• Journal of the Korean Geotechnical Society
• /
• v.32 no.10
• /
• pp.41-53
• /
• 2016

Stability of the braced earth wall in the composite ground, which is composed of the jointed base rocks and the soil strata depends on the earth pressure acting on it. In most cases, the earth pressure is calculated by the empirical method, in which base rocks are considered as a soil strata with the shear strength parameters of base rocks. In this case the effect of the joint dips of the jointed base rocks is ignored. Therefore, the calculated earth pressure is smaller than the actual earth pressure. In this study, the magnitude and the distribution of the earth pressure acting on the braced wall in the composite ground depending on the joint dips of the base rocks and the ratio of soil strata and base rocks were experimentally studied. Two dimensional large-scale model tests were conducted in a large scale test facility (height 3.0 m, length 3.0 m and width 0.5 m) by installing 10 supports in a scale of 1/14.5. The test ground was presumed with the base rock ratio of the composite ground of 65%:35% and 50%:50% and with the joint dips for each base rock layer, $0^{\circ}$, $30^{\circ}$, $45^{\circ}$ and $60^{\circ}$, respectively. And then finite element analyses were performed in the same condition. As results, the earth pressure on the braced wall increased as the base rock layer's joint dips became larger. And earth pressure at the rock layer increased as the rock rate became larger. The largest earth pressure was measured when the base rock rate was 50% (R50) and the rock layer's joint dips was $60^{\circ}$. Based on these results, a formular for the calculation of the earth pressure in the composite ground could be suggested. Distribution of earth pressure was idealized in a quadrangular form, in which the magnitude and the position of peak earth pressure depended on the rock ratio and the joint dips.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.217-225
• /
• 2002

When we use the flowable resin on the primary molars for quick handling, one of the most important property is the wear resistance. This study was performed to compare the wear resistance characteristics of four flowable composite resins [Arabesk flow (group 1), Tetric flow (group 2), Aeliteflow (group 3), Filtek flow (group 4)] to that of one control composite resin [Z100 (group 5)]. Specimen discs(n=10), 10mm wide and 2mm thick, were stored in distilled water at $37^{\circ}C$ for 7 days prior to testing. The specimens were subjected to 50,000 strokes at 2 Hz on the MTS system. During the test, the following parameters were maintained: the lateral excursion at 0.4mm, occlusal force at 2-100N with a force profile in the form of a half sine wave. The measurements of volume loss, depth of wear, and Vicker's hardness number of composite resins, and SEM observations of the polished and abraded surfaces were established. One-way ANOVA and Scheffe's multiple comparison test were employed to detect statistically significant differences among the flowable composite resin groups and the control composite group at P<.05. The following results were obtained: 1. Group 3 showed the least volume loss, while group 4 showed the greatest. The mean volume loss increased in the following order: group 3

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.1
• /
• pp.66-71
• /
• 2013

Muscular dystrophy is a genetically heterogeneous group of disorders characterized by progressive muscle weakness of variable distribution and severity. Fukuyama type congenital muscular dystrophy (FCMD) is an unusual form of muscular dystrophy with autosomal recessive inheritance and is clinically characterized by an early age of onset, severe central nervous system involvement, facial muscle weakness, and multiple joint contractures. Muscular dystrophy is susceptible to perioperative respiratory, cardiac and other complications. Patients with FCMD have upper airway muscle weakness, therefore general anesthesia is preferred to sedation regarding maintaining the airway when treating these patients. The development of malignant hyperthermia in general anesthesia for patients with muscular dystrophy is a concern. Total intravenous anesthesia should be used instead of inhaled anesthetics because of the risk of malignant hyperthermia. A 3-year-9-month old, 13kg girl with Fukuyama type congenital muscular dystrophy was scheduled for dental treatment under general anesthesia. She had multiple caries and 14 primary teeth needed caries treatment. Prior to general anesthesia, oral premedication with 9 mg midazolam was given. General anesthesia was induced and maintained with target controlled infusion of propofol $3{\sim}3.5{\mu}g/mL$. The patient with progressive muscular dystrophy was successfully treated under total intravenous anesthesia with a target controlled infusion of propofol. There were no complications related to anesthesia and dental treatment during or after the operation. This case suggests that target controlled infusion of propofol is a safe and appropriate anesthetic technique in FCMD patients for dental treatment.

• KDI Journal of Economic Policy
• /
• v.31 no.1
• /
• pp.169-206
• /
• 2009

This study stems from a question, "How should we understand the pattern of the Korean economy after the 1990s?" Among various analytic methods applicable, this study chooses a Structural Vector Autoregression (SVAR) with long-run restrictions, identifies diverse impacts that gave rise to the current status of the Korean economy, and differentiates relative contributions of those impacts. To that end, SVAR is applied to four economic models; Blanchard and Quah (1989)'s 2-variable model, its 3-variable extensions, and the two other New Keynesian type linear models modified from Stock and Watson (2002). Especially, the latter two models are devised to reflect the recent transitions in the determination of foreign exchange rate (from a fixed rate regime to a flexible rate one) as well as the monetary policy rule (from aggregate targeting to inflation targeting). When organizing the assumed results in the form of impulse response and forecasting error variance decomposition, two common denominators are found as follows. First, changes in the rate of economic growth are mainly attributable to the impact on productivity, and such trend has grown strong since the 2000s, which indicates that Korea's economic growth since the 2000s has been closely associated with its potential growth rate. Second, the magnitude or consistency of impact responses tends to have subsided since the 2000s. Given Korea's high dependence on trade, it is possible that low interest rates, low inflation, steady growth, and the economic emergence of China as a world player have helped secure capital and demand for export and import, which therefore might reduced the impact of each sector on overall economic status. Despite the fact that a diverse mixture of models and impacts has been used for analysis, always two common findings are observed in the result. Therefore, it can be concluded that the decreased rate of economic growth of Korea since 2000 appears to be on the same track as the decrease in Korea's potential growth rate. The contents of this paper are constructed as follows: The second section observes the recent trend of the economic development of Korea and related Korean articles, which might help in clearly defining the scope and analytic methodology of this study. The third section provides an analysis model to be used in this study, which is Structural VAR as mentioned above. Variables used, estimation equations, and identification conditions of impacts are explained. The fourth section reports estimation results derived by the previously introduced model, and the fifth section concludes.

• Management & Information Systems Review
• /
• v.37 no.3
• /
• pp.83-113
• /
• 2018

The purpose of this study to empirically examine a smart work investment and job performance by change resistance. Firstly, There investigates mediating role of the communication between the smart work investment and the job performance. Secondly, It will identify the job productivity differences through a level of organizational change resistance that reduced smart work investment. The smart work is to provide the flexibility of time and location and is a working method to improve a work productivity of organization members. The introduction of smart work means the adoption of new organizational culture, institution and technology and requires a novel change of a custom and pattern on existing organization culture and institution because of transformation form of communication and collaboration. The method of this study adopts a structural equation model to test a mediating effect of communication and a moderating effect of change resistance level. This model confirms whether smart work investments provide a positive impact on communication and organizational productivity. In addition, I will classify a change resistance level of smart work by cluster analysis and then check a critical path difference of job productivity between each group. As a result, The organizational IT, institution and culture on the smart work investment appeared to important influencers in communication and also had a direct influence of individual performance. Also, The three independent variables of smart work investment have an indirect influence of individual and organizational performance through communication mediating variables. However, the organizational IT and institution as independent variables do not provide direct influence of organization performance. Nevertheless, two independent variables of organizational IT and institution have an indirect influence the organization performance through communication mediating variables. As a result of confirming a productivity of three groups on organization resistance, there was a difference the individual and organizational performance among groups. The low-level group of organizational resistance showed high coefficient value of performance compared to other groups. The group analysis implications, The smart work investment appeared significantly to revise the institution first, build culture secondly and advanced technology lastly. The theoretical implication from this study contributes an extension of social science theory through socio-technical systems, institution, culture, change resistance and job performance based on smart work. The practical implications explain the smart work success in step-by-step investment rather than radical investment as level management of change resistance. In future research, the smart work performance between private and public firms will analyze a difference of the organizational culture, institution, technology and performance.

• Journal of Korean Society of societal Security
• /
• v.4 no.2
• /
• pp.73-78
• /
• 2011

In order to resolve the problem of change in global climate which is worsening as days go by and to preemptively cope with strengthened restriction on carbon emission, the government enacted 'Framework Act on Low Carbon Green Growth' in 2010 and selected green technology and green industry as new national growth engines. For this reason, the necessity to use the un-utilized waste heat across the whole industrial system has become an issue, and studies on and applications of recycling in the agricultural and fishery fields such as cultivation of tropical crops and flatfishes by utilizing the waste heat and thermal effluent generated by large industrial complexes including power plants are being actively carried out. In this study, we looked into the domestic and overseas examples of having utilized waste heat abandoned in the form of power plant thermal effluent, and carried out economic efficiency evaluation of sturgeon aquaculture utilizing thermal effluent of Yeongwol LNG Combined Cycle Power Plant in Gangwon-do. In this analysis, we analyzed the economic efficiency of a model business plan divided into three steps, starting from a small scale in order to minimize the investment risk and financial burden, which is then gradually expanded. The business operation period was assumed to be 10 years (2012~2021), and the NVP (Net Present Value) and economic efficiency (B/C) for the operation period (10 years) were estimated for different loan size by dividing the size of external loan by stage into 80% and 40% based on the basic statistics secured through a site survey. Through the result of analysis, we can see that reducing the size of the external loan is an important factor in securing greater economic efficiency as, while the B/C is 1.79 in the case the external loan is 80% of the total investment, it is presumed to be improved to 1.81 when the loan is 40%. As the findings of this study showed that the economic efficiency of sturgeon aquaculture utilizing thermal effluent of power plant can be secured, it is presumed that regional development project items with high added value can be derived though this, and, in addition, this study will greatly contribute to reinforcement of the capability of local governments to cope with climate change.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.1-12
• /
• 2016

This study is to make the liquid crystalline structure using sucrose distearate (Sucro-DS) emulsifier to create the hydrophilic type oil-in-water (O/W) emulsion, the droplets of the emulsion having a structure of a multi-lamellar structure. We have studied the physicochemical properties of Sucro-DS using those techniques. And it has been studied in the emulsion performance. In order to form the liquid crystalline structure applying 3 wt% of Sucro-DS, 5 wt% of glycerin, 5 wt% of squalane, 5 wt% of capric/caprylic triglyceride, 3wt% of cetostearyl alcohol, 1wt% of glyceryl mono-stearate, 78 wt% of pure water in mixture having the lamellar structure of stable multi-layer system was found to formed. By applying them, they were described how to create an unstable active material encapsulated cream. Further, the moisturizing cream was studied using this technique. It reported the results to the skin improvement effect by the human clinical trials. The pH range to produce a stable liquid crystal phase using a Sucro-DS was maintained in 5.2~7.5. In order to increase the stability of the liquid crystal, it was when behenyl alcohol containing 3 wt%, the hardness at this time was 13 kg/mm,min. Viscosity of the same amount was 25,000mPas/min. After a test for the effects of the emulsions, the concentration of 6 wt% Sucro-DS is that was appropriate, the particle size of the liquid crystal was 4~6mm. It was observed through a microscope analysis, reliability of the liquid crystal changes for 3 months was found to get stable at each $4^{\circ}C$, $25^{\circ}C$ and $45^{\circ}C$. In clinical trial test, before applying a moisturizing effect it was $13.4{\pm}7%$. Moisturizing cream liquid crystal was not formed in $14.5{\pm}5%$. Therefore, applying than ever before could see the moisture about 8.2% was improved. On the other hand, it was the moisturizing effect of the liquid cream is $19.2{\pm}7%$. The results showed that 43.3% improvement than that previously used. Applications fields, Sucro-DS emulsifier used liquid cream, lotion, eye cream and a variety of formulations can be developed, as well as the cosmetics industry is expected to be wide fields in the application of the external preparation for skin emulsion technology in the pharmaceutical industry and pharmaceutical industry.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.95-102
• /
• 2015

In this paper, the effects of sodium hydroxide (NaOH) and aluminum potassium sulfate ($AlK(SO_4)_2{\cdot}12H_2O$) dosage on strength properties were investigated. For evaluating the property related to the dosage of alkali activator, sodium hydroxide (NaOH) of 4% (N1 series) and 8% (N2 series) was added to 1~5% (K1~K5) dosage of aluminum potassium sulfate ($AlK(SO_4)_2{\cdot}12H_2O$) and 1% (C1) and 2% (C2) dosage of calcium oxide (CaO). W/B ratio was 0.5 and binder/ fine aggregate ratio was 0.5, respectively. Test result clearly showed that the compressive strength development of alkali-activated slag cement (AASC) mortars were significantly dependent on the dosage of NaOH and $AlK(SO_4)_2{\cdot}12H_2O$. The result of XRD analysis indicated that the main hydration product of $NaOH+AlK (SO_4)_2{\cdot}12H_2O$ activated slag was ettringite and CSH. But at early ages, ettringite and sulfate coated the surface of unhydrated slag grains and inhibited the hydration reaction of slag in high dosage of $NaOH+AlK(SO_4)_2{\cdot}12H_2O$. The $SO_4{^{-2}}$ ions from $AlK(SO_4)_2{\cdot}12H_2O$ reacts with CaO in blast furnace slag or added CaO to form gypsum ($CaSO_4{\cdot}2H_2O$), which reacts with CaO and $Al_2O_3$ to from ettringite in $NaOH+AlK(SO_4)_2{\cdot}12H_2O$ activated slag cement system. Therefore, blast furnace slag can be activated by $NaOH+AlK(SO_4)_2{\cdot}12H_2O$.

• Advances in pediatric surgery
• /
• v.9 no.1
• /
• pp.45-51
• /
• 2003

A nationwide survey on choledochal cyst was undertaken among 39 members of the Korean Association of Pediatric Surgeons. The members were required to complete a questionnaire and the case registration form for each patient during the five year period of 1997 to 2001. Three hundred and forty eight patients were registered from 32 institutions. The average number of patients per surgeon was one to two every year. The male to female ratio was 1:3.4. The age of patients on diagnosis was $49.0{\pm}44.4$ months. The geographic distribution was 34.8% in Seoul and Kyoungki-do, 33.3% in Kyoungsang-do, 17.9% in Cholla-do, and 8.5% in Choongchung-do, in order of frequency. The three common clinical presentations were abdominal pain (63.8%), vomiting (35.3%), and jaundice (29.1%). Only seven patients (2%) presented with classic triad, and 25 patients were diagnosed by antenatal ultrasonographic examination. According to the Todani Classification, 238 patients (7l.3%) were type 1, 3 (0.9%) type 11, and 93 (27.8%) type IV. At the time of the operation, three important associated conditions were choledocholithiasis in 45 patients (15.1%), liver fibrosis (Grade 1-4) in 35, and previous operative procedure for biliary diseases in 10. Associated anomalies were observed in 13 patients (3.8%). Three hundred thirty nine (98.8%) of 343 lesions were treated by Cyst excision and Roux-Y hepaticoiejunostomy. One hundred seventy-six patients had an anomalous arrangement of the pancreatobiliary ductal system (APBD): APBD was not in 92 patients, biliary duct joined to the pancreatic duct in 51, and pancreatic duct joined to the biliary duct in 26. There were 8.5% early, and 7.7% late phase operative complications. The major complications were bleeding, anastomotic leakage, and acute pancreatitis. The combination of acute abdomen and choledochal cyst may suggest spontaneous rupture. Because of the development of late intrahepatic bile duct stones, long term follow up after cyst excision and hepaticojejunostomy is required. The optimal time of surgical intervention should also be considered in the situation of routine use of antenatal ultrasonographic examination. This is the first review of the choledochal cyst in Korea and provides baseline data for future comparisons.

• Journal of Korean Society of Forest Science
• /
• v.89 no.3
• /
• pp.440-451
• /
• 2000

This study was conducted in order to provide essential data and relevant management proposal to conserve and maintain big and old trees in a rational way. For the field survey, 77 big and old trees preserved by the laws in Chollabuk-do, Korea were investigated. The study results are summarized as follows : 1. To conserve and manage big and old trees, the valuable trees have been designated as natural monument trees and protection-needed trees. There are 141 individuals of 37 species designated as natural monuments and 10,049 individuals of 102 species designated as protection-needed trees. 2. Management budget for natural monument trees was devoted at 70% from the national expenditure, but that for protection-needed trees was devoted at 98% from the local expenditure. 3. Standardized sign boards and sign stones for natural monument trees were well placed and other protection facilities such as fences, branch supports and branch holdings were established. On the other hand, management of protection-needed trees was deficient overall. 4. Problems for designation process and management of protection-needed trees could include items such as insufficient management budget, various development activities, land ownership, misjudgement of tree age and species identification, unsatisfaction of sign board placement, insufficient surgery for damaged trees, pavement around tree root system and environmental pollution around the trees. 5. In order to improve the existing management methods of big and old trees, the following schemes were suggested : the development of practical criteria for natural monument and protection-needed trees, nationwide surveys of big and old tree resources, the security of national budget, securing sufficient spaces for the tree growth, specialization of management systems, extended practices of tree form management, establishment of permanent standard signs and consideration of opinions of village residents.