• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.382-386
• /
• 2009

This paper describes design and analysis techniques of cold forging process for precise producing of T-200 type spider made of SCr420H by utilizing pneumatically operated enclosed die set. Since deducing feasible closing force is an important factor to optimize entire pneumatically operated cold forging system, a series of FE analyses with varying the number of gas cylinders has been carried out to investigate the influence of closing force upon the direction of applied load at die surfaces. It also reveals the optimum distribution of the gas cylinders in terms of the flatness of upper/lower plates.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.214-216
• /
• 2004

Power quality has become concern both utilities and their customers with wide spread use of electronic and power electronic equipment. This paper deals with the use of a multiresolution analysis and a discrete wavelet transform to detect interruption, sag, swell, transients and etc. The simulation system is constructed by using PSCAD/EMTDC. To show the effectiveness of the proposed method, a various case studies are simulated.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1748-1753
• /
• 2003

3D-PTV measurement was conducted on the wake of a sphere. The Reynolds number is 1130 with the diameter(d=30mm). The measurement system consisted of three CCD cameras, an image grabber, an Ar-Ion laser and a host computer. An eigenvalue analysis was introduced for the analysis on the wake. Statistical turbulent properties were quantitatively clarified using the time-consecutive instantaneous three-dimensional vectors obtained by the 3D-PTV system. The spatial distributions of the sphere wake showed strong relations with spiral motions of the vortcies shedded from the surface of the sphere.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.3
• /
• pp.73-79
• /
• 2011

In this study, an analytical realization of end-milling system was introduced using recursive parametric modeling analysis. Also, the numerical mode analysis of end-milling system with different conditions was performed systematically. In this regard, a recursive least square modelling algorithm and the natural mode for real part and imaginary one was discussed. This recursive approach (RLSM) can be adopted for on-line end-milling identification. After experimental practice of the end-milling, the end-milling force was obtained and it was used for the calculation of FRF (Frequency response function) and mode analysis. Also the FRF was analysed for the prediction of a end-milling system using recursive algorithm.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.283-285
• /
• 1990

This paper describes on partial discharge in polyethyelen that are important for materials analysis, and so to will introduce to system of partial discharge analysis. The results of this study will be provided on properties of partial discharge in polymer materials.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7C
• /
• pp.1007-1014
• /
• 2004

In this paper, H.235 based security mechanism for H.323 multimedia applications was implemented in embedded environment. H.235 covers authentication using HMAC-SHAI -96, authenticated Diffie-Hellman key exchange, security capability exchange, session key management for voice encryption, and encryption functions such as DES, 3DES, RC2. H.235-based mechanisms were also analyzed in terms of its security and possible attacks.

• Journal of Biosystems Engineering
• /
• v.31 no.2 s.115
• /
• pp.95-101
• /
• 2006

Present chemical application system using a power sprayer has been a labor intensive, ineffective and shirking task in farming. Therefore, a small RF controlled (unmanned) helicopter was suggested to replace the conventional spray system. The aerial application using the unmanned helicopter has been already utilized in Japan, where total area applied up to 704,000 ha in 2005. In this article, the status and cost analysis on the unmanned agricultural helicopter were studied. The aerial application using the agricultural helicopter helps precise and timely spraying and reduces labor intensity and pollution. The field capacity of the helicopter was found to be 60-70 ha a day. The break even point was estimated near the operating area of 750 ha annum. The development of an agricultural helicopter was necessary for taking advantages of both technique and economy.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.6
• /
• pp.625-632
• /
• 2015

The study of water environment system using a multivariate analysis in Changnyeong-Haman weir section has been conducted. The purpose of this study is to establish better understanding related water qualities in the Changnyeong-Haman weir section which can provide useful information. The data were consisted of water quality data and algae data including WT(water temperature), pH, DO, EC, COD, SS, T-N, $NH_3-N$, T-P, $PO_4-P$, Chl-a, TOC, d-silica, t-silica, Cyanobacteria, Diatoms, and Green algae. Statistical analyses used in this study were correlation analysis, principal components, and factor analysis. According to correlation analysis on COD and TOC, it revealed that the each value of correlation coefficient was 0.843. On the other result, a negative correlation was observed between diatoms and d-silica. Furthermore, the results of principal component analysis to the overall water quality were classified into four main factors with contribution rate 81.071%.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.731-733
• /
• 1996

In this paper, a new time-domain reduction method for unbalanced 3 phase power systems will be represented. The impulse response of the system is used to identify a discrete-time equivalent filter model. The model is formulated directly in the phase domain. Each phase has a self-mode equivalent model and two mutual-mode equivalent models. The equivalent model is determined by the transfer function identification technique based on the Prony analysis. The model is implemented in EMTDC and tested with an unbalanced 3 phase network. The result of test showed that the equivalent model is accurate.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.331-336
• /
• 2008

Engine builders have separately developed and applied torsional, axial and structural vibration monitoring system on most marine engines. These systems displayed their results for engine or ship operation engineers and were not regularly stored at the hardware of computer. So, tile history and trend of various engine and hull vibrations was not supported for preventive maintenance and to protect the failure of these activity or function. The integrated vibration or stress monitoring system(EVAMOS : Engine/Rotor Analysis and monitoring System) in marine diesel engine, its machineries and hull have been developed by the dynamics laboratory of Mokpo Maritime University during last 3 years. This paper introduces tile design conception and ability of commercial software EVAMOS with field data on several actual tests.