• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.6
• /
• pp.686-692
• /
• 2012

Solid free-form fabrication (SFF) technology was developed to fabricate three-dimensional (3D) scaffolds for tissue engineering (TE) applications. In this study, we developed a polymer deposition system (PDS) and created 3D microstructures using a bioresorbable polycaprolactone (PCL) polymer. Fabrication of 3D scaffolds by PDS requires a combination of several devices, including a heating system, dispenser, and motion controller. The system can process a polymer with extremely high precision by using a 200 ${\mu}m$ nozzle. Based on scanning electron microscope (SEM) images, both the line width and the piled line height were fine and uniform. Several 3D micro-structures, including the ANU pattern (a pattern named after Andong National University), $45^{\circ}$ pattern square, frame, cylindrical, triangular, cross-shaped, and hexagon, have been fabricated using the polymer deposition system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.3
• /
• pp.193-197
• /
• 2001

This paper presents a design method of sliding model control (SMC) for single input linear systems with mismatched uncertainties. We define a virtual state based on the controllable canonical form of the nominal system. And we defined a sliding surface for the augmented system with a virtual state. This sliding surface makes it possible to use the SMC technique with various types of controllers. In this paper, we construct a controller that combines SMC with robust controller. We design a robust controller for the system with mismatched uncertainties using a form of linear matrix inequality(LMI). We make a virtual state from this robust control input and the states of the nominal system. And we design a sliding model controller that stabilizes the overall closed-loop system.

• Journal of Ship and Ocean Technology
• /
• v.4 no.3
• /
• pp.33-45
• /
• 2000

A computational system for wave and viscous flow analysis (WAVIS) has been developed. The system includes a pre-processor, flow solvers and a post-processor. The pre-processor is composed of full form presentation, surface mesh and field grid generation. The flow solvers are for potential and viscous flow calculation. The post-processor has graphic utility for result analysis. All the programs are integrated in a GUI-launcher package. To validate the developed CFD programs of WAVIS, the calculated results for modern commercial hull forms are compared with measurements. It is found that the results from WAVIS are in good agreement with the experimental data, illustrating the accuracy of the numerical methods employed for WAVIS.

• KSCI Review
• /
• v.15 no.1
• /
• pp.185-190
• /
• 2007

An image retrieval system is a piece of software that searches identical or similar images based on various image-specific features. This paper proposes a trademark image retrieval system that uses image colors and forms. In the proposed system, input images are segmented into several other regions, and color distribution histograms for different regions are extracted for use as color information. The proposed system uses form information through the preprocessing process such as boundary surface extraction, centroid extraction, angular sampling and, and through calculating the sums of the distances between the centroid and the boundary surfaces, standard deviations, and the ratios between long and short axes. Like this, the color and form information extracted is used to perform retrieval through measuring similarity.

• 한국기계연구소 소보
• /
• s.13
• /
• pp.27-43
• /
• 1984

In order to obtain the high resilience, low compression set and less of hardness change in the wiper blade rubber, vulcanization system and receipes must be controlled. To improve the above the above Physical properties, the system should be taken as follows. i) peroxide vulcanization system and sulfur vulcanization system. ii) rubber having more cis-form than trans-form. iii) moderate particle size cabon black. v) usage of other improvement agent. The rubber blade with 4.4% compression set, 76% resilience, Hs 0 $\pm$ 2 hardness change could be abtained through vulcanization system, In addition, the surface of wiper blade must be treated by chemically and physically to minimize for the skid and friction.

• Journal of information and communication convergence engineering
• /
• v.16 no.2
• /
• pp.93-98
• /
• 2018

The Internet of Things (IoT) is a form of the emerging 4th industry in the 5G era. IoT is expected to develop naturally in our daily life in the 5G era in which high-speed communication will be completed. Along with the rise of IoT, concerns about security and malicious attacks are also increasing. This paper examines DoS attacks, which are one of the representative security threats of IoT and proposes a local detection and blocking system that are suitable for response to such attacks. First, systems of the LoRaWAN type, which are most actively researched in the IoT system field and DoS attacks that can occur in such systems were examined. Then, the inverse order tree algorithm using regional characteristics was designed as a cluster analysis form. Finally, a system capable of defending denial-of-service attacks in the 5G IoT system using local detection and blocking with the Euclidean distance was designed.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.136-144
• /
• 1999

This paper presents an in-process measurement system for shaft radius measurement during grinding process. This system does not require to stop the grinding process, which can enhance productivity and quality. In order to measure the radius, the system employs an eddy current sensor that can measure without any contact with the shaft. This type of sensor is very appropriate because it is insensitive to interference such as cutting fluid, coolant, contact pressure, and wear. For data analysis, the measurement system is modeled as a linearized discrete form where the states with noise are estimated by an extended Kalman filter. This system has been validated through simulations and experiments.

• Korean Institute of Interior Design Journal
• /
• v.21 no.4
• /
• pp.21-30
• /
• 2012

Interior space of modern society has a request for non-functional considerations as well as a need for function. French sociologist Jean Baudrillard defined this phenomenon as a dialectical relationship between the functional system and the non-functional system in his book "The System of Objects". The main goal of interior design is the pursuit of non-functional aspects which can satisfy emotional needs of human being without ignoring functional side. This means that designer should exceed the limitation of the functional system and overcome it by his own idea and method. Under this recognition, this paper tried to understand how Shiro Kuramata and Takashi Sugimoto accomplished the overcoming successfully. Sugimoto breaks through mechanical monotony introducing the non-functional objects into the functional system. His objects have power and form of the nature. They also shows traces of manufacture and labor. They works as media transferring old life and values. Sugimoto sometimes adopts the non-functional system such as collection, so it reveals time of collecting and arrangement of various objects. In contrast to Sugimoto, Kuramata erased the form of functional object and turned over the everydayness of the functional system. Instead, aesthetical phenomena substitutes form. Having doubts about the geometrical order of functional system, he opened a discourse for its meaning and limitation. However they have something in common which works as a blueprint for establishing subject's discourse. This discourse is comprised of their own memories of scenes. These subjects' discourse institute worlds through their design works based on each methodology. From the Heideggerian point of view, the worlds offer a foundation which allows the establishment of art in interior design.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.9-23
• /
• 1993

Free-form surface machining is usually performed with an NC milling machine and a ball end milling cutter. Since this conventional method is basically sculpting on a plane, it is not suitable for three dimensional body machining. This article will introduce a new machining method for three dimensional body with free-form surface and newly developed machine tool suitable for such machining.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.10a
• /
• pp.232-236
• /
• 1993

The Tunnel Form(T/F) system instead of traditional euro form has been tried to reduce construction duration and to improve concrete quality in reinforced concrete wall type apartment construction. To find the relationship for concrete compressive strength between cylinder mold and slab, the different curing locations of concrete cylinder mold in the room have been investigated. The test results showed that the compressive strength of the cylinder concrete with middle-upper location in the room was most near concrete compression strength with respect to slab concrete strength.