• Journal of Magnetics
• /
• 제11권3호
• /
• pp.135-138
• /
• 2006

We studied local anodization on permalloy $(Ni_{80}Fe_{20})$ thin film with an atomic force microscope (AFM), which was performed by applying a voltage between the permalloy sample and conductive AFM tip. Comparing with anodization on Si (100) substrate, nano-structures on the permalloy thin film was fabricated with low processability.In order to improve the processability on the permalloy thin film, we used dot-fabrication method, thatis, a conductive AFM probe was kept at a position on the film during the anodization process.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.203-203
• /
• 2013

Low pressure plasmas play a key role in many areas including electronic, aerospace, automotive, biomedical, and toxic waste management industries, and the advantages of the plasma are well known the processing procedure is established. However, the insight behavior of the discharges remains a mystery, even though a simple geometry as capacitive discharges. In this work, we measured RF power dissipation in capacitively coupled plasma (CCP) at various experiment conditions with potential probe and RF current probe. Through the results, we will have a clearer view of the inner nature of the CCP.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.169-171
• /
• 2007

We studied the partial discharge detecting by sensing electromagnetic wave emitted from the partial discharge source in the HV Rotating Machine with the new prototype patch antenna sensor. In this study, we design new type of patch antenna based on microstrip technology and make many experiments of elaine testing compare with the existing HFCT and EM probe on stator winding of HV generator in the laboratory. This paper will mention comparison of experimental results based on the three kinds of sensors.

• Journal of Photoscience
• /
• 제12권1호
• /
• pp.25-32
• /
• 2005

Binding of N-Alkyl phenothiazines (NAP) to bovine serum albumin (BSA) was studied by spectroscopic methods.It was found that the phenothiazine ring common to all drugs makes major contribution to interaction. However, the nature of alkylamino group at position 10 influences the protein binding significantly. Stern-Volmer plots indicated the presence of static component in the quenching mechanism. The high magnitude of rate constant of quenching indicated that the process of energy transfer occurs by intermolecular interaction and thus the drug-binding site is in close proximity to tryptophan residues of BSA. Binding studies in presence of hydrophobic probe, 8-anilino-1-naphthalein-sulphonic acid showed that there is hydrophobic interaction between drug and the probe and they do not share common sites in BSA. Thermodynamic parameters obtained from data at different temperatures showed that the binding of NAP to BSA predominantly involve hydrophobic forces. The effects of some cations and anions common ions were investigated on NAP-BSA interactions. The CD spectrum of BSA in presence of drug showedthat binding of drug leads to change in the helicity of the protein.

• Journal of Periodontal and Implant Science
• /
• 제38권4호
• /
• pp.691-698
• /
• 2008

Purpose: Periodontal pathogens can invade the host tissue. Morphologic studies have revealed bacteria within the pocket epithelium, gingival connective tissues, alveolar bone, and oral epithelium. The objective of this study was to visualize and evaluate presence of Porphyromonas gingivalis and Tannerella forsythia in crevicular epithelial cells of periodontally healthy subjects and chronic periodontitis patients. Materials and Methods: A total of 666 crevicular epithelial cells in the samples obtained from 27 chronic periodontitis patients and 9 healthy volunteers were examined. Specific probes for P. gingivalis and T. forsythia and a universal probe for detection of all eubacteria targeting 168 rRNA for fluorescence in situ hybridization was used in conjunction with confocal laser scanning microscopy. Results: 98.99% of sulcular epithelial cells from healthy volunteers and 84.40% of pocket epithelial cells from periodontitis patients were found to harbor bacteria. P. gingivalis and T. forsythia were discovered more often in crevicular epithelial cells from periodontitis patients. Conclusion: P. gingivalis and T. forsythia can invade crevicular epithelial cells and intracellular bacteria may act as a source of bacteria for persistent infection.

• 한국안광학회지
• /
• 제4권2호
• /
• pp.105-111
• /
• 1999

PECVD 방법에 의하여 제작된 수소화된 비정질 탄소박막에서 측정 전압에 따른 전기전도도의 급격한 변화와 시간에 따른 전류의 이완 현상을 관측하였다. 이 현상은 Hammer 등에 의해 four-probe 측정과 샌드위치형 전극 시료에 대해서 측정한 것과 동일하였다. 본 연구에서는 "높은 전압에서 전자가 트랩에 포획될 확률이 작아진다"는 가정 하에서 정성적이지만 전기전도도의 측정 전압 의존에 관한 세 가지 현상이 비교적 잘 설명됨을 제시하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.126-130
• /
• 1995

$CdS_{1-x}Te_{1-x}$ polycrystalline thin films were fabricated from CdS and CdTe powder by co-evaporation method at $10^{-6}$ Torr. The Optimum evaporation condition was substrate temperature $T_{s}$=$150^{\circ}C$, evaporation time t=30 min. XRD spectrums indicated that the crystal structure chanced from zinc blonde (x$\leq$0.22) to wurtzite (x$\geq$0.96) through mixed structure (0.22$\leq$0.74) as composition value x increase to CdS. Conductive type was n-type by hot point probe method. van der Pauw method was not applicable for x<0,5 due to high hall voltages, Electrical resistivity and Hall carrier mobility were decreased as x increase, while Hall carrier concentration was increased. The optical bandgap of $CdS_{1-x}Te_{1-x}$ polycrystalline thin films measure d at R.T. had quardratic form and the bowing parameter was fitted as 1.98eV for theoretical value of 2.0eV. I-V characteristics of In/CdTe/$CdS_{x}Te_{1-x}$Au Schottky diodes showed that CdS-rich one had better forward characteristics than CdTe-rich one.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.287-290
• /
• 1989

Single-phase $YBa_2Cu_3O_{j-g}$ (YBC) ceramic samples were annealed at $700^{\circ}C$ under a flowing $O_2$ atmosphere for 0, 18, 36, 54 and 72. hours after sintering. The resistivities(p) and the critical current densities($J_c$) of the samples were measured in a temperature range 77 to 300 K by a four probe method, using silver paint contacts. The variations of the electrical properties with annealing time are explained in terms of flux pinning, percolation probability and randomness, and alignment of grains and twins.The anomalous increases in $J_c$ and $T_c$ observed in sample annealed for a relatively long time possibly due to alignment of grains and twins, may imply the occurrence of superconducting glass state in high-$T_c$ superconducting ceramic.

• 한국전기전자재료학회논문지
• /
• 제23권4호
• /
• pp.298-302
• /
• 2010

We investigated the resistance change behavior of SABiT (Samsung Advanced Bump interconnection Technology) technology-applied PCB (Printed Circuit Board) with the various bump sizes and fabrication conditions. Many testing samples with different bump size, prepreg thickness, number of print on the formation of Ag paste bump, were made. The resistance of Ag paste bump itself was calculated from the Ag paste resistivity and bump size, measured by using 4-point probe method and FE-SEM (Field Emission Scanning Electron Microscope), respectively. The contact resistance between Ag paste bump and conducting Cu line were obtained by subtracting the Cu line and bump resistances from the measured total resistance. It was found that the contact resistance drastically changed with the variation of Ag paste bump size and the contact resistance had the largest influence on total resistance. We found that the bump size and contact resistance obeyed the power law relationship. The resistance of a circuit in PCB can be estimated from this kind of relationship as the bump size and fabrication technique vary.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.834-838
• /
• 1996

The diagnosis of the plasma in the facing targets sputtering system was performed in mixture gas of Ar 0.18-0.0 Pa, Xe 0.0-0.18 Pa and $O_2$ 0.02 Pa by using Langmiur's probe and the effect of plasma-damage to surface smoothness and magnetic characteristics of Ba ferrite films was clarified. The electron density $N_e$ and the electron temperature $T_e$ were evaluated at the center of the plasma and at the neighborhood of the anode ring. $T_e$ decreased and $N_e$ increased with increase of $P_{Xe}$ at the center of plasma. For the measurement at the neighborhood of the anode ring, $T_e$ was almost constant and $N_e$ took the minimum value at $P_{Xe}$ of 0.1 Pa, where Ba ferrite films with excellent c-axis orientation and magnetic characteristics were obtained. It was suggested that the restriction of the bombardment of recoiled particles as well as the suppress of plasma-damage were effective for obtaining good surface smoothness and excellent magnetic characteristics and it was useful for decreasing the crystallization temperature of Ba ferrite films.