• 한국실천공학교육학회논문지
• /
• 제4권2호
• /
• pp.129-135
• /
• 2012

전기자동차들을 수학적으로 모델링하고 시뮬레이션 하는 많은 방법들이 있다. 전기 자동차의 각 요소들은 다른 물리적인 배경과 모델들을 갖고 있으나, 하나의 수학적 모델로 구성하기란 어려우므로 다양한 물리적 모델이 요구된다. 시뮬레이션이 목적에 따라 수행할 시뮬레이션에 관한 디양한 레벨들이 있다. 즉, 개념 체계 레벨, 회로 레벨, 더 상세한 요소레벨로 구성된다. 본 연구에서는 전기 자동차에서 여러 가지 요소들에 대한 다양한 물리적 모델들과, 다중레벨 시뮬레이션에 관하여 연구하고자 한다. 또한, 본 시뮬레이션 방법은 공학교육에 학습효과를 향상 시킬 수 있다.

• 한국시뮬레이션학회논문지
• /
• 제27권3호
• /
• pp.37-44
• /
• 2018

복잡한 이산 사건 동적 시스템을 분석하기 위해 모델링 및 시뮬레이션(M&S) 기법을 적용함에 있어서, 기존에는 사용자 수준에 따라 각기 다른 시뮬레이션 환경을 사용해야 했다. 그에 따른 불편함을 해결하기 위하여 본 논문에서는 사용자 수준에 따라 M&S를 수행할 수 있는 통합된 개발 환경 및 개발 환경에서 모델을 효율적으로 관리하기 위해 정형화된 인터페이스를 제안한다. 인터페이스는 확장된 DEVS 형식론 및 모델 제작 규칙으로 구성되어있다. 개발 환경은 모델링 환경과 시뮬레이션 환경으로 나뉘고, 모델링 환경에서는 사용자의 수준별로 다른 모델링 방식을 제공한다. 모델링 작업의 결과로 생성된 모델을 활용하여 시뮬레이션 환경에서 여러 파라미터를 입력해서 시뮬레이션 함으로써 다양한 경우에 대해서 실험을 할 수 있다. 사례 연구에서는 제안한 M&S 환경을 구현한 내용에 대해 소개하고, 환경을 활용해서 복잡한 국방 전투 시스템을 모델링하고, 만들어진 모델을 바탕으로 시뮬레이션 하는 과정을 소개한다.

• 한국군사과학기술학회지
• /
• 제18권3호
• /
• pp.326-334
• /
• 2015

This paper describes the verification and the validation about the development of the integrated interoperability system for live, virtual, and constructive simulations on the aircraft weapon system. The proposed integrated interoperability system provides the framework and application softwares for implementing a synthetic environment emulating real-world environment among distributed simulation models, which are a mission model and an air combat model of a constructive level, an tactical simulator of a virtual level, and simulated ACMI of a live level. In this paper, we verify requested functions through an developmental test and evaluation, and validate operability and usability through conducing integrated LVC scenarios on the integrated interoperability system.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권2호
• /
• pp.89-101
• /
• 2005

Research on highly abstracted system modeling and simulation has received a great deal of attention as of the concept of platform based design is becoming ubiquitous. From a practical design point of view, such modeling and simulation must consider the following: (i) fast simulation speed and cycle accuracy, (ii) early availability for early stage software development, (iii) inter-operability with external tools for software development, and (iv) reusability of the models. Unfortunately, however, all of the previous works only partially addresses the requirements, due to the inherent conflicts among the requirements. The objective of this study is to develop a new system design methodology to effectively address the requirements mentioned above. We propose a new transaction-level system modeling methodology, called ViP (Virtual Platform). We propose a two-step approach in the ViP method. In phase 1, we create a ViP for early stage software development (before RTL freeze). The ViP created in this step provides high speed simulation, lower cycle accuracy with only minor modeling effort.(satisfying (ii)). In phase 2, we refine the ViP to increase the cycle accuracy for system performance analysis and software optimization (satisfying (i)). We also propose a systematic ViP modeling flow and unified interface scheme based on utilities developed for maximizing reusability and productivity (satisfying (ii) and (iv)) and finally, we demonstrate VChannel, a generic scheme to provide a connection between the ViP and the host-resident application software (satisfying (iii)). ViP had been applied to several System-on-a-chip (SoC) designs including mobile applications, enabling engineers to improve performance while reducing the software development time by 30% compared to traditional methods.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.196-197
• /
• 2014

Low carbon construction is an important operation management goal such as cost, time, and quality in construction community. This paper introduces a system which measures the variability of carbon dioxide amounts. First, this system allows creating construction operation models of which the level of detail is breakdown into the work task level. Second, the system implements sensitivity analysis along with a ranges of resources that are allocated in an operation model. It facilitates to find the optimal resource combination using the operation performances such as the amount of emissions, operation completion time, and cost. Lastly, it identifies the best fit probability distribution functions of performance criteria given a certain resource combination. It allows project manager to query the percentages to complete the operation within a limitation specified by the system users.

• 산업경영시스템학회지
• /
• 제38권3호
• /
• pp.136-148
• /
• 2015

We analyzed the effect of three different types of inventory systems for saving the total cost using simulation on the system where multiple depots and many retailers disperse on the limited area. Three types of inventory systems are single echelon system with inventory exchange and two-echelon system and the variant two-echelon system. Variant two echelon system is the two-echelon system where the inventory transshipmentsare allowed on every two stage inventory echelons. Inventories kept on every retailer are commonly used for all retailers when certain retailer has stock-out. And when all retailers are stock-out, inventories kept on every depot are commonly used for the retailers whose assigned depots are stock-out. These all three systems are simulated with the constraint of service level on wide range of parameter settings. Simulation results show that cost saving effect appear clear for single echelon system and two-echelon system when shortage cost portion and transportation cost portion becomes large respectively irrespective of depot number. Variant two echelon system seems to be superior to two other systems when transportationcost portion becomes very small. But this superiority is not proved in terms of statistics. So we may conclude that the variant two echelon system may be useless with the higher administrative efforts due to frequent inventory exchange. Also we note that the traditional two echelon system becomes inferior to two other systems in terms of statistics when service level becomes high or when demand variance becomes very large. And inventory integration effect that cost becomes saved when depot number decrease, diminishes when transportation cost or stock-out cost increases irrespective of inventory systems.

• 농촌계획
• /
• 제20권2호
• /
• pp.103-114
• /
• 2014

The objective of this study was to develop agricultural reservoir water supply simulation system to assess water cycle of agricultural water district. Developed system was named as ARWS (Agricultural Reservoir Water supply simulation System). ARWS consists of platform and independent modules. In ARWS, reservoir inflow was calculated using Tank model, and agricultural water supply was calculated considering current farming period and mid-summer drainage. ARWS was applied to simulate water level of Gopung and Tapjung reservoir in 2011 - 2012. The results were compared to simulation results of HOMWRS and observed data. Average $R^2$, EI, RMSE of ARWS were 0.76, 0.46, 1.78 (m), average $R^2$, EI, RMSE of HOMRWS were 0.88, -0.14, 2.37 (m) respectively. Considering statistical variances, water level simulation results of ARWS were more similar to observed data than HOMWRS. ARWS can be useful to estimate reservoir water supply and assess hydrological processes of agricultural water district.

• 한국항공우주학회지
• /
• 제37권6호
• /
• pp.602-608
• /
• 2009

IEEE(Institute of Electrical and Electronics Engineers)1516 에 규정된 HLA(High Level Architecture) 기반 기술은 상이한 목적으로 개발된 다수의 개별 시뮬레이션들이 결합된 복합 시뮬레이션 네트워크 시스템을 구성하는데 있어서 필수적 요소이다. 본 논문에서는 상용 비행 시뮬레이션을 HLA를 기반으로 구현하는 과정과 구현된 시스템의 동작 과정을 보여줌으로써 확장성 및 상호 운용성을 갖춘 비행 시뮬레이션 모델 구조를 제시하였다. 또한 HLA를 기반으로 구현된 실시간 시뮬레이션 시스템과 상용 비행 시뮬레이션을 비교하여 얻어진 비행 정보 데이터 분석을 통해 완벽한 실시간성을 보장할 수 있는 지에 대한 여부를 판단하였다.

• Korean Chemical Engineering Research
• /
• 제53권5호
• /
• pp.545-552
• /
• 2015

복합발전 공정의 모델링 및 모사는 공정의 운전 및 설계 조건에 따른 공정변수의 변화를 정량적으로 예측하기 위한 중요한 접근방법이다. 본 연구에서는 현재 사용되는 복합발전공정의 정상상태 모사기의 단점을 보완하여, 사용자의 편의성과 개발자의 핵심기술 모델링을 가능하게 하는 공정 모델링 시스템을 개발하였다. 복합발전 공정의 주요 장치들을 분석하여 수학적 모델을 개발하였으며 이를 종합하여 모델라이브러리로 구성하였다. 또한 모사의 목적과 입수 가능한 자료에 따라 사용되는 모델의 상세도가 다르다는 점을 고려하여 주요장치에 대해 다른 상세도의 모델을 개발하였다. 복합발전 상업공정을 개발된 모델링 시스템을 사용하여 모델링과 모사를 수행하였으며 모사의 결과를 데이터자료와 비교 검증하였다. 검증의 모사결과와 자료데이터는 1% 내의 오차를 보였으며 개발된 모델링 시스템이 실제 공정에 응용될 수 있음을 보여주었다.

• 한국CDE학회논문집
• /
• 제18권3호
• /
• pp.224-233
• /
• 2013

For the scheduling and the job assignment of the ship hull production design which is a process-based work, we suggest the simulation-based scheduling using the discrete-event-based business process simulation. First, we analyze the ship hull production design process from the perspective of a job assignment to make it into the simulation model using DEVS (Discrete Event System Specification) which is the representative modeling method for a discrete-event simulation. Based on the APIs of the open-source discrete-event simulation engine, we implement the simulation using the Groovy script. We develop the scenario generator in which the user defines detail information of the construction drawing and its member blocks, and design engineers information, and the various setting for the simulation including the job assignment strategy. We use the XML files from this scenario generator as inputs of simulation so that we can get simulation result in forms of Gantt chart without changes of the simulation model.