• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.7
• /
• pp.551-556
• /
• 2003

The present study concerns an experiment on the heating characteristics of a system air-conditioner (A/C) using PWM method or inverter method at low temperature con-ditions. The compressors used are digital scroll type and BLDC inverter type. Under the low outside temperature condition, -5$^{\circ}C$, -1$0^{\circ}C$, -15$^{\circ}C$, heating capacities and COPs are mea-sured by the psychometric calorimeter using air enthalpy method. Also, outlet air temperatures at heating operation mode are measured at -5$^{\circ}C$, -1$0^{\circ}C$ and -15$^{\circ}C$. Experimental results show that COPs of the system A/C using a PWM method are more effective than those of the inverter method at heating operation mode. Although the heater is on, COPs of PWM method are similar to those of BLDC inverter method. Moreover, the heating capacities of PWM method at -5$^{\circ}C$, -1$0^{\circ}C$ and -15$^{\circ}C$ are larger about 10~20% and outlet air tempe-rature at -15$^{\circ}C$ is larger about 10%, compared to the inverter method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.2
• /
• pp.188-193
• /
• 2010

With GPS being the primary navigation system, Loran use is in steep decline. However, according to the final report of vulnerability assessment of the transportation infrastructure relying on the global positioning system prepared by the John A. Volpe National Transportation Systems Center, there are current attempts to enhance and re-popularize Loran as a GPS backup system through the characteristic of the ground based low frequency navigation system. To advance the Loran system such as Loran-C modernization and eLoran development, research is definitely needed in the field of Loran-C receiver signal processing as well as Loran-C signal design and the technology of a receiver. We have developed a set of Matlab tools, which implement a software Loran-C receiver that performs the receiver's position determination through the following procedure. The procedure consists of receiving the Loran-C signal, cycle selection, calculation of the TDOA and range, and receiver's position determination through the Least Square Method. We experiences the effect of an incorrect cycle selection and various error factors (ECD, ASF, sky wave, CRI, etc.) from the result of the Loran-C signal processing. It is apparent that researches which focus on the elimination and mitigation of various error factors need to be investigated on a software Loran-C receiver. These aspects will be explored in further work through the method such as PLL and Kalman filtering.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.1
• /
• pp.20-29
• /
• 2013

Medical errors such as adverse drug event, improper transfusion, wrong-site surgery, mistaken patient identity and so on commonly occur at health care practice. Information technology, like Drug Utilization Review(DUR) system which reviews, analyzes, and interprets medication data when prescribing, can play a key role in reducing such medical errors and improving patient safety. Korean Government has guided all hospitals to implement concurrent DUR(cDUR) system, which is the first case worldwide in that all healthcare providers have to use cDUR system when prescribing. This paper introduced a case study that a tertiary hospital has integrated the cDUR system into its comprehensive Hospital Information System(HIS) and analyzed the whole prescription data during a week right after adoption of cDUR system. Considering technical strength and weakness, the cDUR system was integrated into the HIS, using Broker Servers for minimizing doctors' anxiety. As the quantitative analysis of the whole prescription data, DUR conflict events, which mainly included duplicate medications and contra-indicated drug interactions for outpatients, were 2.77%. Although only 0.7% is for the contra-indicated drug interactions, it will be greatly devoted to achieve the purpose of DUR such as improving patient safety.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.243-244
• /
• 2013

This paper introduces the application of Profibus field bus communication in HVDC power system. Discusses about the configuration of HVDC system and the structure of control and protection system. Analyzes and designs the network configuration of field device level. Using OPAS engineering tool to config IO system and at the same time monitor data in SCADA HMI.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.3
• /
• pp.409-421
• /
• 2012

Ethanolamine (ETA) is mainly used to prevent corrosion of pipe in secondary cooling system of nuclear power plant. Condensed ETA in wastewater could increase COD and T-N when it was emitted to natural water system. Compared to conventional treatments, electrochemical oxidation process using packed bed bipolar electrodes was adopted to treat COD and T-N. According to arrangement of feeder electrode, single packed bed bipolar electrode reactor and multi-paired packed bed bipolar reactor were developed and conventional zero-valent iron (ZVI) was selected as conducting bipolar electrode. Bipolar electrodes were coordinated three-dimensionally in the reactor. The experimental results showed that COD and T-N was little removed in unit system at different pH condition (pH 8 and 11) on 100V. However, in multi-paired system that applied 600V, COD was eliminated 80.85% (anode-cathode-anode, A-C-A) and 85.11% (cathode-anode-cathode, C-A-C), respectively. T-N was also removed 96.88% (A-C-A) and 90.63% (C-A-C), simultaneously. Current efficiency was estimated both single and multi-paired system. At unit bipolar packed bed reactor, current efficiency was almost zero, however in multi-paired system, current efficiency was 300~500% at A-C-A and 250~350% at C-A-C. Current efficiency was over 100% hence it was confirmed that this system is more effective than conventional electrochemical oxidation system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.8
• /
• pp.307-317
• /
• 2003

We analyze the performance of MC-CDMA and MC-DS/CDMA system on quasi-synchronized moble satellite return link. Quasi-synchronization is considered that chip offset between terminals is within a few chips. In 10-3 BER, performance of MC-DS/CDMA system with walsh code is 0.3dB better than that of MC-CDMA system when the number of user is 5 from -0.5 $T_{c}$ to 0.5 $T_{c}$ quasi-synchronization of MC-DS/CDMA system and from -5/64 $T_{c}$ $^{MC}$ to 5/64 $T_{c}$ $^{MC}$ quasi-synchronization of MC-CDMA system. MC-DS/CDMA system with walsh code is over 0.2dB better than that of MC-DS/CDMA system with extended m code and gold code. MC-CDMA system with walsh code is over 1.2dB better than that of MC-CDMA system with gold code when the number of user is 5 and lower than from -5/32 $T_{c}$ $^{MC}$ to 5/32 $T_{c}$ $^{MC}$ quasi-synchronization.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.167-171
• /
• 2004

In this Paper, We are going to propose the fire protection system with using CAN(Controller Area Network). The larger, higher and deeper buildings are, the more dangerous people are when fire happens. We are aware of the problems of prior Fire protection system. Therefore, we construct embedded system based on CAN communication that is capable of N:N communication, and build independent Fire protection system.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.9
• /
• pp.952-956
• /
• 1998

An automated system was developed for the routine preparation of carbon-11 ($^11C$) labeled radiopharmaceuticals, which consisted of three major parts including [$^11C$]methylation of the precursor with [$^11C$] iodomethane ($[^11C]CH_3I)$, purification of the desired product and formulation of the final $^11C$ labeled radiopharmaceutical. The whole system included seven three-way slider valves, eleven solenoid valves, four pneumatic cylinders, a HPLC (High Performance Liquid Chromatography) system and a rotary evaporator. Using this system, we investigated the radiochemical synthesis of L-[$methyl-^11C$]methionine, which is the most widely used amino acid in tumor PET (Positron Emission Tomography) studies. The overall operation took 3035 min including the production of $[^11C]CH_3I$ (10.5 min) and decay-corrected radiochemical yield was 25%. The automated system we described herein can be widely utilized for the preparation of many $^11C$ labeled radiopharinaceuticals and has been shown to be efficient, reliable and easy to operate.

• Journal of the Korean Solar Energy Society
• /
• v.21 no.2
• /
• pp.27-34
• /
• 2001

The greenhouse heating system using solar energy has been realized in the protective agriculture in this study in order to analyse the thermal energy characteristics of the system the effects of ambient air temperature, solar radiation, relative humidities and water content of ambient air on the greenhouse air temperature were investigated through computer simulation experimental analysis for validation of the simulation. The results from this study are summarized as follows: 1) The expected values of inside air temperature for the system solar energy were very much close to the experimental values. 2) In the system using solar energy, the expected values of daytime surface temperature of soil by computer simulation were very much similar to the measured values, but those of nighttime were higher than the measured value by almost $2.5^{\circ}C$. 3) Heat loss of daytime was found to be larger than that of night time as much as 2.0 to 4.2 times for the system using solar energy. 4) In the system using solar energy. while the ambient air temperature varied between $-7^{\circ}C$ and $-3.8^{\circ}C$, the temperature of the inside air was maintained between $0^{\circ}C$ and $22^{\circ}C$. 5) At the minimum ambient temperature of $-7^{\circ}C$, the temperature of the inside air was $0^{\circ}C$.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.6
• /
• pp.363-372
• /
• 2015

Recent some SoC FPGA Releases that integrate ARM processor and FPGA fabric show better performance compared to the ASIC SoC used in typical embedded image processing system. In this study, using the above advantages, we implement a SoC FPGA-based Real-Time Object Recognition and Tracking System. In our system, the video input and output, image preprocessing process, and background subtraction processing were implemented in FPGA logics. And the object recognition and tracking processes were implemented in ARM processor-based programs. Our system provides the processing performance of 5.3 fps for the SVGA video input. This is about 79 times faster processing power than software approach based on the Nios II Soft-core processor, and about 4 times faster than approach based the HPS processor. Consequently, if the object recognition and tracking system takes a design structure combined with the FPGA logic and HPS processor-based processes of recent SoC FPGA Releases, then the real-time processing is possible because the processing speed is improved than the system that be handled only by the software approach.