• Journal of Periodontal and Implant Science
• /
• v.28 no.4
• /
• pp.659-678
• /
• 1998

In the present study, oligonucleotide probes based on 16S rRNA were taken to investigate the diversity of oral spirochetes without culture method. This is the first study that revealed oral spirochetes of both presently cultivable and uncultured oral spirochetes in Korean adult periodontitis patients. Subgingival plaque samples were taken from diseased sites(probing depth ${\geq}6\;mm$, experimental group, n=116) and healthy sites(probing depth${\leq}3mm$, control 1 group, n=28) in 29 patients with adult periodontitis, and from 20 periodontally healthy subjects(probing depth${\leq}3mm$, control 2 group, n=100). Following being examined under phase-contrast microscope, all samples were submitted to dot-blot hybridization after polymerase chain reacton with eubacterial primers. 5 species-specific probes(TVIN, TDEN, TMAL, TSOC, and TPEC) and 7 group-specific probes(TRE I, TRE II, TRE III, TRE IV, TRE V, TRE VI, and TRE VII) were used one by one for the identification of both cultivable and so far uncultivable oral spirochetes. All probes were labeled with digoxigenin(DIG)-ddUTP and detected by chemilumininescence. The following results were obtained. 1. Under phase-contrast microscope, 91.37% and 14.28% of oral spirochetes were observed in the experimental and control 1 groups, respectively. None of oral spirochetes were observed in control 2 group. 2. With universal probe, 98.27%, 46.42%, and 22.0% of oral spirochetes were observed in experimental, control 1, and control 2 groups, respectively. 3. With specific probe, 95.68%, 35.71%, and 19.0% of oral spirochetes were observed in experimental, control 1, and control 2 groups, respectively. 4. With species-specific probes, T. socranskii were recovered in a high percentage of sites(81.89%) examined, followed by T. maltophilum(50.0%), T. vincentii(36.20%), T. denticola(13.79%), respectively. With group- specific probes, TRE IV was recovered in a high percentage of sites(85.34%) examined, followed by TRE II(77.58%), TRE I(56.89%), TRE III(25.86%), TRE VI(5.17%), and TRE V(2.58%), respectively. 5. T. vincentii were only observed in the diseased sites, not in the healthy sites. 6. Neither T. pectinovorum nor group VII oral spirochetes were observed in any sites. The findings warrant further investgations of the recovered spirochetes to elucidate the possible associations of oral spirochetal prevalence in race and types of periodontitis, pathogenesis of T. vincentii and the possible distributional change of oral spirochetes before and after treatments.

• Korean Journal of Agricultural Science
• /
• v.42 no.3
• /
• pp.183-189
• /
• 2015

Plant root penetration through soil profile is restricted by compacted layer such as plow pan under conventional tillage. For detecting the compact layer, we made a graduated T-shape probe and measured compared between the depths with rapid change in feeling hardness of hand penetration using T-shape probe and with a rapid increase of penetrometer cone index. On upland crops, including red pepper, corn, soybean and cucumber, plow pan depth ranged from 10 cm to 25 cm depth. The effective rooting depth (ER) had significant correlation with the plow pan depth (PP) except soils with the shallow ground water and/or poorly drained soil. The regression equation was ER = 0.9*PP ($R^2=0.54^{**}$, N = 14) with the applicative PP range of 10-25 cm.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.203-209
• /
• 2019

In this work, a new land-specific resistance measuring device (GM) and a measuring probe (Grounding Rod) are connected to the WENNER quadrant as power-line communication (PLC). In groups of two (P1,P2) probes, five to ten probes are installed in series on the ground at intervals of 1m, 2m, 4m, 8m, and 16m, respectively. If the PLC signal from the GMD is detected by the receiver of the Probe 1 (P1) for measurement, the minute voltage and current for measurement flow from the PSD (power supply) attached to the probe to the ground, and then, through the soil between P1 and P2, enters the Probe 1 (P2). The resistance value is then measured by the principle of voltage drop due to ground resistance. Measure the earth resistance every T seconds up to 1 trillion and store the measured data on the Arduino Server mounted on the main equipment. Stored measurement data can be derived from formulas by Ohm's Law and from inherent resistance (here,). Data obtained in real time will be linked to CDGES programs installed on Main PC, enabling data analysis and real-time monitoring of the ground environment on land. In addition, a three-dimensional display is possible with 3D graph support by identifying seasonal characteristics such as temperature and humidity of land (soils). The limitations of the study will require specific application measures of Test Bed for commercial access to a model that has been developed and operated experimentally.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.566-569
• /
• 2008

와전류탐상(ECT) Transmit-Receive 프로브를 이용한 ECT 방법은 센서코일의 유도기전력의 변화를 관찰하여 피검사체의 결함이나 특성의 변화를 탐지해내는 방법이다. ECT T/R 프로브는 여러 개의 Pancake 코일로 구성되어있고, 각각의 코일은 Transmit 코일과 Receive 코일로 나뉜다. 본 논문은 실제 TH 프로브 제작에 앞서 동일한 특성을 갖는 와전류센서를 설계 및 제작하여 그 특성을 파악하였다. 와전류센서에 인가되는 시험주파수와 Lift-off의 변화에 대한 특성을 파악하고 와전류센서의 임피던스값을 산출하여 정규화 임피던스도를 그려 와전류센서의 특성을 살펴보았다.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.613-616
• /
• 1998

In this paper, a model of a Eddy-current probe coil with a ferrite core in the presence of a half-space with a layer is developed. The half-space with a layer is accounted for by computing the appropriate Green's function by using Bessel transforms. Upon introducing equivalent Amperian currents within a core to explain effect to a impedance change in the coil due to a (ferrite) core, we derive a volume integral equation, The integral equation is transformed via the method of moments into a vector-matrix equation, which is then solved using a linear equation solver. Through the above processing, we computed impedance value in a Eddy-current probe coil due to a conductivity change of layer.

• Korean Journal of Microbiology
• /
• v.42 no.2
• /
• pp.89-94
• /
• 2006

The purpose of this study is to develop the strain-specific PCR primers for the identification of prevotella inter-media ATCC 49046 which is frequently used in the pathogenesis studies of periodontitis. The Hind III-digested genomic DNA of P. intermedia ATCC 49046 were cloned by random cloning method. The specificity of cloned DNA fragments were determined by Southern blot analysis. The nucleotide sequence of cloned DNA probes was determined by chain termination method. The PCR primers were designed based on the nucleotide sequence of cloned DNA fragment. The data showed that Pig6 DNA probe were hybridized with the genomic DNA from P. intermedia strains (ATCC $25611^T$ and 49046) isolated from the Westerns, not the strains isolated from Koreans. The Pig6 DNA probe were consisted of 813 bp. Pig6-F3 and Pig6-R3 primers, designed base on the nucleotide Sequences Of Pig6 DNA Probe, were 3150 specific to the only both P. intermedia ATCC $25611^T$ and P. intermedia ATCC 49046. In the other hand, Pig6-60F and Pig6-770R primers were specific to the only P. intermedia ATCC 49046. The two PCR primer sets could detect as little as 4 pg of chromosomal DNA of P. intermedia. These results indicate that Pig6-60F and Pig6-770R primers have proven useful for the identification of P. intermedia ATCC 49046, especially with regard to the maintenance of the strain.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.1
• /
• pp.68-76
• /
• 2000

A total of 290 pork loins were selected to include a wide variation of quality to investigate the quality categories into which most pork falls, selection criteria for these categories and methods to objectively assess ultimate pork quality. They were probed at 24 h postmortem (PM) for the following: A) light reflectance by Danish Meat Quality Marbling (MQM), Hennessy Grading Probe (HGP) and Sensoptic Invasive Probe (SIP); B) electrical properties by NWK LT-K21 conductivity (NLT) and Sensoptic Resistance Probe (SRP): and C) pH by NWK pH-K21 (NpH). Also, measurements of % drip loss (PDL) and filter paper wetness (FPW), color brightness (L*), ultimate pH (pHu), lipid content, subjective color (SC), firmness/wetness (SF) and marbling scores (SM) were assessed. Each loin was categorized as either pale, soft and exudative (PSE), reddish-pink, soft and exudative (RSE), reddish-pink, firm and non-exudative (RFN) or dark, firm and dry (DFD). Statistically comparing coefficients of determination (CD), the results indicated that overall, the HGP predicted quality groups slightly better than MQM (CD=71 and 62% respectively), NpH and SRP were less effective (CD= 56 and 44% respectively), and SIP and NLT had the lowest values (CD=36 and 5% respectively). Combining various independent variable did not greatly improve the variation accounted for. When the data was sorted into marbling groups based on lipid content, this was not accurately predicted by any of the probe measurements. The MQM probe remained the best predictor for marbling class and accounted for about 25% of the lipid content variation. This was slightly improved to 33% when pHu was combined with MQM.

• The Korean Journal of Nuclear Medicine
• /
• v.33 no.1
• /
• pp.100-109
• /
• 1999

Purpose: Preamplifier and amplifier are very important parts for developing a portable counting or imaging gamma probe. They can be used for analyzing pulses containing energy and position information for the emitted radiations. The commercial Nuclear Instrument Modules (NIMs) can be used for processing these pulses. However, it may be improper to use NIMs in developing a portable gamma probe, because of its size and high price. The purpose of this study was to develop both preamplifier and amplifier and measure their performance characteristics. Materials and Methods: The preamplifier and amplifier were designed as a charge sensitive device and a capacitor resistor-resistor capacitor (CR-RC) electronic circuit, respectively, and they were mounted on a print circuit board (PCB). We acquired and analyzed energy spectra for Tc-99m and Cs-137 using both PCB and NIMs. Multichannel analyzer (Accuspec/A, Canberra Industries Inc., Meriden Connecticut, U.S.A) and scintillation detectors (EP-047(Bicron Saint-Gobain/Norton Industrial EP-047 (Ceramics Co., Ohio, U.S.A) with $2"{\times}2"$ NaI(T1) crystal and R1535 (Hamamatsu Photonics K.K., Electron Tube Center, Shizuoka-ken, Japan) with $1"{\times}1"$ NaI(T1) crystal were used for acquiring the energy spectra. Results: Using PCB, energy resolutions of EP-047 detectors for Tc-99m and Cs-137 were 12.92% and 5.01%, respectively, whereas R1535 showed 13.75% and 5.19% of energy resolution. Using the NIM devices, energy resolutions of EP-047 detector for Tc-99m and Cs-137 were measured as 14.6% and 7.58%, respectively. However, reliable energy spectrum of R1535 detector could not be acquired, since its photomultiplier tube (PMT) requires a specific type of preamplifier. Conclusion: We developed a special preamplifier and amplifier suitable for a small sized gamma probe that showed good energy resolutions independent of PMT types. The results indicate that the PCB can be used in developing both counting and imaging gamma probe.

• Journal of the Korean Institute of Gas
• /
• v.5 no.3 s.15
• /
• pp.63-72
• /
• 2001

An alternating current (AC) corrosion using coupon and electric resistance (ER) probe has been studied. Coupon coupled with ER probe were applied in terms of AC voltage from high value to low value through the survey of AC voltages on buried gas transmission pipeline over the country. Parameters such as AC current density of coupon, AC voltage, cathodic protection potential, soil resistivity and frequency were monitored continually. Corrosion induced by AC was observed even under cathodically protected condition that met cathodic protection criterion (below -850mv vs. CSE). Corrosion rate was affected mainly not by AC voltage but by both of frequency and AC current density. An experimental corrosion rate relationship could be obtained statistically, In which AC corrosion rate increased linearly with effective AC current density and its slope was 0.619 in case of coupon and 0.885 in case of ER probe.

• Proceedings of the KSAR Conference
• /
• 2001.10a
• /
• pp.66-67
• /
• 2001

사슴의 예정시각 인공수정기술을 개발하기 위해 엘크 93 두에 대해 CIDR(InterAG, New Zealand)의 질내 14 일간 삽입방법으로 발정동기화처리하고 배란을 유기하기 위하여 제거시 PMSG(Folligon, Intevet, Holland) 200 IU(T₁) 또는 250 IU(T₂) 를 근육주사 한 후 60시 간에 Conceral/sup R/ 2㎖를 주사하고 인공수정 하거나, CIDR제거 후 24시간 때에 hCG(Folligon, Intevet, Holland) 500IU를 근육주사하고 12시간 후 (CIDR제거 후 36h) Receptal/sup R/ 2㎖를 주사하고 CIDR 제거 후 60 시간 때에 인공수정 (T₃) 하였으며, 수정 후 40일경에 초음파진단 (Sonovet-600, 6.5㎒ probe)으로 수태율을 조사하였다. (중략)