• 한국CDE학회논문집
• /
• 제12권6호
• /
• pp.441-451
• /
• 2007

In this paper, the method to modify a surface through three dimensional vector field technique is presented, In this method two guide surfaces are required as a shape reference. One is the shape of original surface, the other is the target shape for the result surface. Proposed method is consists of two steps. The first step is to calculate the mapping points on original and target guide surfaces so that the shape error may be minimized. The second step is to construct the smooth vector field from mapping points of the first step. The developed method is applied to shoe design system which makes the surface modeling very easy and effective.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.376-385
• /
• 2007

Construction project is necessary element for human life to upgrade the quality and convenience. However, due to its contradictory nature to the environment preservation, environmental pollution and damage, deterioration of natural scenery, noise/vibration, water quality pollution, etc. caused in the process of construction greatly affect the environment. For the building or construction project, its possible impact on environment during construction work and after completion must be predicted at its design phase, which will result in the completion of the architecture convenient for human being with its environmental pollution reduced to minimum level. In this study, the checklist of environmental factors was suggested, which should be taken into account at its design phase in conducting the construction work. Proposed checklist was linked with the developed web-based system for the convenience of users like designer and construction manager, etc. It is expected that the checklist suggested by this study will help the designer and construction manager to continue the steady development from the environmental viewpoint during the design phase.

• 한국산학기술학회논문지
• /
• 제13권10호
• /
• pp.4411-4417
• /
• 2012

본 연구에서는 축소모델을 기반으로 비행체 날개를 최적화하는 기법을 제안한다. 잘 구축된 축소모델은 고유치 문제나 동적 해석 시 정확한 해석결과를 제공하며, 최적화 과정에서 필요한 민감도 계산에서도 정확한 결과를 제공할 수 있다. 이러한 축소모델은 모드기반으로 구축되는 축소차수모델(Reduce Order Model)과 자유도기반으로 구축되는 축소시스템(Reduced System)으로 구분되는데, 본 연구에서 사용하는 자유도 기반 축소시스템은 구조물의 거동에 지배적인 자유도를 적절히 선정하는 것이 중요하므로, 이를 위하여 기존 연구에서 신뢰성이 검증된 2단계 축소방법을 사용하였고, IRS(Improved Reduced System)에 의해 최종시스템을 구축하였다. 수치예제에서 최적화 과정에서 계산되는 등가응력, 고유치 및 설계민감도는 모두 축소시스템 기반으로 구해지며, 축소시스템을 통해 구속조건을 잘 만족하면서 목적함수에 대한 최적 결과를 얻을 수 있음을 보인다.

• 품질경영학회지
• /
• 제47권1호
• /
• pp.187-198
• /
• 2019

Purpose: In this study, a reliability prediction based reliability growth management is suggested especially for the early development phase of a system and the case study of surveillance system is given. Methods: The proposed reliability prediction based reliability growth management procedures consists of 7 Steps. In Step 1, the stages for reliability growth management are classified according to the major design changes. From Step 2 to Step 5, system reliability is predicted based on reliability structures and the predicted reliabilities of subsystems (Level 2) and modules (Level 3). At each stage, by comparing the predicted system reliability with that of the previous stage, the reliability growth of the system is checked in Step 6. In Step 7, when the predicted value of sustem reliability does not satisfy the reliability goal, some design alternatives are considered and suggested to improve the system reliability. Results: The proposed reliability prediction based reliability growth management can be an efficient alternative for managing reliability growth of a system in its early development phase. The case study shows that it is applicable to weapon system such as a surveillance system. Conclusion: In this study, the procedures for a reliability prediction based reliability growth management are proposed to satisfy the reliability goal of the system efficiently. And it is expected that the use of the proposed procedures would reduce, in the test and evaluation phase, the number of corrective actions and its cost as well.

• ETRI Journal
• /
• 제25권6호
• /
• pp.464-474
• /
• 2003

Component-based development leverages software reusability and reduces development costs. Enterprise JavaBeans (EJB) is a component model developed to reduce the complexity of software development and to facilitate reuse of components. However, EJB does not support component assembly by a plug-and-play technique due to the hard-wired composition at the code level. To cope with this problem, an architecture for EJB component assembly is defined at the abstract level and the inconsistency between the system architecture and its implementation must be eliminated at the implementation level. We propose a component-based application development tool named the COBALT assembler that supports the design and implementation of EJB component assembly by a plug-and-play technique based on the architecture style. The system architecture is first defined by the Architecture Description Language (ADL). The wrapper code and glue code are then generated for the assembly. After the consistency between the architecture and its implementation is checked, the assembled EJB components are deployed in an application server as a new composite component. We use the COBALT assembler for a shopping mall system and demonstrate that it can promote component reuse and leverage the system maintainability.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.185-190
• /
• 1995

Conventional alarm system has many difficulties in the operator's identifying the plant status during special situations such as design basis accidents. To solve the shortcomings, an on-line alarm annunciator system, called dynamic alarm console (DAC), was developed. In the DAC, a signal is generated as alarm by the use of an adaptive setpoint check strategy based on operating mode, and time delay technique is used not to generate nuisance alarms. After alarm generation, if activated alarm is a level precursor alarm or a consequencial alarm, it would be suppressed, and the residual alarms go through dynamic prioritization which provide the alarms with pertinent priorities to the current operating mode. Dynamic prioritization is achieved by going through the system- and mode-oriented prioritization. The DAC has the alarm hierarchical structure based on the physical and functional importance of alarms. Therefore the operator can perceive alarm impacts on the safety or performance of the plant with the alarm propagation from equipment level to plant functional level. In order to provide the operator with the most possible cause of the event and quick cognition of the plant status even without recognizing the individual alarms, reactor trip status tree (RTST) was developed. The DAC and the RTST have been simulated with on-line data obtained from the full-scope simulator for several abnormal cases. The results indicated that the system can provide the operator with useful and compact information fur the earlier termination and mitigation of an abnormal state.

• The International Journal of Costume Culture
• /
• 제3권3호
• /
• pp.235-245
• /
• 2000

The purposes of this study were 1) to investigate usage level of production strategies based on group of production environment, 2) to investigate usage level of production systems based on group of production strategy, and 3) to analyze each of company performance based on group of production strategy and system. For this study, the questionnaires were administered to 215 apparel manufactures in metropolitan area from Feb. to Mar. 1998. Employing a sample of 201, data were analyzed by factor analysis, descriptive statistics, cluster analysis, discriminant analysis, and multivariate analysis of variance. The following are the results of this study. 1. Concerning production strategy due to group of production environment, the stable group and the complicated group prefer to rice/quality centered strategy but the level of usage for strategies is so pretty that it is not significant to carry out them. 2. Concerning production system due to group of production strategy, the workers centered group is occupied high in the price/quality centered group & the complex group. And also the product centered system is occupied high in the flexibility centered group. 3. Concerning company performance due to group of production strategy and system, the price/quality centered group holds low position of performance comparing to another groups. And the performance of the managers centered group is higher than that of the workers.

• 한국항해항만학회지
• /
• 제42권5호
• /
• pp.323-330
• /
• 2018

The Korean e-Navigation system is a Korean approach to correspond with implementation of IMO e-Navigation. It provides five services, among them SV20 service, a ship remote monitoring system that collects and processes sensor information related to fire, navigation, and seakeeping performance safety. The system also detects abnormal conditions such as fires, capsizing, sinking, navigation equipment failure during navigation, and calculates the safety index and determines the emergency level. According to emergency level, it provides appropriate emergency response guidance for the onboard operator. The fire safety module is composed of three sub-modules; each module is the safety index sub-module, the emergency level determination sub-module and emergency response guidance sub-module. In this study, operational concept of the fire safety module in SV20 service is explained, and fire safety assessment factors are estimated, to calculate the fire safety index. Fire assessment factors included 'Fire detector position factor,' 'Smoke diffusion rate factor,' and 'Fire-fighting facilities factor.'

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권11호
• /
• pp.5588-5613
• /
• 2018

Virtualization technology has been widely applied in the area of computer security research that provides a new method for system protection. It has been a hotspot in system security research at present. Virtualization technology brings new risk as well as progress to computer operating system (OS). A multi-level perception security model using virtualization is proposed to deal with the problems of over-simplification of risk models, unreliable assumption of secure virtual machine monitor (VMM) and insufficient integration with virtualization technology in security design. Adopting the enhanced isolation mechanism of address space, the security perception units can be protected from risk environment. Based on parallel perceiving by the secure domain possessing with the same privilege level as VMM, a mechanism is established to ensure the security of VMM. In addition, a special pathway is set up to strengthen the ability of information interaction in the light of making reverse use of the method of covert channel. The evaluation results show that the proposed model is able to obtain the valuable risk information of system while ensuring the integrity of security perception units, and it can effectively identify the abnormal state of target system without significantly increasing the extra overhead.

• 정보처리학회논문지A
• /
• 제12A권5호
• /
• pp.375-384
• /
• 2005

연성 실시간 특성을 가진 멀티미디어 응용 프로그램이 일정한 서비스 품질을 유지하고 수행되기 위해서는 커널 수준과 사용자 수준에서 실시간 처리를 요구한다. 본 연구에서는 널리 사용되는 범용 운영체제 환경에서 멀티미디어를 지원하는데 있어서 문제가 되는 부분을 살펴보고 이를 개선할 수 있는 다단계 스케줄러를 제안한다. 다단계 스케줄러는 사용자 피드백을 기반으로 스케줄링 정보를 생성하는 상위 스케줄러와 커널에 구현된 하위 스케줄러로 구성된다. 제안한 다단계 스케줄러를 리눅스에서 구현하고 성능 분석을 수행하였으며, 실험 결과, 제안한 방식이 시스템에 성능 저하를 발생시키지 않으면서 멀티미디어의 서비스 품질을 일정하게 보장하는 것을 확인하였다.