• 한국컴퓨터정보학회논문지
• /
• 제20권8호
• /
• pp.121-128
• /
• 2015

This study aimed to investigate the effects of an unplugged robot education system capable of computerless coding education. Specifically, this study compared this education system with PicoCricket, an educational robot that can also be used with elementary students in lower grades, using assessment tools on perceived usefulness and ease. Using random sampling and randomized assignment for more objective validation, 30 participants were assigned to the unplugged robot education system group (experimental group) and 30 participants were assigned to the PicoCricket group (control group), for a total of 60 study participants. The research procedure included verification of the equivalence of the two groups by conducting a pretest after a 2-hour basic training session on algorithms and programming. The experimental and control groups learned the same content using different educational tools in accordance with software training guidelines for a total of 12 hours. Then, the difference in perceived usefulness and ease between the two groups was examined using a post-treatment test. The study results showed that scores on both dependent variables, perceived usefulness and perceived ease, were significantly higher in the experimental group than the control group. Moreover, scores on all sub-variables of the dependent variables were significantly higher in the experimental group than the control group. These results suggest that learners using the unplugged robot education system found it more useful and easier to use than learners using the existing educational robot, PicoCricket. This study's findings are significant, as according to the technology acceptance model, the perceived usefulness and ease of an educational tool are important variables that determine the acceptance of the tool (i.e., persistence of learning).

• 대한안전경영과학회지
• /
• 제15권3호
• /
• pp.61-69
• /
• 2013

According to ISO 26262 (the international standard on functional safety for automotive industry), the functional safety should be considered during the whole automotive systems life cycle from the design phase throughout the production phase. In order to satisfy the standard, the automotive and related industry needs to take appropriate actions while carrying out a variety of development activities. This paper presents an approach to coping with the standard. Analyzing the standard indicates that the safety issues of the automotive systems should be handled with a system's view whereas the conventional approach to solving the issues has been practiced with focus on the component's level. The aforementioned system's view implies that the functional safety shall be incorporated in the system design from both the system's life-cycle view and the hierarchical view for the structure. In light of this, the systems engineering framework can be quite appropriate in the functional safety development and thus has been taken in this paper as a problem solving approach. Of various design issues, the analysis and verification of the safety requirements for functional safety is a key study subject of the paper. Note, in particular, that the conventional FMEA (failure mode effects analysis) and FTA (fault tree analysis) methods seem to be partly relying on the insufficient experience and knowledge of the engineers. To improve this, a systematic method is studied here and the result is applied in the design of an ABS braking system as a case study.

• Journal of Construction Engineering and Project Management
• /
• 제2권4호
• /
• pp.11-19
• /
• 2012

Construction supply chain management (CSCM) has become one of the critical factors that determine the success of a construction project as it becomes increasingly complicated and mega-sized. Particularly for high-rise or mega-sized building construction, just-in-time supply chain management is required due to lack of storage space and effective logistics for construction components and materials at a construction site. Despite the fact that research and development of radio frequency identification (RFID) and wireless sensor network (WSN) technology have been performed, construction project managers still need to carry mobile devices and check material and component flow at each stage of the supply chain process. This research proposes that the equipment used in the construction supply chain process, such as movers, trailers, gates, and hoists, can become main actors in the supply chain process using RFID and WSN technologies. And the proposed equipment and process focused on a solution to the redundancy identification problem, which has been observed in operations that use RFID/WSN-based processes for construction logistics. This paper also presents issues identified through verification and validation of the research results and proposes further studies.

• 시스템엔지니어링학술지
• /
• 제15권2호
• /
• pp.47-56
• /
• 2019

Although the weapon systems are becoming more diverse and complex, they are progressing in a short development period and a longer test and evaluation period. The more difficult the given environment is, the more efforts and performance of quantitative target values can be made by development agencies to carry out stable projects. However, these target values of the Integrated Logistics Support are not specified in the requirements and being set during the system development phase. In this paper, application of MOEs, MOPs and TPMs for ILS are presented and provided the basis for carrying out systematic Verification & Validation activities. As a result that MOEs of the ILS were chosen as Availability and MOPs as Mission Reliability, Logistics Reliability, Maintainability and Supportability and TPMs as MTBF, MTBCF, MTTR and so on. In particular, it is appropriate tailoring and apply the TPMs considering the cost, schedule, scope of work and characteristics of the project.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1764-1776
• /
• 2017

To achieve economic stability, distribution Company as an economic institution should be managed by various processes. In this way, knowledge of different processes is the first step. Furthermore, expectations, outputs, requirement data, and sub-processes should be extracted and determined. Accordingly, to assign the performance responsibility of each process, the decision-making points must be introduced and, the deviation or change in set-points should be investigated into processes. Also, the performance of processes could be monitored by introducing of the sub-indictors. In this study, a practical method is presented for monitoring of reliability and power loss indices from viewpoint components' supply chain into the distribution network. At first, the visibility model of the supply chain is illustrated by focus group and the sub-indicators are extracted for each process of this chain. Then, validation and verification of the sub-indicators are accomplished by the Delphi method and, an information dashboard is presented by confirmed the sub-indicators and statistics methods. Finally, the proposed method is investigated by real data in a typical network and the results are analyzed.

• Steel and Composite Structures
• /
• 제39권1호
• /
• pp.109-123
• /
• 2021

This research endeavor intends to use the implicit finite element method to investigate the structural response of steel shear walls with partial plate-column connection. To this end, comprehensive verification studies are initially performed by comparing the numerical predictions with several reported experimental results in order to demonstrate the reliability and accuracy of the implicit analysis method. Comparison is made between the hysteresis curves, failure modes, and base shear capacities predicted numerically using ABAQUS software and obtained/observed experimentally. Following the validation of the finite element analysis approach, the effects of partial plate-column connection on the strength and stiffness performances of steel shear wall systems with different web-plate slenderness and aspect ratios under monotonic loading are investigated through a parametric study. While removal of the connection between the web-plate and columns can be beneficial by decreasing the overall system demand on the vertical boundary members, based on the results and findings of this study such detachment can lower the stiffness and strength capacities of steel shear walls by about 25%, on average.

• 임상간호연구
• /
• 제29권1호
• /
• pp.75-84
• /
• 2023

Purpose: This study developed a protocol for nursing care after death for adult patients in hospitals. Methods: This was a methodological study to develop a care after death protocol. The preliminary protocol was developed based on a literature review, guidelines, and practice recommendations from groups of experts and clinical nurses. Content validity was evaluated by a group of experts (n=6) and nurses (n=30) in two hospitals. Results: The preliminary protocol recommendations were modified by validation and the open-question analysis results. The final protocol comprised three general recommendations and 43 recommendations in five steps that are verification and notification of a death, personal care of the body, viewing the patient, patient transfer, and documentation and self-care. Conclusion: This study result provides nurses with a consensus information on patient care after death and family support in a hospital setting. This nursing protocol is expected to improve the quality of care after death for adult patients and their families, and can be used for developing educational and emotional support for nurses to accomplish their important role.

• 풍력에너지저널
• /
• 제15권1호
• /
• pp.60-68
• /
• 2024

In this study, a hardware-in-the-loop simulation (HILS) environment was established using MATLAB/Simulink to simulate and verify the power performance of a wind turbine. The target wind turbine was selected as the NREL 5 MW model, and modeling was performed based on the disclosed specifications. The HILS environment consists of a PC equipped with a MATLAB/Simulink program, a programmable logic controller (PLC) for uploading and linking control algorithms, and data acquisition (DAQ) equipment to manage wind turbine data input and output. The operation of the HILS environment was carried out as a procedure of operation (PC) of the target wind turbine modeled based on MATLAB/Simulink, data acquisition (PLC) of control algorithms, control command calculation (PLC), and control command input (PC). The simulation was performed using the HILS environment under turbulent wind conditions and compared with the simulation results performed under the same conditions in the HILS environment using the commercial program Bladed for performance verification. From the comparison, it was found that the dynamic simulation results of the Bladed HILS and the MATLAB HILS were close in power performances and the errors in the average values of rotor rotation speed and power generation between the two simulations were about 0.44 % and 3.3 %, respectively.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.409-413
• /
• 2005

Even though the relative importance of length scale of flow system allow us to simplify three dimensional flow problem to one or two dimensional representation, many systems still require three dimensional analysis. The objective of this study is to develop an efficient and accurate finite element model for analyzing and predicting three dimensional flow features in natural rivers and to offend to model spreading of pollutants and transport of sediments in the future. Firstly, three dimensional Reynolds averaged Navier-Stokes equations with the hydrostatic pressure assumption in generalized curvilinear coordinates were combined with the kinematic free-surface condition. Secondly. to simulate realistic high Reynolds number flow, the model employed the Streamline Upwind/Petrov-Galerkin(SU/PG) scheme as a weighting function for the finite element method in conjunction with an appropriate turbulence model(Smagorinsky scheme for the horizontal plain and Mellor-Yamada scheme for the vertical direction). Several tests is performed for the purpose of validation and verification of the developed model. A simple rectangular channel, 5-shaped and U-shaped channel are used for tests and comparisons are made with RMA-10 model. Runs for each case is converged stably without a oscillation and calculated water-surface deformation, longitudinal and transversal velocities, and velocity vector fields are in good agreement with the results of RMA-10 model.

• Computers and Concrete
• /
• 제21권1호
• /
• pp.47-54
• /
• 2018

Artificial neural network models can be successfully used to simulate the complex behavior of many problems in civil engineering. As compared to conventional computational methods, this popular modeling technique is powerful when the relationship between system parameters is intrinsically nonlinear, or cannot be explicitly identified, as in the case of concrete behavior. In this investigation, an artificial neural network model was developed to assess the residual compressive strength of self-compacted concrete at elevated temperatures ($20-900^{\circ}C$) and various relative humidity conditions (28-99%). A total of 332 experimental datasets, collected from available literature, were used for model calibration and verification. Data used in model development incorporated concrete ingredients, filler and fiber types, and environmental conditions. Based on the feed-forward back propagation algorithm, systematic analyses were performed to improve the accuracy of prediction and determine the most appropriate network topology. Training, testing, and validation results indicated that residual compressive strength of self-compacted concrete, exposed to high temperatures and relative humidity levels, could be estimated precisely with the suggested model. As illustrated by statistical indices, the reliability between experimental and predicted results was excellent. With new ingredients and different environmental conditions, the proposed model is an efficient approach to estimate the residual compressive strength of self-compacted concrete as a substitute for sophisticated laboratory procedures.