• 대한안전경영과학회지
• /
• 제9권6호
• /
• pp.163-169
• /
• 2007

This study deals with the improvement of production process on a flow production system with the consideration of six sigma. We analyze the production process and survey the important factors of improvement of productivity. Using a six sigma, we find strategic point and suggest a reformation of production process. We applied a simulation technique to simulate the production line proposed by the result of the Six sigma. With the result of the simulation, this study analyzes the propriety of production line and proposes the alternatives of new production process.

• 시스템엔지니어링학술지
• /
• 제11권1호
• /
• pp.49-54
• /
• 2015

The RAMS Process is the Internationally required activity to secure Reliability, Availability, Maintainability, and Safety of system which will be acquired as customer requirements. The importance are situations that have been growing gradually. Specially, When developing railway system, the needs of customer about RAMS Process has been being proposed in a variety of railroad business. Through this paper, It introduces the international standards described the RAMS Process and also presents the requirements that should have to comply with it. Furthermore, the necessary activities to get certificate of a Railway system are suggested and not only the various acquisition cases of certificate but also lessons learned by cases in the field of railway signalling system are presented.

• 반도체디스플레이기술학회지
• /
• 제5권4호
• /
• pp.23-27
• /
• 2006

Semiconductor industry has been dramatically developed with the information era of 21C, and the trend now is to consider that the technology of management system of the computer utility that has a high efficiency is important. This study investigated the intelligent decision system for residual gas purge process to effectively remove the residual gas in the tube after replacing the cylinder that is used for the gas cabinet or BSGS(Bulk Specialty Gas Supply System) of the semiconductor process. It was suggest from this study that it is possible to decide the type, frequency and volume of purge gas using various toxic gases which is necessary for each process. Also, this result will be utilized for operating the system, increasing the efficiency of management and saving energy.

• 한국가스학회지
• /
• 제14권1호
• /
• pp.21-27
• /
• 2010

LNG선박에서 발생한 기화가스의 처리를 위해 지금까지는 기화가스를 보조연료로 사용하거나 연소시켰지만 선박의 대형화와 디젤엔진의 사용으로 인해 기화가스를 처리할 수 있는 방법이 제한적인 상황이 되었다. 이를 극복하기 위한 방안으로 고안된 재액화공정은 장치비용과 선박의 제한적인 에너지 공급문제 때문에 지금의 형태를 갖게 되었고 3세대 공정까지 기술발전을 이룩했지만 고효율을 위해 계속해서 연구 개발 중이다. 재액화공정의 방식은 크게 Reverse Brayton Cycle System(RBCS)과 Claude Cycle System(CCS)으로 구분된다. 이 연구에서는 두 가지 System을 분석함으로써 이상적인 피드 상태를 도출하고, 장치 설정을 변경하여 재액화 효율을 높이는데 적합한 설정을 결정하기 위해 HYSYS를 사용하였다. 도출된 경과는 고효율 재액화공정의 설계를 위한 자료로 활용이 가능하다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1394-1397
• /
• 2004

Company perform a lot process to produce products. If company try to satisfy for customer and improve technological competition, they must be changed to new system. As a result, we developed knowledge based smart search system and customized it to PDM system on commercial use. In this smart search system, wherever process designer can seek to result quickly. This will be upgraded for be applied to some company.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.938-941
• /
• 2005

Recently We make a study of the process expert system model in 2005 process expert system concepts is applied to the digital meister expert system development. Well-designed expert systems imitate the reasoning processes experts use to solve specific problem. Specially, expert systems are used to the engineer in manufacturing industry fur the process control, production management and system management. In this paper, we propose the digital moister expert system fur product design process in manufacturing industry and we present introduction and contents of design process expert system methodology and software far the air purifier design system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.140-145
• /
• 1994

In this paper, we consider a problem to estimate process parameters using input-output data collected from the process operating in closed-loop control system. When orders and delay-time of the process are known correctly, under some conditions of identifying experiments, it is reported that accurate identification results can be obtained by applying prediction error method. To get accurate estimates, it is necessary to know orders and delay-time of the process. It is difficult to determine them in closed-loop identification, because ill-condition for identification are easily caused by selection of unsuitable order or delay time. Furthermore, the procedures to select orders and delay-time in open-loop identification aren't always available in closed-loop identification. The purpose of this paper is to determine a delay-time under suitable assumption that order of the process are known as the first step.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.34-37
• /
• 2003

This paper proposes a BPM(Business Process Management) system framework for the NPD(New Product Development) of automotive suppliers. Recently many enterprises change their organization from function-oriented to process-oriented through BPR (Business Process Reengineering). Especially, based on quality systems like QS9000, it is required to documented business processes and continuously improve these processes for customer satisfaction. NPD, the most significant function for industrial competition, is reinforced by the best practices business process to satisfy the requirements of quality systems. The main objective of the paper is the development of the information system that supports the best practices process management. For this, first, we define the requirements of BPM system for NPD based on the viewpoint analysis, and then propose a DES (Design Execution System) framework based on dynamic workflow engine. The DES is addressed in the characteristics of a NPD business process, integrated project management, and process execution. A prototype DES system has been developed in the web environment. Its validity is demonstrated by applying it to an automotive supplier.

• 시스템엔지니어링학술지
• /
• 제13권2호
• /
• pp.42-48
• /
• 2017

OCD (Operational Concept Document) is very important in system development. To develop OCD we should answer questions about, what template to use, what is the overall process to develop OCD, what kinds of diagrams we should use and how can we validate the OCD. To answer about the template we compared tow industrial guide on operational concept development and tailored it. For development process, we proposed a comprehensive process which satisfies the requirements of the project context. For use of proper diagram, we analyzed many kinds of diagrams used in representing behavior of system and choose some diagrams which best fit for our purpose. Finally we established validation criteria for operational scenario and requirement texts in operational concept documents.

• 품질경영학회지
• /
• 제51권4호
• /
• pp.633-642
• /
• 2023

Purpose: The variation of the internal diameters of gun barrel incurs a lot of reworks in gun barrel manufacturing process and the significant quality problem of gun barrel. And it is likely to stem from the current measurement system for the internal diameter of gun barrel and the related manufacturing process as well. The purpose of this study is to improve the gun barrel manufacturing process through improving measurement system. Methods: The improved measurement system using laser can measure the internal diameters of gun barrel more accurately, and the properly adjusted honing process reduces the variation of internal diameters of gun barrel. Results: Comparing the mean square error of internal diameters for 6 gun barrels measured before and after process improvement shows that the variation of gun barrel internal diameters was significantly reduced after the process improvement. Conclusion: The introduction of improved measurement system for the internal diameters of gun barrel and the adjustment of related honing process results in the reduction of reworks of gun barrels and their internal diameter variations.