• Journal of Ocean Engineering and Technology
• /
• v.38 no.2
• /
• pp.43-52
• /
• 2024

Investigating ship motion under real conditions is vital for evaluating the seakeeping performance, particularly in the design process stage. This study examined the influence of the principal particulars of a trawler on its seakeeping performance. The wave conditions in the Bering Sea are investigated using available data. The length-to-beam (L/B) and beam-to-draft (B/T) ratios of the ship are changed by 10% for the numerical simulation. The response amplitude operator (RAO) motion, root mean square (RMS) value and sensitivity analysis are calculated to evaluate the influence of the trawler dimensions on ship motions. The peak RAO motion affected the ship motions noticeably because of the resonance at the natural frequency. The L/B and B/T ratios are important geometric parameters of a ship that significantly influence its RMS motion, particularly in the case of roll and pitch. The change in the B/T ratio has a good seakeeping performance based on a comparison of the roll and pitch with the seakeeping criteria. The present results provide insights into the seakeeping performance of ships due to the influence of the principal dimensions in the design stage.

• Journal of Biosystems Engineering
• /
• v.13 no.2
• /
• pp.46-50
• /
• 1988

The estimation of beam radiation intensity on a tilted surface is very important to the design of a solar energy system. In order to get the beam radiation intensity, it is required to calculate the ratio of the diffuse solar radiation to the global radiation ($k_d$). The data measured at Chung-Buk National University. Cheong-ju, (from May 16, 1985 to Nov, 10, 1987) were analysed to define the relationship between hourly clearness index ($k_t$) and diffuse ratio ($t_d$). The results are is follow: 1. The percent of clearness index($k_t$) of less than 0.3 and of more than 0.8 were 2.7% and 3.1% respectively, and between 0.5 and 0.8 was 76.5%. 2. The regression equation between $k_t$ and $k_d$ was an exponential function as: $$k_d=\[{1\hspace{120}:\hspace{10}(k_t<0.1)\\1.28{\times}0.074^{k_t}\hspace{30}:\hspace{10}(0.1{\leq}=k_t<0.9)\\0.12\hspace{98}:\hspace{10}(0.9{\leq}=k_t)$$ There was a little difference between the result. of this study based on the data of 30 months and the results of previous study (ITRA 2(1):42-47, 1986.) based on the data of 8 months. 3. The hourly exponential regression equation between $k_t$ and $k_d$ was $k_d=A{\times}8^{k_t}$ and the values of constant A and coefficient B of the: equations are as the following table; 4. The percent of $k_d$ of less than 0.4 was 72.9% and of more than 0.7 was 6.6%. 5. Total mean value of $k_t$ and $k_d$ wert 0.56 and 0.32, respectively. From 10:00 to 15:00 o'clock the total mean value of $k_t$ was smaller that the hourly man value of $k_t$ and the one or $k_d$ larger.

• Progress in Superconductivity
• /
• v.6 no.1
• /
• pp.19-23
• /
• 2004

YBCO do superconducting quantum interference device (SQUID) magnetometers based on bicrystal Josephson junctions on 10 mm ${\times}$ 10 mm $SrTiO_3$ substrates have been fabricated. The pickup coil of the device was designed to have 16 parallel loops with 50-fm-wide lines. We could obtain optimised direct coupled YBCO SQUID magnetometer design with field sensitivity $B_{N}$ $\Phi$/ of $4.5 nT/\Phi_{0}$ and magnetic field noise $B_{N}$ of about $22 fT/Hz^{1}$2/ with an I/f corner frequency of 2 Hz measured inside a magnetically shielded room. Preliminary results of magnetocardiograph measurement using the HTS SQUID magnetometers show signal to noise ratio of about 110, which is comparable to the quality of a commercial MCG system based on Nb-SQUIDs.

• Journal of Digital Contents Society
• /
• v.5 no.1
• /
• pp.28-34
• /
• 2004

In this paper, we have analyzed the block error probability of orthogonal multicarrier 16 QAM signal in a frequency selective Rician fading environment. The block error probability is evaluated with several parameters such as normalized propagation delay $(\gamma/T_S),$, bit energy to noise power ratio $(E_b/N_0),$ and desired signal to undesired signal power ratio (DUR) in fast fading and slow fading channels. In the fast fading channel, The result shows that the block error probability rather in the fast fading channel achieves better performance than in the slow fading channel, when the error correction capability is one or two.

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.318-321
• /
• 2016

As IoT industry are growing fast, The importance of power management system is also being magnified. CMOS High power-supply rejection ratio(PSRR) Low-dropout(LDO) regulator is achieved by the proposed ripple Subtractor, Feed-forward capacitor and OTA in this paper. The LDO is implemented in $0.18-{\mu}m$ CMOS technology. With the proposed structures, in the maximum loading of 40mA, Simulation result achieves PSRR of -73.4dB at 500kHz and PSRR better than -40dB when frequency is below 10MHz with $6.8-{\mu}F$ output capacitor.

• Journal of Environmental Science International
• /
• v.30 no.9
• /
• pp.709-717
• /
• 2021

This study evaluated the growth, physiological responses and productivity based on the intercropping ratio of cherry tomato (Lycopersicon esculentum L.) with basil (Ocimum basilicum L.). on the rooftops to determine out the efficient ratio in urban agriculture. From April to September 2019, an experiment was conducted on the rooftop of Konkuk University Glocal Campus. Cherry tomato and basil were selected as companion plants for eco-friendly urban agriculture on the rooftops. Each plot was created with a width of 100 cm, length of 100 cm, and height of 25 cm. After installing drainage and waterproof layers from bottom to top, substrate was laid out with a height of 20 cm. Intercropping ratio was consisted of a single tomato plant (TC), 2:1 tomato to basil (T₂B₁), 1:1 tomato to basil (T₁B₁), 1:2 tomato to basil 2 (T₁B₂), and a single basil plant (BC), were conducted using a randomized complete plot design with five treatments and three replication (a total 15 plots). Measurements were divided into growth, physiological responses, and productivity parameters, and detailed items were investigated and analyzed by classifying them into plant height, leaf length, leaf width, number of leaves, root length, root collar caliper, chlorophyll contents, fresh weight, dry weight, number of fruit, fruit caliper, fruit weight, and sugar content. Comparative analyses of cherry tomato with basil plants by intercropping ratio, growth, physiological, and productivity responses are determined to be efficient when the ratio of cherry tomato to basil ratio is 2:1 or 1:1.

• Journal of the Korean Magnetics Society
• /
• v.3 no.2
• /
• pp.135-138
• /
• 1993

Saturation rnagnetostriction and rnagnetoelastic properties of amorphous $Fe_{82}B_{18-x}Al_{x}$ and $Fe_{80}B_{20-x}Al_{x}$ alloys have been studied. Saturation magnetostriction of the alloys has increased according to the increase of AI content. The amorphous $Fe_{82}B_{14}Al_{4}$ alloy shows the highest saturation magnetostriction of 45 ppm among the alloy systems. The ratio of maximum magnetic induction change to tensile stress of this alloy is about $0.026\;T.mm^{2}/N$, and it is considered to be applicable for a high resolution mechanical sensor.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.17 no.2
• /
• pp.205-209
• /
• 2008

Impact of food plant on reproductive and commercial parameters in Antheraea mylitta, a polyphagous insect of economic importance was studied upon feeding the insect larvae on the same host plants for six continuous generations. A. mylitta larvae were fed upon Terminalia tomentosa, Terminalia arjuna and Zizyphus jujuba and restricted them to the same host plant for six generations to document the quantitative improvement in reproductive and commercial parameters. The parameters showed significant improvement in all the host plants studied over their respective controls. Fecundity among the reproductive parameters was highly improved than others (85.9% in T. tomentosa; 58% in T. arjuna and 49.7% in Z. jujuba). Likewise in commercial parameters, the shell weight in male showed the highest improvement (by 52.9%, 45.8% and 42.1% in T. tomentosa; T. arjuna and Z. jujuba respectively). On the other hand, the shell ratio percentage in female recorded the lowest improvement. The values for all characters were recorded a decline in T. arjuna and Z. jujuba fed ones over T. tomentosa, except that of shell ratio percentage in female has registered an increase in Z jujuba fed. The study thus revealed the comparative superiority of T. tomentosa over T. arjuna and Z. jujuba.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.4
• /
• pp.1-3
• /
• 2005

Superconducting $MgB_2$ fibers are in-situ grown by a diffusion method. The fibers are prepared by exposing B filaments to Mg vapor inside a folded Ta foil over a wide range of temperature and growth time. The materials are sealed inside a quartz tube by gas welding. The as - grown fibers are characterized by scanning electron microscopy and energy dispersive x - ray analysis. The fibers have a diameter of about $110{\mu}m$. Surface morphology of the fibers looks dependent on growth temperature and mixing ratio of Mg and B. Radial distribution of Mg ions into B is observed and analyzed over the cross - sectional area. Transport properties of the $MgB_2$ fibers are examined by a physical property measurement system. The $MgB_2$ fibers grown at $900^{\circ}C$ for 2 hours show a superconducting transition at 39.8K with ${\Delta}T_c<$ 2.0 K. Resistance at room temperature $MgB_2$ is 3.745 $\Omega$ and residual resistivity ratio (RRR) is estimated as 4.723.

• Journal of Advanced Marine Engineering and Technology
• /
• v.7 no.2
• /
• pp.15-21
• /
• 1983

Preparing for treatment and management of the emulsified fuel oil which will be generalized henceforth, this paper is an attempt to examine the viscosity-temperature characteristics of emulsified heavy fuel oil which is mixed with water and emulsifier in various mixture ratio by mechanical mixer. The experimental results are summarized as follows: 1. The viscosity-temperature characteristics of the emulsified C & B grade heavy fuel oil mixed with water of same or less weight, is changed according to log.log(v+0.6)=b-3.8log T. 2. The emulsifier has to be added to the emulsified A grade heavy fuel oil mixed with water of same or less weight, because it is instable. Especially if the emulsifier is sodium stearate, it is added more than 0.3% of the weight of oil and water. 3. In the emulsified A grade heavy fuel oil mixed with water and emulsifier, the higher the ratio of water addition becomes, the higher the viscosity is and the more the viscosity-temperature slope decreases. But the higher the ratio of emulsifier addition is, the more the viscosity-temperature slope increases. In this case, the linearity of viscosity-temperature characteristic curve is poorer than that of B and C grade heavy fuel oil. 4. In the emulsified A grade heavy fuel oil mixed with emulsifier of 0.3% or less, the emulsion type is O/W type when water addition ratio is 40%, but it is W/O type when it is 10%, 20%, 30% and 50%.