• The Korean Journal of Elementary Counseling
• /
• v.11 no.3
• /
• pp.427-446
• /
• 2012

The purpose of this study was to investigate the influence of stress in families of children with disabilities upon a problem-solving ability based on a buffering effect of family resilience through life cycle. To achieve this purpose, the subjects in this study was 546 parents who have kindergarten, elementary, middle & high school students in special schools. The date for this study were derived from questionaries and the answer sheet was analyzed by SPSS(VER. 14). A descriptive statistics, correlation analysis, hierarchical moderating regression analysis were used to investigate the general information and the difference of perception between groups. The findings of this study were as follows: Higher belief system, higher organization type, higher communication process of the family with disabled children tend to appear more positive influences on buffering effects for stresses of family and solving-problem abilities. Findings from the current study demonstrate that the buffering effect of family resilience indicate to have positive influences on the relationship between the stress and the problem-solving ability in the family with disabled children.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.2
• /
• pp.141-149
• /
• 2015

In the fabrication of electronic circuits used in electronic products, molybdenum thin films are deposited on semiconductors to prevent oxidation. During the deposition, the presence of a particle or dust at the interface between the thin film and substrate causes the decrease of adhesion, performance, and life cycle. In this study, a damage measurement targeting two kinds of glass substrate, with and without particles, was performed in order to measure the change in the molybdenum thin film deposition area in the presence of a particle. Clean and dirty molybdenum thin film specimens were fabricated and directly deposited on a substrate using the sputtering method, and a reflection-type digital holographic interferometer was configured for measuring the damage. Reflection-type digital holography has several advantages; e.g., the configuration of the interferometer is simple, the measurement range can be varied depending on the magnification of a microscopic lens, and the measuring time is short. The results confirm that reflection-type digital holography is useful for the measurement of the damage and defects of thin films.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.5
• /
• pp.45-54
• /
• 2010

Recently more and more construction projects have become high-rise, complex and intelligent. Accordingly, such projects require an integrated management system for tasks, with a lean approach to construction with work processes for management and productivity. In particular, Construction Information Technology (CIT) fields are concerned with Building Information Modeling (BIM), which represents the process of generating and managing building data during its life cycle. Constructability research has progressed for the project goal which is a cost-time-quality of optimization by integrated construction knowledge and experience. However, the current constructability process has not been performed efficiently, as the existing 2D drawings and papers lack consistent and accurate information, it is difficult to share the contents of work, and the use of information is inefficient. This study proposes that the reformation and enhancement of BIM-based constructability work process can lead to brilliant performance in the framework of the construction phase through achieving collaboration between the design team and the workers at the site.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.3
• /
• pp.91-100
• /
• 2015

An increase in energy such as natural gas, coal, oil, has occurred to a large amounts of environment impact emissions, it is necessary to reduce in the construction industry for the energy consumption. To encourage remodeling project in developed countries of the majority, on the basis of this, remodeling project in the construction industry has grown to a large amount. Results of analysis of the research related to the advanced remodeling, analysis of the economic validity in accordance with the production and process and building elapsed years of selection alternative of remodeling there has been a problem that has not been properly reflected. In this study, a decision support model that can simultaneously choose the most cost-effective and energy-efficiency alternative. Developed process model, generates a "Remodeling Solution" that combines the renewable energy equipment and envelope system, energy performance evaluation of the application of international standards(ISO-13790, DIN V 18599), perform the economic evaluation through LCCA(Life Cycle Cost Analysis) technique, circulated evaluation and configured to output the optimal Remodeling Solution. The results of applying the model developed in the case, it was confirmed that it is possible to select a choice of cost-effective energy-saving alternative. Then, developed model through this study, it is expected to be able to help highly effective remodeling alternative to selecting by decision-makers.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.3
• /
• pp.11-23
• /
• 2015

Construction Management(CM) and Building Information Management(BIM) have a lot in common that they need to establish a cooperation system among different disciplines and promote smooth communication among project stakeholders throughout the project life-cycle. BIM can be an effective information management tool for CM's business and improve their service value. However, BIM uses by Construction Managers(CMr) are very limited. The objective of this study is to analyze the intention of CMrs to adopt BIM and establish effective BIM use strategy in the CMr's point of view. This study utilizes Technology Acceptance Model(TAM) as a research method, and the results show that 1) CMrs think it is more important whether BIM is required to be adopted in their business process at the social or industry level than that BIM can improve their personal competence, recognition, and impressions through their voluntary BIM adoption; 2) that CMrs think it is important to figure out business processes where BIM can be smoothly incorporated; and 3) that CMrs hesitate the use and trial of BIM in their realworld business although they agree that BIM needs to be eventually adopted in their business in the future. Based on these results, directions for establish a strategy for BIM adoption were proposed at the CMr's point of view

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.3
• /
• pp.91-100
• /
• 2011

Green technologies of buildings are spreading for saving resource and energy consumption during life cycle of buildings. However, selection of optimized the technologies for applying projects is needed a lot of time and costs. Therefore prioritization is necessary to apply the technologies for buildings. An evaluation of economic value for the technologies is significant for prioritization of the technologies, however, the current evaluation system of economic value for technologies is not reflected the accurate features of the technologies. Green technologies have the objectives for reducing the emission of CO2 and saving the cost during the whole lifecycle of buildings. Thus the evaluation of economic feasibility for green technologies is needed to include the economic value from improving the environment. This paper developed the economic evaluation method integrated with LCC and LCA to accurately analyze the economic value for green technologies. Moreover, this paper drew the priority of the technologies by conducting case studies with the integrated method and analyzing the results with AHP. The conclusion of case studies, Green technologies is worth more if to include the economic value from improving the environment. Then in analysis of priority, Green intelligent component technologies were rated the highest. The conclusion of the study is able to utilize the supporting tool for making decision to select the optimized technologies for the projects and precedence study for developing future research of prioritization for green technologies. The future study for improving the developed method will supplement the various evaluation factors and apply the detailed weight to analyze the priority of green technologies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.744-754
• /
• 2017

In this study, an analytic hierarchy process (AHP) was conducted with the aim of developing a post-disaster refugee housing performance index system (PPS) to improve the post-disaster refugee housing (PRH) performance criteria for the foundation of quality-based development. The PRH was defined as a mid-term temporary housing facility that is used for a certain period before the permanent housing is established. The safety, rapidity, reusability, habitability, and economy were derived from major performance factors through prior research. A hierarchical PPS was organized by linking the major performance factors with the whole life cycle process of PRH. The priority of each performance index of PPS was determined quantitatively using the analytic hierarchy process through an expert survey. Based on AHP analysis, the performance criterion of the total weight 1-10 ranking and the performance criterion of the first rank in each category were classified into the essential performance criterion (must be achieved) and the others were classified into the recommended performance criterion (optional achieved) and the performance index was constructed considering all stages of PRH development. With the completion of the PRH performance index, it is expected that victims will be able to secure stable residence and return to their daily lives quickly.

• Journal of Engineering Education Research
• /
• v.11 no.1
• /
• pp.64-75
• /
• 2008

A new product development and product realization process (PRP) is a circulating and feedback process by generating ideas through creative problem solving process. The early stages of PRP correspond to conceptual design and product development, in which a large portion of product life cycle cost can be saved. The optimal design method for this stage is a robust design suggested by Taguchi. Quality must be 'engineered in' since it can not be 'inspected out.' A robust design is an engineering methodology to improve the quality of a product by minimizing the efforts of variations without eliminating the causes. The objective of this study is to propose a scheme and a case study of robust design for exploring design parameters, and introduce a creative problem solving process. Major research subjects include a creative problem solving process, robust design procedure and their implementation. For the experiment of Taguchi method, a toy catapult is adopted. For the creativity development, a short project is assigned to devise a similar tool with the toy catapult. A reference model is suggested to compare and evaluate their ideas.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.1
• /
• pp.26-33
• /
• 1998

This experiment was conducted to classify the plant species occurring in the saline reclaimed land by saline tolerance. The vegetation of reclaimed land was composed of various plant species from halophyte to glycophyte showing different saline tolerances. In the investigated saline region, reclaimed land of Youngjong island, Inchun city, 175 species belonging to 32 families were found. Our survey was carried out in two region, having different salinity due to different desalinization. The electricalconductivity (EC) of more saline region showed 48.0mS/cm nd the other region showed 13.0mS/cm. It is assumed that intensity of precipitation and runoff of rainfall may cause salinity gradient in the investigated region. The plant species occurred in the experimental region were classified as 72 species of annual, 42 species of biennial, and 61 species of perennial according to life cycle. For knowing relationship between vegetation of saline region and saline tolerance of occurring species, we tested the saline susceptibility of plant species collected at the saline regions. Testing plants were cultured by nutrient solution containing 200 mM NaCl, the critical concentration of survival in glycophytes. The saline tolerance was graded by the growing capacity in the sand-culture system. The more saline-tolerant species screened by sand culture were Atriplex gmelini, Suaeda asparagoides, Aster tripolium, Suaeda maritima, Salicornia herbacea, and Suaeda japonica. The most saline tolerant family was Chenopodiaceae. Poaceae, Cyperaceae, and Brassicaceae showed relatively high tolerance to saline stress. In the course of growth under the high saline condition, the most noticeable change was the darkening of leaves by increasing of chlorophyll content. The chlorophyll contents were increased with saline stress in most species.

• Journal of KIISE:Software and Applications
• /
• v.28 no.10
• /
• pp.720-731
• /
• 2001

Complexity metrics have been developed for the structured paradigm of software development are not suitable for use with the object-oriented(OO) paradigm, because they do not support key object-oriented concepts such as inheritance, polymorphism. message passing and encapsulation. There are many researches on OO software metrics such as program complexity or design metrics. But metrics measuring the complexity of classes at the OO analysis phase are needed because they provide earlier feedback to the development project. and earlier feedback means more effective developing and less costly maintenance. In this paper, we propose the new metrics to measure the complexity of analysis classes which draw out in the analysis based on RUP(Rational Unified Process). By the collaboration complexity, is denoted by CC, we mean the maximum number of the collaborations can be achieved with each of the collaborator and determine the potential complexity. And the interface complexity, is denoted by IC, shows the difficulty related to understand the interface of collaborators each other. We verify theoretically the suggested metrics for Weyuker's nine properties. Moreover, we show the computation results for analysis classes of the system which automatically respond to questions of the user using the text mining technique. As a result of the comparison of CC and CBO and WMC suggested by Chidamber and Kemerer, the class that have highly the proposed metric value maintain the high complexity at the design phase too. And the complexity can be represented by CC and IC more than CBO and WMC. We can expect that our metrics may provide us the earlier feedback and hence possible to predict the efforts, costs and time required to remainder processes. As a result, we expect to develop the cost-effective OO software by reviewing the complexity of analysis classes in the first stage of SDLC(Software Development Life Cycle).