• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.2
• /
• pp.18-23
• /
• 1992

Recently, SSPAs(Solid-State Power Amplifiers) with high linearity and efficiency replace TWTAs (Traveling-Wave-Tube Amplifiers) in satellite transponders. In this paper, a power amplifier with maximum output power is designed and constructed using GaAs FET(MGF-1302) as a test model for the development of SSPAs. For conjugate matching of input and output network, transimission lines and stubs are optimized using microwave CAD program, LINMIC+. Power amplifier is realized on the teflon substrate($\in$S1rT=2.45) with a bandwidth of 1GHz at a center frequency of 8GHz. Maximum stable gain of simulation and simulation and experimental result is obtained 9.23, 7.65 dB, respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.531-534
• /
• 1997

A design system of dies for hot extrusion of structural shapes such as Z' s, L' s, T' s, U' s and H' s from aluminum alloys was developed in this study. The developed design system of dies is based of established die design rule system. The design rules for die design are obtained from the handbooks, plasticity theories and relevant references. The environment of the system is AutoCAD and AutoLISP, the graphic programming language was used for the configuration of the system. This system includes five major modules such as section shape design module, die opening number module. die opening layout module, die correction module and die bearing design module that are used to determine design variables. This system would be used to design of dies for hot extrusion from aluminum alloys and widely used in manufacturing course..

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.397-400
• /
• 1999

As the result of enhancement of CAD, Design Automation and manufacturing technology, it's on the increasing complexity, integration ratio, data signals, and pin count to IC chips. This brings about difficulties of testing, and incresing test time. Now One of the most cost-consuming procedure as integration ratio increases is the testing step. In this paper, we propose a new method, “Efficient TP(test point) assignment algorithm” using “input grouping”, This is helpful method to reducing test length without losing fault coverage. Experimental results show that proposed method reduces test length remarkably and doesn't miss fault coverage, with low hardware overhead Increasing.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.5
• /
• pp.263-267
• /
• 2016

In this paper, we analyzed the electrical characteristics of NPT planar and trench gate IGBT after designing these devices according to design and process parameter. To begin with, we have designed NPT planar gate IGBT and carried out simulation with T-CAD. Therefore, we extracted design and process parameter and obtained optimal electrical characteristics. The breakdown voltage was 724 V and The on state voltage drop was 1.746 V. The next was carried out optimal design of trench gate power IGBT. We did this research by same drift thickness and resistivity of planar gate power IGBT. As a result of experiment, we obtain 720 V breakdown voltage, 1.32 V on state voltage drop and 4.077 V threshold voltage. These results were improved performance and fabrication of trench gate power IGBT and planar gate Power IGBT.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.2
• /
• pp.119-132
• /
• 1990

To design protection coordination for an electric power distribution system, an expert system is developed, using both the veteran expert's heuristics and the guide book for the distribution facility operation considering feeder configuration, service route, load characteristics fault current and load current. The expert system developed in this papaer determines the type of protective device(clearing current and sequence). The location and rating change of protective device in the old feeder is realized by using old database. Current(T-C) curves of various kinds of protective devices are stored in Knowledge Base (KB). The expert system is developed on a 32 bit personal computer using PROLOG, AutoCAD,dBASEIIIPLUS and FORTRAN. To compute the fault current and loadflow, FORTRAN is used.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.453-454
• /
• 2006

This paper describes a processing verification technique for developing about end-milling cutters. Developed software is processing verification module for manufacturing. By using cutting simulation method, we can obtain center points of finding wheel via Boolean operation between a grinding wheel and a cylindrical workpiece. The obtained CL data can be used for calculating NC data. After then, we can simulate by using designed grinding machine and NC data. This research has been implemented on a commercial CAD system by using the API function programming. The operator can evaluate the cutting simulation process and reduce the time of design and manufacturing.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.581-582
• /
• 2006

This paper presents an integrated machining error compensation method based on PNN(Polynomial Neural Network) approach and inspection database of OMM(On-Machine-Measurement) system. To efficiently analyze the machining errors, two machining error parameters are defined and modeled using the PNN approach, which is used to determine machining errors for the considered cutting conditions. Experiments are carried out to validate the approaches proposed in this paper. In result, the proposed methods can be effectively implemented in a real machining situation, producing much fewer errors.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.151-156
• /
• 2000

Delaunay triangulation is well balanced in the sense that the triangles tend toward equiangularity. And so, Delaunay triangulation hasn't some slivers triangle. It's commonly used in various field of CAD applications, such as shape reconstruction, solid modeling and volume rendering. In this paper, an improved Delaunay triangulation is proposed in 2-dimensions. The suggested algorithm subdivides a uniform grids into sub-quad grids, and so efficient where points are non-uniform distribution. To get the mate from quad-subdivision algorithm, the area where triangulation-patch will be most likely created should be searched first.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.305-311
• /
• 2005

The die development of the high-strength steel sheet has big difference on the formability compared with the general panels. Especially, the springback after stamping of the high-strength steel sheets shows big problem. In this study, for the die development of the high-strength steel sheets, write about examples reducing the lead time and the expense of the die development after CAD modification with the result of the springback analysis after finding the best design planning as several times stamping analysis.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.363-365
• /
• 2010

In this study, based on numerical map GIS-T Dataset build and by using ArcGIS Network Analysis emergency vehicle's reach time were analyzed. AutoCad using 1: 50,000 based on roads and hospitals of numerical map were creating a Polyline and Point and Network Dataset made using ArcCatalog. ArcGIS Analysis setting the interval for the period reached 3 minutes, 5 minutes, 15 minutes was set and then U-Turn was set to not allow because U-turn takes a long time to calculate and does not happen often on the real road. Intersection of the passage of time, considering that the emergency vehicles were set to 3 seconds. To expand by taking advantage of this facility on Vulnerable area will be used as base material. If we focus on analyzing the emergency activity to convert little data, To prepare for disaster and disaster will be able to use the materials.