline side and of fresh side of the scattered data points shifts gradually from saline side to fresh side as the observation line moves from southwest to northeast. In the Mixed Water Region, the scattering of water type increases rapidly as the observation line moves north; The envelope of fresh cold side moves towards fresh cold side much faster than that of same side. The thermosteric anomaly value at the salinity minimum decreases as the observation line moves from north to south or southwest. This suggests that the water does not advect along the salinity minimum layer, but that the salinity minimun layer is understood as a boundary of two different waters aligned vertically. We defined the typical water masses for the Oyashio Water and the Kuroshio Water. The water mass below the salinity minimum layer may be created by isopycnal mixing of these two water masses with a fixed mixing rate. While, the water mass above the salinity minimum cannot be created simply by isopycnal mixing. The salinity minimum layer may be eroded from upper side due to active mixing processes in the surface layer, while the water of the salinity minimum layer moves gradually southward. This appears to give an explanation why the thermosteric anomaly value at salinity minimum decreases towards south.

• Journal of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.249-252
• /
• 2005

We present results of the velocity-resolved spectroscopy of the [Fe II] $\lambda$1.644${\mu}m$ emission toward outflow sources with the Subaru Telescope at the angular resolution of 0.apos;16 ${\~}$ 0.apos;5 arcseconds. The observed sources are L1551 IRS 5, DG Tau, HL Tau and RW Aur, which are located in the Taurus-Aurigae Molecular Cloud, one of the closest star forming regions (0.apos;1 = 14 AU). We were able to resolve outflow structure in the vicinity of the sources at a scale of a few tens of AU. The position-velocity diagram of each object shows two velocity components: the high velocity component (HVC: 200 - 400 km $s^{-l}$) and the low velocity component (LVC: 50 - 150 km $s^{-l}$), which are clearly distinct in space and velocity. The HVC may be a highly collimated jet presumed from its narrow velocity width and high velocity. The LVC, on the other hand, may be a widely opened disk wind inferred from its broad velocity width and low velocity. The spectrum taken perpendicular to the L1551 IRS 5 outflow at its base shows that the LVC has a spatially wide subcomponent, supporting the above interpretation. We demonstrated that the [Fe II] 1.644 $\mu$ spectroscopy is a very powerful tool for the studies of fast jets and winds that directly emanate from star-disk systems.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.1
• /
• pp.104-111
• /
• 2009

This paper shows the behaviors of macro- and micro-structures and mechanical properties for specimen's welding region welded by FSW. according to welding conditions with 5mm thickness aluminum 5083O alloy plate. It apparently results in defect-free weld zone in case traverse speed was changed to 32 mm/min under conditions of anti-clockwise direction and tool rotation speed such as 800 and 1250 rpm with tool's pin diameter of 5 ${\Phi}mm$ and shoulder diameter of 20 ${\Phi}mm$, pin length of 4.5 mm and tilting angle of $2^{\circ}$. The ultimate stress of ${\sigma}_T=331$ MPa and the yield point of 147 MPa are obtained at the condition of the travel speed of 32 mm/min with the tool rotation speed of 1250 rpm. There is neither voids nor cracks on bended surface of $180^{\circ}$ after bending test. The improvement of toughness after impact test was found. The lower rotating and traverse speed became, the higher were yield point, maximum stress and elongation(%) with the stresses and the elongation(%) versus the traverse speed diagram. Vickers hardness for cross section of welding zone were also presented. The typical macro-structures such as dynamically recrystallized zone, thermo-mechanically affected zone and heat affected zone and the micro-structures of the transverse cross-section were also showed. However, the author found out that the region of 6mm far away from shoulder circumference was affected by friction heat comprehensively, that is, hardness softened and that part of micro-structures were re-solid-solution or recrystallized, the author also knew that there is no mechanically deformation on heat affected zone but there are the flow of plastic deformation of $45^{\circ}$ direction on thermo-mechanically affected zone and the segregation of Al-Mg on nugget. The solid solution wt(%) of parent material as compared against of friction stir welded zone was comprehensively changed.

• Korean Journal of Environmental Biology
• /
• v.37 no.3
• /
• pp.299-308
• /
• 2019

The occurrence patterns of Acartia(Copepoda; Calanoida) species, A. erythraea, A. hongi, A. hudsonica, A. ohtsukai, and A. sinjiensis, were examined in the southern coastal waters of Korea in the summer in August 2012. The Acartia species had different spatial distribution according to environmental factors. A. erythraea showed higher density in a semi-closed bay (Gamak, Masan) where the dissolved oxygen was low (<2 mg L^-1). A. sinjiensis showed a high density in a semi-closed bay when the chlorophyll-a concentration was >2 ㎍ L^-1. A. ohtsukai showed a high density at water temperatures >26℃ and low salinity <30. A. hongi and A. hudsonica showed at water temperatures <27℃ and high dissolved oxygen (>5 mg L^-1). These results suggest that environmental factors (temperature, salinity, dissolved oxygen, and chlorophyll-a concentration) may affect the spatial distribution of Acartia species dominant in the southern coasts of Korea in summer.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.5
• /
• pp.548-554
• /
• 1985

This research is to find a means of reducing diesel engine combustion noise with none or minimum sacrifice of engine performance by investigating the influence of Cylinder Pressure Level(CPL). For this purpose, modified Wiebe's combustion function, considering the heat release curve as a combustion of both premixed and diffusive combustion portion, was exclusively used to obtain the indicator diagram and computer coeds were developed for the numerical analysis. Following are the results of this research. (1) CPL increases almostly with lag of ignition timing increasing .alpha. and decreasing. theta.$_{d}$, but at the crank angle with the maximal efficiency, CPL is independent of .alpha. and .theta.$_{d}$ with constant value of 200 dB especially at the low frequency. (2) For the constant ignition timing, the effects of .alpha. and .theta.$_{d}$ on CPL were the most significant at the frequency of about 1KHz and 300Hz respectively. (3) For the constant value of .alpha. and .theta.$_{d}$, CPL increases linearly with load but thermal efficiency increase very rapidly with maximum value of load Q$_{T}$=30-40 MJ/Kmol, then starts to decrease slowly. (4) The most effective way of reducing combustion noise without sacrificing thermal efficiency, is to decrease .alpha.. In the case of constant .alpha., there always exists a optimum value of .theta.$_{d}$ with respect to the various compression ratio.o..atio.o..

• The KIPS Transactions:PartD
• /
• v.12D no.7 s.103
• /
• pp.1071-1078
• /
• 2005

Use case modeling is a widely used technique for functional requirements analysis of business system but it is difficult to identify a use cases at the right level and use case specifications are too long and confusing. It is also hard to determine a functional decomposition Phases·s of use cases. Therefore customer doesn't understand the use cases. This paper is defining concept of the Information Structure Modeling(ISM) and analyzing business system for the customer's perspective. ISM is an efficient mechanism for analyzing user requirements and for Identifying objects in a business system using Attribute Structure Diagram which is a major tool of the ISM that describes user event. This paper is also to show how the classes are classified and derived as event-asset-transaction type in ISM. It provides a user-friendly approach to visually representing business model.

• Journal of Elementary Mathematics Education in Korea
• /
• v.21 no.4
• /
• pp.547-574
• /
• 2017

The purpose of analysis of foreign curriculums and textbooks is to aimed to get the implications for the revision of curriculum, publishment of textbooks and teaching mathematics. In this study, Common Core State Standards and its textbooks was analyzed. The U. S. doesn't have the national mathematics curriculum. So, it can be happen some problems: students' lower mathematical achievement, assessment policy, decision of teaching contents, etc. In 2010, Common Core State Standards was developed by states. Furthermore, The California Department of Education reshaped standards: CA-CCSSM. This study analyzed the contents of fraction in CA-CCSSM and its textbooks. Fraction has many concepts and methods and models in teaching process. This study analyzed the equal parts, introducing fraction concept, the types of fraction, equivalent fractions, comparison of fractions. The conclusions are as follows; The equal parts are the important concept of fraction and introduced in geometry area before teaching of fraction. CA-CCSSM aims to understand a fraction as a number on the number line and represent fractions on a number line diagram. There are some similarity and difference in mixed number, fractions as a division and ratio, equivalent fractions and comparison of fractions between Korean curriculum and textbooks and CA-CCSSM.

• Progress in Superconductivity and Cryogenics
• /
• v.26 no.2
• /
• pp.9-18
• /
• 2024

The current study deals with the possible interplay between superconductivity and spin density wave in two band model high temperature iron based superconductor (FeBSC) Ba_1-xNa_xFe₂As₂. The electron and hole bands in the presence of the inter-band interaction between the two bands is becoming a vital issue to deal with the high temperature physics of the iron-based superconductors. In this research work, a model Hamiltonian appropriate for the system under consideration has been developed and the temperature dependent Green's function technique has been employed to get the solution for the equations of motion constructed for the two band model high temperature FeBSC Ba_1-xNa_xFe₂As₂. By making use of the decoupling procedure, the equations of motion for the dependence of superconducting transition temperature (T_C) on spin density wave(SDW) order parameter (Δ_SDW) in the electron intra-band (Δ_sc(e)) , hole intra-band (Δ_sc(h)) and inter-band (Δ_sc(eh)) for Ba_1-xNa_xFe₂As₂ have been obtained. We have also obtained the expression for the dependence of spin density wave transition temperature(T_SDW) on Δ_SDW for Ba_1-xNa_xFe₂As₂. Using some plausible approximations and appropriate experimental values for the parameters in the obtained equations of motion, phase diagrams of T_C versus Δ_sc(e), Δ_sc(h) and Δ_sc(eh) are plotted. Furthermore, a phase diagram of T_SDW versus Δ_SDW is plotted for the material under consideration. Finally, using the above mentioned phase diagrams, the interplay between superconductivity and spin density wave in the two band model high temperature FeBSC Ba_1-xNa_xFe₂As₂ has been demonstrated to be a very distinct possibility. The agreement of the current finding with the experimental observations is quite commendable.

• Journal of Korean Society of Forest Science
• /
• v.58 no.1
• /
• pp.8-16
• /
• 1982

To study the comparison of aboveground biomass of paulownia coreana Uyeki of 6-year-old, located in Seongju of non-attacked forest and Ulsan of damaged forest by the air pollution were selected. Ten sample trees in Seongju district and seven trees in Ulsan selected taking account of DBH were measured for 16 trees in total within a $10{\times}10m$ experimental plot. The diagram of oven-dry weight distribution of stem, branch and needle for each 1m segment was constructed. The logarithmic regression equations between dry weight of each component and the two-variables, DBH and tree height, combined term were presented. IF the estimations are extended to a hectare area stand, it contains 47.49 tons of aboveground biomass in Seongju district and 19.05 tons of it in Ulsan. The annual net productions were 11.64 tons of above 2.29 kg/kg/yr in Ulsan and the efficiency of leaf to produce stem was 2.99kg/kg/yr in Seongju and 0.83kg/kg/yr in Ulsan.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.5
• /
• pp.474-483
• /
• 2015

In order to understand the seasonal change of phytoplankton as well as the effect of water physico-chemical parameters, we investigated 18 stations in coastal areas of the East Sea in February, May, August and November in 2009. The taxa of phytoplankton observed in this study were classified as 37 Bacillariophyceae, 22 Dinophyceae, 1 Euglenophyceae, 3 Dictyophyceae and 1 Cryptophyceae. Phytoplankton abundance ranged from $1.2{\times}10^3cells/L$ to $246.6{\times}10^3cells/L$(with a mean value of $24.8{\times}10^3cells/L$), the highest biomass was observed in May. The dominant species were Leptocylindrus danicus, Chaetoceros affinis, Pseudo-nitzschia pungens, Thalassionema nitzschioides and etc. Pearson's correlation co-efficient between phytoplankton abundance and other water parameters showed the positive relationships with pH, DO, Secchi-disk depth, and SS, the negative relationships with $SiO_2-Si$. Seasonal patterns of phytoplankton dominant species were affected by the characteristics of water masses based on T-S diagram analysis. In particular, phytoplankton distributional patterns were related with water temperature in May and salinity in August, respectively. According to the result of MDS(Multi-dimensional scaling) using the phytoplankton abundance and species composition, the spatial distribution of phytoplankton were characterized with Ganwon(Group A) and Gyeongbuk(Group B) at the coastal areas of Jukbyeon or Uljin.