• 설비공학논문집
• /
• 제12권12호
• /
• pp.1057-1065
• /
• 2000

A sizing of sensible and latent energy recovery system with condensing heat exchanger is important to the design of a thermally controlled facilities. The transient system simulation program TRNSYS 14.2/IISiBat has been used to evaluate the energy consumptions of a thermally controlled facilities which consist of boiler, chiller and condensing heat exchanger, The boiler and chiller are selected based on the annual peak loads and controlled to maintain the setting temperature of $14~17^{\circ}C$. Simulation shows that the amount of sensible and latent energy recovered by heat exchanger is almost 20% of total heating load.

• 여성건강간호학회지
• /
• 제26권1호
• /
• pp.19-27
• /
• 2020

Purpose: This study was conducted to develop a simulation-based postpartum care education program for women with postpartum hemorrhage and to verify the effects of the program on postpartum care. Methods: This program was developed according to the ADDIE model of instructional system design, which consists of analysis, design, development, implementation, and evaluation phases. This quasi-experimental study used a non-equivalent control group pre- and post-test design, and data were collected from April 23 to May 4, 2015. To verify the effects of the program, 33 nursing students in the experimental group participated in a simulation program, whereas 31 students in the control group were given a case study. Results: The experimental group had statistically significantly higher scores for clinical performance (t=-4.80, p<.001), clinical judgment (t=-4.14, p<.001), and learning satisfaction (t=-10.45, p<.001) than the control group. Conclusion: The results of this study indicate that the simulation-based postpartum care education program for women with postpartum hemorrhage was effective for developing students' competency, implying that a similar program should be integrated into the clinical training component of the maternal nursing curriculum.

• 한국기계연구소 소보
• /
• 통권18호
• /
• pp.87-97
• /
• 1988

The algorithm for relation of contact status, track shift, and contact force caused from wheel/rail contact geometry is presented. Grafting this algorithm into a algorithm of general program analyzing mechanical system, the program for time domain simulation of railway vehicle dynamics, called CASOTD, was developed. In addition, as applied example of CASOTD, the dynamic simulation of railway vehicle running on a rail joint and a irregularly alinemented rail is done in this paper.

• International Journal of Automotive Technology
• /
• 제2권4호
• /
• pp.157-164
• /
• 2001

The vehicle electric power system, which consists of two major components: a generator and a battery, which have to provide numerous electrical and electronic systems with enough electrical energy. A detailed understanding of the characteristics of the electric power system, electrical load demands, and the driving environment such as road, season, and vehicle weight is required when the capacities of the generator and the battery are to be determined for a vehicle. An easy-to-use and inexpensive simulation program may be needed to avoid the over/under design problem of the electric power system. A vehicle electric power simulator is developed in this study. The simulator can be utilized to determine the optimal capacities of generators and batteries. To improve the expandability and easy usage of the simulation program, the program is organized in modular structures, and is run on a PC. Empirical electrical models of various generators and batteries, and the structure of the simulation program are presented. For executing the vehicle electric power simulator, data of engine speed profile and electric loads of a vehicle are required, and these data are obtained from real driving conditions. In order to improve the accuracy of the simulator, numerous driving data of a vehicle are logged and analyzed.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 추계학술대회
• /
• pp.289-292
• /
• 1996

The 2-way beam simulation for the diagnostic ultrasound is performed with simplified computation by approximating the transducer and the system. The results show that the simulation program can be used as a good system design tool.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.484-487
• /
• 1997

In this paper a simulation program for the powertrain control of a gasoline engine with automatic transmission is presented, The object-oriented programming approach has been pursued, and MATLAB/ SIMULINK was adopted for its environment. The purpose of the paper is to demonstrate the programmability of a control system in the object-oriented fashion so that the transferability of the objects is guaranteed. The program developed in the paper was applied to a gasoline engine and the mathematical models used in the paper were just adopted from the literature. It is shown that the simulation results and real experimental results coincide well. Therefore, it is expected that the program or objects made in the paper are useful for the automotive engineers when they design a new engine/transmission system or modify a part of existing system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.767-772
• /
• 2004

A dynamic simulation program of a catenary-pantograph system including tunnel section and transient section is developed in this study. The simulation program can accommodate for the pantograph of two panheads and three d.o.f model. Using the developed program, the dynamic characteristics with a SCHUNK'S WBL 85-PANTOGRAPH is analyzed at the conventional TAEBAEK line and its tunnel section when the catenary system is supported by a tunnel bracket. The simulation results show that the variation of contact force and uplift displacement is allowable in general section and the entrance and exit of a tunnel, but the uplift displacement and the separation ratio within tunnel section is difficult to allow.

• 한국전자파학회논문지
• /
• 제16권3호
• /
• pp.293-299
• /
• 2005

차량에 장착된 AV수신기의 성능에 영향을 주는 전파환경의 측정, 분석과 재현 기능을 통합한 프로그램을 개발하였다. 프로그램은 GPS(Global Positioning System)를 이용한 "위치별 전계 측정프로그램", "선택 대역 전계 측정프로그램"과 DB화된 데이터를 이용한 "전파환경 재현 프로그램"의 독립적인 부분들로 구성하였다. 또한 측정 및 분석, 재현 시스템의 설정방법을 제시하였다. 이러한 연구결과는AV시스템의 수신 이상 현상의 원인을 정확히 밝혀내는데 도움이 될 것이며, 동일한 현상을 현장이 아닌 전자파 무반사실내의 시뮬레이션 시스템 상에서 확인하고, 이상 현상에 대한 대응방안을 찾을 수 있게 될 것이다.

• 한국태양에너지학회 논문집
• /
• 제28권1호
• /
• pp.1-8
• /
• 2008

The aim of this study is to develop the photovoltaic simulation program, called SimPV, which can Predict hourly based power generation of various PV modules and conduct an intensive economic analysis with Korean situation. To establish the reliability of the PV simulation results, we adopt the PV calculation algorithm of TRNSYS program of which verification has already well approved. Extensive database for hourly weather data of Korean 16 cities, engineering data for PV system and building load profiles are established. Case study on the 2.5kW roof integrated PV system and economic analysis are presented with the developed program.

• 한국철도학회논문집
• /
• 제8권1호
• /
• pp.51-56
• /
• 2005

A dynamic simulation program of a catenary-pantograph system including tunnel section and transient section is developed in this study. The simulation program can accommodate for the pantograph of two panheads and three d.o.f model. Using the developed program, the dynamic characteristics with a SCHUNK'S WBL 85-PANTOGRAPH are analyzed at the conventional TAEBAEK line and its tunnel section when the catenary system is supported by a tunnel bracket. The simulation results show that the variation of contact force md uplift displacement is allowable in general section and the entrance and exit of a tunnel, but the uplift displacement and the separation ratio within tunnel section is difficult to allow.