• Journal of the Korea Safety Management & Science
• /
• v.5 no.1
• /
• pp.115-128
• /
• 2003

To comparison the surface treatment methods of stone board materials, the results of Dorry's abrasive test were 23.4 for water-jet system and 18.9 for flame-burner system. Therefore abrasive hardness, the stone board materials by the water-jet system was greater than one by flame-jet system. As a result of Shore's hardness test, the stone board materials by water-jet system was twice greater than one by flame-jet system. Authors carried out microscopic observation to survey a defection of the composition minerals for two methods, but all of the both methods have not founded a defection. Therefore, the stone board materials by water-jet system was greater durability than one by flame-jet for the surface treatment methods.

• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.86-95
• /
• 2014

For the accomplishment of satellite's own missions, complicated control procedures and commands are required. Although absolute-Time Command and Command Sequences have been applied for controlling satellite and its operation historically, these command system only has a capability to manage sequential control process and has a limitation that cannot deal with decision and branch for corresponding to the condition of the time. To resolve above limitation, KARI has designed RTCSC which is mainly based on the existing RTCS but adopts a one-byte Op Code for supporting decision making and conditional branch. This paper introduces the design and implementation of RTCSC as On-Board Control System like OBCP, VML and IP.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.2
• /
• pp.140-144
• /
• 2003

A navigation sensor system for outdoor AGV(Automatic Guided Vehicle) using AMR(Anisotropic Magnetoresitive) sensors is described. We derive a formula of the position of AMR sensor using the measured magnetic field intensity due to permanent magnet with constant distance. The system consists of sensor board. sensor control board and position processing board. The sensor board measures magnetic field intensity, the sensor control board controls the measurement of six sensors sequentially, and the position processing board computes the accurate position of the permanent magnet using Least Square Method. We arranged six sensors at intervals of 30cm and measured the position of the permanent magnet moving at intervals of 30cm. Experimental results showed that we can get standard deviation of 2mm and error of &\pm&4.5mm at a height of 20cm from the permanent magnet.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.3
• /
• pp.241-246
• /
• 2004

We have designed LED display system using ARM7TDMI processor and implemented hangul input and output. This system is easily extensible because controller board and LED matrix board were designed one module. Possible Input Methods of LED display system are PC, PDA and remote controller's wired and wireless communication. We have ported QT/Embedded 2.3.7 with touch panel Input at embedded board of Linux OS 2.4.18 and PXA255 Processor based. QT Application which we coded is able to input displaying text using ethernet communication on embedded system. Many of indicating text data is able to be saved because only korean alphabet codes are stored for data which users want displaying.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.1
• /
• pp.27-33
• /
• 2011

Carbon board, an electromagnetic shielding new material, is expected to be applied to the art wall by combining draft designs. When environment-friendly architecture materials are used as an interior wall, they are suitable as finishing materials. According to the increasing tendency of the application of carbon board, various styles could be made by decorating the whole or a part of a wall with tiles with module structure or by patterning the wall with panel-type woodcut or pictures or sculpture. And more graphic design based on diverse variation, and reconstruction and combination between other motif is being on the rise as a new expression. In this paper, make it possible to applying in MDF board and carbon board pattern design using the woodcut technique. The structural and physical properties were compared by usability of abrasion, toughness, stability. Samples are analyzed dependent on the hardness and relative density, change of detail pattern design and trimming technique. These results have shown that the possibility of applying of carbon board can be a high rank interior materials, capable of creating value of the living system, connects with MDF board, also can express humanism in a beautiful manner.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.4
• /
• pp.214-220
• /
• 2007

Recently, most embedded systems have the multi-functions mixed the hardware with the software. The existing sequence programming methods are not suitable to implement the embedded system with multi-functions. So, it can be overcome the limit of a facility implementation by introducing the operating system in system. Also, due to the requirement about the better convenient and comfortable meeting or lecture environment, the necessity of electronic white-board is getting higher. Specially, the education using multimedia information is much more desirable for various and improved lecture at the high school and the university. But the sequence program which have been managed in existing electronic white-board system has some difficulties to achieve the software-oriented systems which has to accomplish many functions. In this paper, we propose the method to implement a facility of electronic white-board through using the embedded linux with excellent performance. The embedded linux presents the powerful software environment for the implementation of an embedded system and makes the realization of many various functions easy because it follows kernel characteristics of linux. In this paper, we describe the details for the structure of hardware, kernel source and device driver of a developed electronic white-board.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2221-2226
• /
• 2009

This paper presents the design of the LED sign board system installed on the exterior of a building and powered by a photovoltaic system. A grid connected photovoltaic system has been designed with the capacity estimate of the load, battery and power. After the luminance and uniformity of LED load has been checked, the sign board and the solar cell modules have been installed. The performance and problems occurred during the field test for the photovoltaic LED sign board system have been analyzed.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.1
• /
• pp.79-86
• /
• 2013

In this paper which it is relating to the DSRC system based road side equipment, we propose the protocol stack architecture of road side equipment and the process structure of the main RM, L7 and LLC layers which is road side equipment device as well. And also we design the signal flow and data-transfer process as well between road side equipment and on board equipment to describe the installation process between road side equipment and von board equipment based on DSRC system. Thus, it is possible to provide various application services between intelligent transportation systems of road side equipment and local server, as well as it enables the local server managing the memorys of on board equipment which entry in service area thru the road side equipment.

• Journal of the Korean Society for Railway
• /
• v.15 no.1
• /
• pp.42-47
• /
• 2012

There are ATC (Automatic Train Control), ATP (Automatic Train Protection), ATS (Automatic Train Stop) and ATO (Automatic Train Operation) etc. in train control systems. As various train control systems are installed according to sections, on-board signaling systems are installed to apply to the section. Hence, operation flexibility of trains is decreased. In other words, when trains are operated in the section where other train control systems are used, the on-board signaling systems are changed. Recently, a study on the combined on-board signaling system has been researched to solve this problem. The combined on-board signaling system consists of ATC, ATP and ATS device. Because the train control systems are vital, it needs to design the combined on-board signaling system by using k out of n system. In this paper, when k out of n system is applied in the combined on-board signaling system, the reliability and loss cost are analyzed by using failure rate in each device. Hence, the ideal number of systems is presented according to the number of outputs.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.521-528
• /
• 2003

In this study, a newly modified soil nailing technology called as the NDB(New Down and Board) soil nailing system is introduced. To improve the trafficability, workability, and economical efficiency, SMC(Sheet Molding Compound) board is adopted instead of using the concrete block facing. The SMC board has a distinct advantage of showing a fine view by directly coating with any kind of environmental photos. Composite material properties of the SMC board and cement grout are distinguished features of the NDB soil nailing system. In the present study, both laboratory tests(bending and punching failure tests) and field pull-out tests are carried out to analyze the behavior characteristics of the NDB soil nailing system, including the stress and strain distribution.