• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2200-2202
• /
• 2004

This paper deals with the design of the Control Cabinet in Control Rod Control System(CRCS), using a domestic Distributed Control System(DCS) developed to localize the instrumentation and control(I&C) system for nuclear power plant(NPP). There are many parts developed by domestic skill and being operated successfully in NPP, but the development of I&C system as an essential part has been slow in progress. We will show the great possibility of developing our own I&C system by applying this domestic DCS to nuclear I&C system and confirming its successful operation, in this paper.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.285-288
• /
• 2004

In this paper, we present a design and experiment of PCI Express core verification model. The model targeting Endpoint core based on Verilog HDL is designed by newly-emerging SystemC, which is a new C++ class library based system design approach. In the verification model, we designed and implemented a SystemC host system model which acted as Root Complex and device driver dedicated to the PCI Express Endpoint RTL core. The verification process is scheduled by scenarios which are implemented in host model. We show that the model is useful especially for verifying the RTL model which has dependencies on system software.

• Analytical Science and Technology
• /
• v.7 no.3
• /
• pp.339-347
• /
• 1994

A multicolumn system consisted of two valve(10-port and 6-port valve)-three column (28% DC 200, SP 1700 and Chromosorb 102 column) was developed. Nine natural gas components composed of $N_2$, $CH_4$, $CO_2$, $C_2H_6$, $C_3H_8$, $i-C_4H_{10}$, $n-C_4H_{10}$, $i-C_5H_{12}$ 및 $n-C_5H_{12}$ completed all the baseline separation within 18 minutes. The accuracy and the precision of this system was tested. The retention times and the peak areas were determined with a repeatability between 0.02 and 0.16%, and less than 1%, respectively. Calibration curves for natural-gas components were plotted by the partial pressure injection method of pure gases, and good linear relationships for each component were presented. By using these calibration curves the accuracy of the multicolumn system compaired with that of the single column system for a certified standard gas of natural gas. As a result, relative error in the single and the multicolumn system was less than 0.5% and 0.04%, respectively. The result of application of this system in the analysis of importing LNG composition showed that the heating values calculated by the multicolum system were estimated lower compared with those calculated by the single column system and consequently, the importing price of LNG was able to be cut down.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1484-1490
• /
• 2009

Since the cooling performance of a $CO_2$ cooling cycle is varied significantly with a variation of refrigerant charge amount and outdoor temperature, the reliability of $CO_2$ system is down. In this study, the performance characteristics of three kinds of $CO_2$ systems were measured and analyzed by varying refrigerant charge amount and outdoor temperature so as to study the characteristics of variation with cycle option. The applied system options are the single-stage compression(1C-1E) system, two-stage compression with 1-EEV(2C-1E) system, and two-stage compression with 2-EEV(2C-2E) system. The performances of two-stage compression with 2-EEV system were less sensitive than those of other systems and the system operated safely and steadily for wide charge amount. The performance of the two-stage compression with 1-EEV(2C-1E) system was the most sensitive to the charge amount, and that of the single-stage compression(1C-1E) system varied a lot with outdoor temperature.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.4
• /
• pp.31-40
• /
• 2019

This paper proposes an adaptive PCIe system for TI C66x DSPs. Conventionally, the PCIe system provided by the C66x is a system dependent on the structure in which the primary core writes an application to the DSP memory through the PCIe interface, then activate the secondary core. Due to the dependency between the cores, when developing a project using a PCIe interface, the remaining cores have to be programmed with a concern of the primary core used as the PCIe interface. Therefore, in order to de-couple the connections among the cores, an adaptive PCIe system is proposed, in the paper, in which the cores operate independently compared to the conventional system. Since the core used as the PCIe interface only runs PCIe related operations in the new system, the remaining cores can be fully utilized without concerning the connections with the core for PCIe interface. In order to verify the feasibility of the proposed adaptive PCIe system, the implementations of LTE-A down link, and IEEE 802.11ac are carried out using the evaluation board which includes a TMS320C6670 chip. Altogether, these results support that we demonstrated that the digital signal processing systems with the PCIe Interface can be developed more rapidly by applying the proposed system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.834-837
• /
• 2003

In this study, Ohmic contacts make on 3C-SiC using TiN. Ohmic contact resistivity of TiN/3C-SiC was evaluated. Specific contact resistance was calculated by Circular-TLM(transmission line model) method and physics properties were measured using XRD, SEM, respectively. TiN contact is stable at high temperatures and a good diffusion barrier material. The TiN/3C-SiC contacts are thermally stable to annealing temperatures up to $1000^{\circ}C$. The TiN thin-film depostied on 3C-SiC substraes have good electrical properties. Therefore, the TiN/3C-SiC contact can be usefully applied for high-temperature MEMS applications over $500^{\circ}C$.

• Journal of Korea Multimedia Society
• /
• v.10 no.11
• /
• pp.1446-1459
• /
• 2007

This paper presents and analyzes a novel technique that makes it possible to improve the performance of low-end embedded systems through SoC(System-on-a-Chip) platform supporting dynamic cooperation between hardware and software modules. Traditional embedded systems with limited hardware resources have the poor capability of carrying out multi-tasking jobs including complex calculations. The proposed SoC platform, which provides dynamic cooperation between hardware and software modules, decomposes a single specific system into tasks for given system requirements. Additionally, we also propose a technique for efficient communication and synchronization between hardware and software tasks in cooperation with each other. Several experiments are conducted to illustrate the application and efficiency of the proposed SoC platform. They show that the proposed SoC platform outperforms the traditional embedded system, where only software tasks run, as the number of memory access is increased and the system become more complex.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.461-467
• /
• 2020

Most civilian positioning systems in use are based on the Global Navigation Satellite System (GNSS), which receives signals from satellites and calculates the current location. After the successful establishment of GPS from the U.S., GNSS has led to promote satellite navigation systems in various countries. Recently, China has succeeded in the radical development of its own GNSS, the BeiDou Navigation Satellite System (BDS), based on its advanced IT technology and funding power. Considering that China is rapidly expanding the service area of BDS to the world, systematic research on BDS is also required in Korea. Therefore, this paper provides overall information on B1C, the open signal of BDS, so that this information can be utilized in the design of B1C signal system and BDS B1C receiver design.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.1
• /
• pp.127-140
• /
• 2009

COMS DATS C&M software is an integrated management system providing control and monitoring functionalities for COMS IDACS (Image Data Acquisition and Control System). DATS C&M S/W consists of a system management module, a control and monitoring module, a data management module, and a trend analysis module. COMS SOC is supposed to operate IDACS as a backup of MSC. Especially, for the backup operation, the control and monitoring module of DATS C&M S/W is designed to support the synchronization of the two IDACS systems. This paper describes design, implementation, and result of development of DATS C&M S/W.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.4
• /
• pp.13-24
• /
• 2016

Defense Acquisition Program Administration's weapon system software development and management guideline specifies the criteria of software reliability tests including static and dynamic tests mainly on C/C++ languages. Recently, Defense Acquisition Program Administration expanded the scope of software reliability test for the various languages including C#, java etc. but specific criteria for them are not established. This study suggests the reliability test procedures and standards on C# programming software in weapon system. For the static test, considering the nature of the C# which depends on .NET framework, this paper introduces applying coding rules recommended by Microsoft Corp. Visual Studio 2012. Block coverage provided by Visual Studio is applied on dynamic tests and the achievement objectives for block coverage according to the software levels(A, B, C) are suggested. Also, the software reliability test procedures and standards proposed by this paper are properly verified through the case study. The result of this study can be used for establishing the specific criteria of the software reliability test for C# programming software in weapon system.