• Journal of Biosystems Engineering
• /
• v.13 no.2
• /
• pp.28-37
• /
• 1988

This study was conducted to construct the soil bin system and associated microcomputer-based data acquisition system which is to be used for the effective evaluation of wheel performance. The soil bin system consists of four main parts; soil bin, carriage drive system, test carriage and soil processing carriage. The test carriage was constructed to measure the five performance parameters of testing wheels; pulling forte, motion resistance, sinkage and rotational speed of test wheel, and speed of test carriage. The test wheel is powered by a hydraulic system up to 8 ps. Soil processing carriage was designed to provide uniform test soil condition across the toil bin, and reproduction of soil conditions found satisfiable. The data acquisition system consists of APPLE II PLUS microcomputer, strain amplifier, I/O interface, A/D converter, digital counter and various transducers. It takes about 0.86 seconds to measure a set of performance parameters and store on the floppy disk simultaneously. Series of experiment showed that this system can be used effectively for evaluating the wheel performance associated with soil.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.1
• /
• pp.17-23
• /
• 2015

With the increase in the risk of GPS jamming, the development and application of anti-jamming GPS techniques have been actively performed. As the objective performance verification of developed techniques is important, equipment development for verification and discussion on anti-jamming performance test method and procedure have also been conducted. However, most tests are related to the specification of equipment and therefore detailed procedure of the performance verification of an anti-jamming system needs to be developed. In this study, requirements for anti-jamming performance verification were described, and test configurations and performance evaluation items depending on three kinds of test methods (lab test, basic outdoor test, and chamber test) were suggested for anti-jamming performance verification.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2004

The general method which changes sub-cooling of refrigerant is to control the expansion valve in the state of mixing with liquid and gas phase. In this study, the performance of vehicle air conditioning system is to control either changing the expansion valve or adding the sub condenser. Therefore, this research finally is tested in case of the fourth test procedure, the second test was suitable for a valve opening area due to adjusting valve slope in comparison with the other test. The other test except for the second test happened to do liquid back due to the excessively liquified refrigerant into the system. In conclusion, the second test was appeared not to be influenced upon liquid back, and it is to expect positive performance by controlling an expansion valve. Therefore, it will be also useful to research for an increase of compressor efficiency Performance improvement of an air conditioner is to reinforce the suction performance of the evaporator and increase the sub-cooling, which make use of the sub-cooling system.

• Journal of the Korean Society of Systems Engineering
• /
• v.15 no.2
• /
• pp.9-16
• /
• 2019

The most important task in acquiring the weapon system is to determine the required performance and to test & evaluate it. The importance of the weapon system by ROC (Required Operational Capability) is not considered, and system development and test evaluation are carried out. In addition, technical incidental performance is tested on the same basis as ROC in the test evaluation and determined according to the result. Development test and evaluation that evaluates technical ability is very important, but development agency is supervised and performed. In this paper, we propose a method to give weights considering the importance of ROC, a technical incidental performance determination and test procedure, and a improvement plan for the development and operational test & evaluation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.8 s.113
• /
• pp.857-863
• /
• 2006

This paper described the performance test and sound characteristics of helicopter 'Tail-Fan' anti-torque system. In this research, Korea Aerospace Research Institute(KARI) developed 'Tail-Fan' anti-torque system for a helicopter and carried out performance and sound capturing tests of even and uneven tail fans. The performance test is carried out and the noise signals which are generated during the test are saved with microphones at the same time. The performance test's results meet the design requirements. Tone-corrected perceived noise level is reduced by replacing the even product with the uneven one.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.2
• /
• pp.25-31
• /
• 2015

This paper presents a performance evaluation procedure for advanced emergency braking (AEB) system. To guarantee the performance of AEB system, AEB test scenario should contains various driving conditions which can be occurred in real driving condition. Also, performances of each elements of AEB system, such as sensor, decision, human machine interface (HMI) and control, should be evaluated in various situations. For this, driving conditions, road types, environment, and elements of AEB system were introduced. Test scenario has been designed to represent the real driving condition and to evaluate the safety performance of AEB system in various situations. To confirm that the proposed AEB test scenario is realistic and physically meaningful, vehicle test have been conducted in two cases of proposed AEB test scenario: subject vehicle cut-out scenario and narrow street turn left scenario.

• Smart Media Journal
• /
• v.10 no.3
• /
• pp.54-59
• /
• 2021

Flight data acquired through flight instrumentation equipment during aircraft development play an important role in aircraft development and performance improvement. Therefore, as the reliability of flight instruments is required, inspection systems to check the soundness of flight instruments are very important. In this paper, we analyze the existing test system for flight data instrumentation equipment and present improvements in the hardware and software aspects of the test system. Based on this, we design and implement a test system with improved performance and present test results. Test system with improved performance improves cost savings, flexible application, and maintenance compared to the existing test system. Therefore, the robustness of the instrumentation equipment can be obtained, which can be expected to improve the reliability of flight data.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1138-1143
• /
• 2011

One of the critical items in radar testing is the ability to evaluate the performance of radar systems under real operational environments. But it takes lots of time and cost to operate real targets and analyze the test results due to a large amount of data based on these complicated environments. In this paper, the Radar Simulative T&E Lab. is introduced, and the test and analysis results of the developing radar for predicting the radar system performance are described in the Radar Simulative T&E Lab. This laboratory could be used to test the far-field characteristics of antenna radiation pattern and to perform an effective radar system test and evaluation using a simulative target generator under a low cost repeating test situation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.166-174
• /
• 2008

Recently, the automotive industry has been developing rapidly. With the progress parts of the automobile components need high quality and the reliability. Among them, braking unit is essential device, and acquire the reliability through the performance test of brake. This study was aimed to design the performance-test-bench to measure the drag torque which has effect on caliper in braking unit. In this progressive technology, it is vital importance to use hydraulic and pneumatic, and to combine test bench with instrumentation engineering technology. This system to construct the design of hydraulic and pneumatic circuit, interface technique between sensors and personal computer, data acquisition and display design, and integrated control are very important technology. Moreover, reliable data are obtained through vacuum system and hydraulic and pneumatic system by using of booster and brake master cylinder which are actually applied to automobile. Then, data signal detector sensors for speed, pressure and torque is attached on this system. Therefore, in this study, we designed a performance-test-bench by and we also made an total control system using personal computer which is more progressive and flexible method than existing PLC control.

• Journal of Auto-vehicle Safety Association
• /
• v.9 no.1
• /
• pp.19-24
• /
• 2017

This paper present a performance evaluation scenarios to assess the safety performance of autonomous emergency braking (AEB) system for cyclist collision. To guarantee the safety performance of AEB for cyclist, AEB system should be tested in various scenarios which can be occurred in real driving condition. For this, real-traffic car-to-cyclist collision data are analyzed to classify the real traffic collision scenarios. Using this information, typical car-to-cyclist collision scenarios are selected. Also, in order to develop the detail features of these collision scenarios, several accident cases related with these scenarios are explained. Based on these information, test scenarios which can describe the car-to-cyclist collisions occurred in Korea are proposed. For practicality and feasibility of the test scenarios, proposed scenarios should be designed to assess the safety performance of AEB system effectively. For this, some test scenarios are combined or removed based on the consideration about the effectiveness of each scenario to the assessment of the performance of AEB system. To confirm that the proposed test scenarios are realistic and physically meaningful, simulation is conducted using simple AEB system in proposed test scenarios.