• 대한방사선치료학회지
• /
• 제33권
• /
• pp.79-88
• /
• 2021

목 적: 3D-bolus와 Step-bolus를 결합한 Bolus를 제작하였고, 그 유용성을 평가한다. 대상 및 방법: 3D 프린터(3D printer, USA)를 이용하여 10mm, 5mm두께로 Bolus를 제작하여 5mm두께의 Bolus에는 5mm의 Step Bolus를 결합하였다. Step bolus와 3D Bolus의 특성을 파악하기위해 두 bolus의 상대적전자밀도, HU값 및 질량밀도(mass density)의 차이를 알아보았다. 이 두개의 Bolus를 인체모형 Phantom에 적용하여 그 실효성을 확인해 보았다. 해당 phantom의 모든 윤곽설정 후, 전산화치료계획시스템(Eclipse 16.1, Varian medical system, USA)을 사용하여 치료계획을 수립하였다. 전자선6MeV을 사용하여 치료계획하고, phantom흉부쪽에 9개의 선량측정 point를 지정하였고, 해당 point에서의 Air-gap을 측정하였으며, 유리선량계(PLD)를 이용하여 적용하는 Bolus마다 동일 point에서의 선량평가를 진행하였다. 결 과: 3D-bolus 5mm와 Step-bolus 5mm를 결합한 Bolus를 제작하였고, 3D-bolus 1cm과 비교 평가하였다. 3D Bolus의 상대적전자밀도(Relative Electron Density)는 1.0559g/cm2, Step Bolus는 1.0590g/cm2로 0.01%이하의 차이여서 상대적전자밀도가 거의 일치했다. Air-gap의 경량 측정에서 Combined bolus는 3D-bolus와 비교하여 지정된 모든 point에 대해서 Air-gap은 많게는 54.32%로 줄거나 같았다. 유리선량계(PLD)를 이용한 선량측정에서는 경사진 point를 제외한 대부분의 point에서 combined bolus를 사용한 phantom에서 치료계획의 선량과의 일치도가 높았다. 결 론: 3D-bolus와 Step-bolus를 결합하여 만든 Combined bolus는 3D-bolus와 Step-bolus가 갖는 각각의 장점을 모두 갖는다. 또한 Air-gap으로 인한 선량부정확성을 억제하여 보다 향상된 선량분포를 보여주어, 효과적인 방사선 치료를 할 수 있다.

• 대한치과보철학회지
• /
• 제43권5호
• /
• pp.587-598
• /
• 2005

Statement of problem: Ceramic restorations should be made of porcelain layers of different opacity, shade, and thickness in order to provide a natural appearance. Lithium disilicate glass-ceramic system has superior color reproducibility, because it uses the ceramic ingot which is similar to teeth shade and uses the staining technique and layering technique. However, staining technique has a fault of discoloration. Also, porcelain is divided core and dentin layer, it is not enough to study about the influence of porcelain layer thickness and shade on the shade of ceramic restorations. Purpose: The purpose of this study was to evaluate the influence of porcelain layer thickness and color on the final shade of ceramic restorations. Materials and method: The CIE $L^*a^*b^*$(CIELAB) values of 72 assembled specimens, each consisting of 3 discs (enamel porcelain 0.2 mm/dentin porcelain -1.2, 0.9, 0.7, 0.5 or 0.3 mm/ceramic core -0.3, 0.5, 0.7, 0.9 or 1.2 mm, diameter is 1.0 mm) were evaluated with a spectrophotometer (Model Chromaview 300, Spectron Tech Co, Korea) for the shade A1, A2, A3 and A4. Distilled water (refractive index: 1.7) was used to attain optical contact between the layers. White, white gray, and white brown backgrounds were used to assess the influence of the background on the final shade. And the mean color difference value$({\Delta}E)$ was calculated. Results and conclusion: The results obtained from this study were as follows. 1. There was a significant correlation between the thickness ratio of the ceramic core/dentin porcelain system and $L^*,\;a^*\;and\;b^*$ values when the total thickness of specimen combination was smaller than 1.4 mm(P<0.05). 2. The specimen which the ceramic core thickness was more than 0.7 mm had the best masking effect against background colors. 3. The mean color difference value$({\Delta}E)$ is smaller than 2 $({\Delta}E<2)$ when the ceramic core thickness was larger than 0.7 mm and the total thickness of specimen was more than 1.4 mm.

• Composites Research
• /
• 제17권1호
• /
• pp.10-17
• /
• 2004

본 연구에서는 이관능성 에폭시(DGEBA)와 polymethylmethacrylate(PMMA)를 블랜딩하여 열적 특성과 기계적 계면특성을 측정하였다. 열적 특성은 DSC, DMA, 그리고 TGA를 이용하였으며, 블랜드의 기계적 계면특성을 측정하기 위해 contact angle로 표면자유에너지를 조사하였고, 파괴인성은 $K_{IC}$로 측정하고 $K_{IC}$ 실험 후 파괴단면을 SEM을 이용하여 관찰하였다. 실험 결과, 경화 온도와 유리전이 온도는 PMMA의 첨가에 의해 증가하는 것을 확인할 수 있었다. 또한 블랜드의 표면자유에너지는 PMMA의 저함량에서 높은 값을 나타내었고, 이는 비극성 요소의 증가와 극성 요소의 존재에 의한 것으로 판단된다. 블랜드의 파괴인성 측정 결과 5 phr에서 최대값을 나타내었다. 이는 DGEBA/PMMA 간의 상용성 또는 거대분자 사슬에서 물리적 결합의 증가에 기인하는 것으로 판단된다.

• 멤브레인
• /
• 제17권3호
• /
• pp.233-243
• /
• 2007

본 연구에서는 충전용 이차전지의 분리막으로 쓰이는 다공성 막을 기존의 분리막 재료보다 뛰어난 물성을 나타내는 PVdF(poly(vinylidene fluoride))를 사용하여 상전이 방법으로 제조하였다. 용매인 DMF(N,N-dimethylformamide)에 PVdF를 단일상으로 녹인 후 깨끗한 유리판에 캐스팅하여 막을 얻었다. 얻어진 분리막에서 가장 높은 공극률은 78.6%로 얻어졌다. UTM(universal testing machine)을 이용하여 측정된 분리막의 인장강도는 PVdF 20 wt%에서 5.16 MPa의 값을 나타내었다. 시차주사현미경(scanning electron microscopy, SEM)을 이용하여 분리막의 단면 관찰을 통해 다공성을 확인하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.136-136
• /
• 2003

In fiber optic networks, system size and cost can be significantly reduced by development of optical components through planar optical waveguides. One important step to realize the compact optical devices is to develop planar optical amplifier to compensate the losses in splitter or other components. Planar amplifier provides optical gain in devices less than tens of centimeters long, as opposed to fiber amplifiers with lengths of typically tens of meters. To achieve the same amount of gain between the planar and fiber optical amplifier, much higher Er doping levels responsible for the gain than in the fiber amplifier are required due to the reduced path length. These doping must be done without the loss of homogeniety to minimize Er ion-ion interactions which reduce gain by co-operative upconversion. Sol-gel process has become a feasible method to allow the incorporation of Er ion concentrations higher than conventional glass melting methods. In this work, Er-doped $SiO_2$-A1$_2$ $O_3$ films were prepared by two different method via sol -Eel process. Tetraethylorthosilicate(TEOS)/aluminum secondary butoxide [Al (OC$_4$ $H_{9}$)$_3$], methacryloxypropylcnethoxysaane(MPTS)/aluminum secondary butofde [Al(OC$_4$ $H_{9}$)$_3$] systems were used as starting materials for hosting Er ions. Er-doped $SiO_2$-A1$_2$ $O_3$ films obtahed after heat-treating, coatings on Si substrate were characterized by X-ray din action, FT-IR, and N-IR fluorescence spectroscopy. The luminescence properties for two different processing procedure will be compared and discussed from peak intensity and life time.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.230-230
• /
• 2013

In amorphous or microcrystalline thin-film silicon solar cells, p-i-n structure is used instead of p/n junction structure as in wafer-based Si solar cells. Hence, these p-i-n structured solar cells inevitably consist of many interfaces and the cell efficiency critically depends on the effective control of these interfaces. In this study, in-situ plasma treatment process of the interfaces was developed to improve the efficiency of a-Si:H solar cell. The p-i-n cell was deposited using a single-chamber VHF-PECVD system, which was driven by a pulsed-RF generator at 80 MHz. In order to solve the cross-contamination problem of p-i layer, high RF power was applied without supplying SiH4 gas after p-layer deposition, which effectively cleaned B contamination inside chamber wall from p-layer deposition. In addition to the p-i interface control, various interface control techniques such as thin layer of TiO2 deposition to prevent H2 plasma reduction of FTO layer, multiple applications of thin i-layer deposition and H2 plasma treatment, H2 plasma treatment of i-layer prior to n-layer deposition, etc. were developed. In order to reduce the reflection at the air-glass interface, anti-reflective SiO2 coating was also adopted. The initial solar cell efficiency over 11% could be achieved for test cell area of 0.2 $cm^2$.

• 분석과학
• /
• 제5권1호
• /
• pp.135-142
• /
• 1992

태양열은 투과되고 인체 및 내부 열원에서 발생하는 적외선은 내부로 반사시키는 산화인듐 주석막은 수동 태양열 포집기로 사용되어 에너지 절약용 창유리로 활용된다. 졸겔 담금 코팅으로 제조된 산화 인듐 주석막의 선택 흡수 투과 특성의 막의 두께, 열처리 조건, 기판의 영향을 UV-VIS-IR spectroscopy를 이용하여 관찰하였다. 졸겔 담금 코팅막은 $500^{\circ}C$, 환원 분위기에서 열처리하면 고유의 산화 인듐 주석막이 형성된다. 알칼리 이온 확산 방지막은 $SiO_2-ZrO_2$막은 태양에너지 투과 효율을 증진시킨다. $SiO_2-ZrO_2/ITO$막은 태양 에너지의 투과를 유지시키고 파장 2700 nm 이상에서의 내부열 방출을 억제하여 에너지 절약 특성을 갖는다.

• 한국응용과학기술학회지
• /
• 제23권2호
• /
• pp.137-146
• /
• 2006

We investigated the electrochemical properties for Langmuir-Blodgett (LB) films mixed with fatty acid (8A5H) and phospholipid (DLPE, DMPC, and DPPA). LB films of 8A5H monolayer and 8A5H-phospholipid mixture were deposited using the Langmuir-Blodgett method on the indium tin oxide(ITO) glass. The electrochemical properties measured using cyclic voltammetry with three-electrode system, an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode at various concentrations(0.1, 0.5, and 1.0 mol/L) of $NaClO_4$ solution. A measuring range was reduced from initial potential to -1350 mV, continuously oxidized to 1650 mV and measured to the initial point. The scan rate was 50, 100, 150 and 200 mV/s, respectively. As a result, LB films of fatty acid and phospholipid (8A5H/DLPE and DPPA) appeared irreversible process were caused by only the reduction current from the cyclic voltammogram and LB film of 8A5H-DMPC mixture was found to be caused by a reversible oxidation-reduction process.

• 멤브레인
• /
• 제26권1호
• /
• pp.26-31
• /
• 2016

폴리카프로락톤(PCL)에 NaCl을 혼합한 용액을 블레이드법에 의하여 막형태로 제조한 후 NaCl을 추출하는 염출법을 이용하여 조직공학적으로 사용할 3차원 다공망을 갖는 멤브레인 형태의 지지체를 제조하였다. 본 연구에서는 성형된 멤브레인의 건조조건과, NaCl 입자의 크기, NaCl의 혼합량을 각각 다르게 하여 제조하였다. 별도로 제작한 고분자용액 공급장치를 이용하여 PCL/클로로포름($CHCl_3$) 용액에 NaCl 입자가 균일하게 혼합된 용액을 유리판에 분주하여 필름 어플리케이터를 사용하여 블레이드법에 의한 멤브레인을 제조하였다. 멤브레인 지지체에는 NaCl 입자에 의한 거대기공과 거대기공을 이루는 구조벽에서는 $CHCl_3$의 증발에 의한 미세기공이 함께 복합적으로 상호 연결되어 형성되었다.

• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.305-311
• /
• 2013

PURPOSE. Over the past years, the adhesion of fiber posts luted with simplified adhesive systems has been a matter of great interest. The aim of this study was to assess the post retentive potential of a self-adhesive resin cement using different adhesive systems to compare the push-out bond strengths of fiber posts. MATERIALS AND METHODS. The post spaces of 56 mandibular premolar roots were prepared and divided into 4 experimental groups and further divided into 2 subgroups according to testing time (n=7). The fiber posts (Rely X Fiber Post) were luted with a self-adhesive resin cement (RelyX Unicem) and one of the following adhesive systems: no adhesive, a total-etch adhesive resin (Single Bond), a two-step self-etch adhesive resin (Clearfil SE Bond) and a one-step self-etch adhesive resin (Clearfil S3 Bond). Each root was cut horizontally, and 1.5 mm thick six root segments were prepared. Push-out tests were performed after one week or three months (0.5 mm/min). Statistical analysis were performed with three-way ANOVA (${\alpha}$=.05). RESULTS. Cervical root segments showed higher bond strength values than middle segments. Adhesive application increased the bond strength. For one week group, the total-etch adhesive resin Single Bond showed higher bond strength than the self-adhesive resin cement RelyX Unicem applied without adhesive resin at middle region. For 3 months group, the two-step self-etch adhesive resin Clearfil SE Bond showed the highest bond strength for both regions. Regarding the time considered, Clearfil SE Bond 3 months group showed higher bond strength values than one week group. CONCLUSION. Using the adhesive resins in combination with the self-adhesive resin cement improves the bond strengths. The bond strength values of two-step self-etch adhesive resin Clearfil SE Bond improved as time passes.