• Journal of the Korea Safety Management & Science
• /
• v.18 no.4
• /
• pp.81-90
• /
• 2016

Research and development activities have been actively conducted at universities, research institutions and research laboratories which belong to corporations. Because of blooming research and development activities in various fields, safety accidents in the laboratories happen consistently. The government office established Act on the establishment of safe laboratory environment to decrease safety accident rates and make environment of laboratories better, and it is effective slowly. However, in the case of laboratory safety management of the laboratory where various research and development activities are carried out. So it is difficult to closely monitor them. Even though safety inspections and periodic inspections is regularly conducted, these are focused on facilities and environment. According to a study of Dea-deok science town safety council, accidents in laboratories of 73% have arisen out of careless actions. Therefore, it is important for researchers to know to potential harmful factors in research. there is necessary to make a system to prevent laboratory accidents. The purpose of this study is that the researchers discovered potential hazard factors in laboratories. For that, foreign laboratory safety management systems has applied to domestic laboratories. Four laboratories in targeted institution has been selected to apply the appropriate personal protection equipments, job safety assessment and standard operating procedures. And I found the limitations of the process according to the excavations harmful factors in the research process. To overcome these limitations, Suggest a laboratory safety management system. This study discovered current laboratory safety system limitations and provides alternatives so that effective safety management can be achieved.

• Journal of the Korean Institute of Gas
• /
• v.10 no.4 s.33
• /
• pp.29-33
• /
• 2006

Estimation of process safety is important in the chemical process design. Prediction for flash points of flammable substances used in chemical processes is the one of the methods for estimating process safety. Flash point is the property used to examine the potential for the fire and explosion hazards of flammable substances. In this paper, multivariate statistical analysis methods(partial least squares(PLS) quadratic partial least squares(QPLS)) using experimental data is suggested for predicting flash points of flammable substances of binary systems. The prediction results are compared with the values calculated by laws of Raoult and Van Laar equation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.1
• /
• pp.23-33
• /
• 2018

In the general manual feeder of an LED lighting assembly system, many workers are needed to supply parts to the main conveyor. The automatic feeder for modern automation lighting assembly systems consists of a completely automated feeding system and a magazine system that supplies the parts automatically. A standardized LED panel and diffusion cover is stacked in the cartridge of the magazine system. The structural safety of the automatic feeding system with regard to handling the load from the panels and covers stored in the cartridge should be guaranteed. LED convergency lighting modules are assembled using two LED panels and one diffusion cover in an automatic feeder. In this study, the structural safety and fatigue life of the automatic feeder and magazine were analyzed by considering the load generated in the automatically assembled LED convergency lighting system. In addition, the dynamic behavior of each auto-feeding system and magazine delivery system was visualized, and the working process was evaluated via dynamic simulation using a virtual engineering method. A tack time table for automatic feeding systems was derived by developing a virtual prototype.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.136-144
• /
• 2021

Railroad Systems, which are national infrastructure industries, cause unexpected property and human damage if they fail to function while operating. Accordingly, railroad facilities supporting the railroad system are areas where high reliability and safety are required. However, it is time for systematic and scientific maintenance to be taken away from the traditional maintenance methods, as the nation's railroad facilities are now aging seriously. The purpose of this study was to secure the safety and reliability of the aging railroad communication facilities and to improve their performance. The research subjects were selected as a precision diagnosis process for railroad communication facilities, and improvement points were derived through detailed precision diagnosis process analysis. It is deemed that this study can contribute based on securing stability, improving reliability, and continuous improvement of railroad communication facilities should be conducted in the operation of the entire railroad system.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.3
• /
• pp.609-618
• /
• 2024

System reliability prediction in the development stage is increasingly crucial to reliability growth management to satisfy its target reliability, since modern system usually takes a form of complex composition and various complicated functions. In most cases of development stage, however, the information available for system reliability prediction is very limited, making it difficult to predict system reliability more precisely as in the production and operating stages. In this study, a system reliability prediction process is considered when the reliability-related information such as SIL (Safety Integrity Level) and MTTFd (Mean Time to Dangerous Failure) is available in the development stage. It is suggested that when the SIL or MTTFd of a system component is known and the field operational data of similar system is given, the reliability prediction could be performed using the scaling factor for the SIL or MTTFd value of the component based on the similar system's field operational data analysis. Predicting a system reliability is then adjusted with the conversion factor reflecting the temperature condition of the environment in which the system actually operates. Finally, the case of applying the proposed system reliability prediction process to a high performance mooring platform is dealt with.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.168-175
• /
• 2011

Construction accidents are major problem in Turkish Construction industry and especially fatally rates are very high. Current legislative system on occupational safety in Turkey enforces employers to implement safety measures as well as safety management systems. However level of consciousness in the industry is unsatisfactory and safety are perceived as extra cost and unnecessary expenditure. Moreover, especially in small residential building constructions which have a big share in the industry and unfortunately safety measures to mitigate or abate construction risks do not exist. The study focuses on small residential building construction sites and in the scope of this study, thirty building projects are examined. For each building project, project cost including labour and material costs, service and consultancy costs for mechanical, electrical systems as well as architectural and structural services, costs for supervision and finally general expenditures for construction site facilities were calculated. On the other hand, occupational safety costs for personal protective equipment, collective protective measures, consultancy and training were determined. Work breakdown structures were established and for each work item firstly occupational risks were evaluated and furthermore according to risk scores safety measures to be implemented were defined and related costs were calculated. The study gave results for total safety cost on average, in terms of percentage of total project cost (3.73% of total project cost), safety cost per man-hour (0.40 USD) and safety cost in terms of unit construction area (11.60 USD per square meter). Since safety management is a part of whole project management process, study gives suggestions and techniques to calculate safety costs and implement safety measures as a part of project management service for professionals. Authors believe that suggested approach may easily developed by the usage of more data to establish a model for estimation not only for building construction sites but also for all construction projects.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.2
• /
• pp.65-73
• /
• 2010

In an automated industry PLC plays a central role to control the manufacturing system. Therefore, fault free operation of PLC controlled manufacturing system is essential in order to maximize a firm's productivity. On the contrary, distributed nature of manufacturing system and growing complexity of the PLC programs presented a challenging task of designing a rapid fault finding system for an uninterrupted process operation. Hence, designing an intelligent monitoring, and diagnosis system is needed for smooth functioning of the operation process. In this paper, we propose a method to continuously acquire a stream of PLC signal data from the normal operational PLC-based manufacturing system and to generate diagnosis model from the observed PLC signal data. Consequently, the generated diagnosis model is used for distinguish the possible abnormalities of manufacturing system. To verify the proposed method, we provided a suitable case study of an assembly line.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.349-355
• /
• 2017

Failures of railway systems can result in train delays or accidents, and therefore high reliability is required to ensure safety of railway systems. To improve reliability, railway systems are designed with redundant systems so that the standby system will continue to function normally even if the primary system fails. Generally, overall system reliability can be evaluated by the reliabilities of the parts of the whole system and the reliability of the redundant system considering common failures in case of each system is not conform physical, functional and process independent. In this study, the reliability of the hot-standby sparing system is analyzed the independent systems and dependent systems with common failures. The reliability for the standby system can be effectively analysed using Markov models, which can model the redundant configuration and the state transition.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.10
• /
• pp.847-850
• /
• 2002

Stochastic process analysis is often based on Monte Carlo simulations. As a more rigorous alternative, a deterministic algorithm based on numerical integration is proposed in this paper. which calculates the probability distributions of dependent random variables using the results of simulation with grid points of independent random variables. For performance evaluation, the proposed algorithm is applied to an example problem which can be analytically solved. and the result is compared with that of Monte Carlo simulation. The proposed algorithm is suitable for general process simulation problems with a few independent random variables, and expected to be applicable to areas such as safety analysis and quality control.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.26 no.3
• /
• pp.24-30
• /
• 2003

As domestic buildings have been large-scaled, diversified and high-rise, there have been a consistent demand for design, development of construction technology and accident prevention activity as well as quality enhancement. In spite of governmental and related institutions' efforts for reducing national losses which come from numerous accidents, there have been endless small and large accidents on the construction site and thus, it is urgent to conduct empirical researches in this area. Currently safety supervision system in construction industry has enforced harm and danger prevention planning system, however it merely stick to other existing materials. In addition, it is difficult to put it into practice in that it requires bearing too much burden to draw out the planning itself in a case of large construction work. Consequently in this paper we select evaluation criteria by construction progress, classify into several categories, and regard potential danger which often occurs, as a evaluation criterion. Further step is to allow workers or collaborated companies to express their expert opinions or experiences and to encourage quality and process control and autonomous safety control by applying PSM(Process Safety Management) method using AHP(Analytic Hierarchy Process) and to development of PSM evaluation method in the construction. The reason why PSM method should be quantitative and substantial progress is because it contributes Korean constructing companies to enhancing their safety control ability and to taking an equal stance just like developed countries, thereby strengthening their competitive edges. Boost of safety control system by PSM method could make an enormous contribution to preventing construction accidents on the site by establishing and securing an autonomous safety control system.